Motorola WHISPER User manual

MOTOROLA
WHISPER
EN

EN Check it out 1
Check it out
here’s what you can do
Enjoy crystal-clear hands-free audio whenever
and wherever you want it, with your
MOTOROLA Whisper Bluetooth® headset. The
world's first retractable boom headset with four
microphones.
Go ahead, check it out:
At a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Charge it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connect & go. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Want more?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Safety, Regulatory & Legal . . . . . . . . . . . . . . . . . . . . . 20
Caution: Please read the important safety,
regulatory and legal information at the back of
this guide.

2At a glance EN
At a glance
the important bits, quick and easy
Status
Light
Tu rn
on & off
Retractable Boom
Microphone
Volume
Buttons
Call Button
Charge
(Micro
USB)
Ear Hook
Microphone
Microphone

EN At a glance 3
Turn on & Off
Slide the switch towards the retractable boom to
turn your headset on. Slide the switch away from
the retractable boom to turn your headset off.
ON

4At a glance EN
Wear
Pull up to engage the ear hook and down to
remove it. When engaged, the ear hook can
swivel to make fitting easier.
Tip: Pivot the ear-hook to wear it in the left ear.
Rotate & turn ear hook for
right or left use
Ear Hook SwivelsWear
Right Ear Left Ear

EN Charge it 5
Charge it
let’s get you up and running
Note: Fully charge the headset before you use it.
Status Light
Solid Green - fully charged battery
FlashingGreen - highly charged battery
FlashingYellow - mediumcharged battery
FlashingRed - low charged battery

6Charge it EN
You can charge the headset in two ways:
•Plug a charger directly into the headset’s
micro USB port.
•Connect your headset to a computer with a
micro USB cable.
Caution: Your battery is designed to last the life
of your device. It should only be removed by a
recycling facility. Any attempt to remove or
replace your battery will damage the device, void
your warranty, and could cause injury.
Tip: To save battery power, turn off the headset
when you’re not using it.

EN Connect & go 7
Connect & go
let’s get you connected
2
Turn on the headset and follow the
voice prompts.
4
When the device and headset connect,
you’ll hear “pairingcomplete”.
3
Go to the Bluetooth option on your device
to pair & connect with the headset. Enter
passcode 0000 if prompted.
1
Turn on Bluetooth on your device.

8Basics EN
Basics
standard features, advanced quality
Calls
To…
make a voice
dial call
Press the Call button to
activate voice recognition.
answer a call Press the Call button.
change call
volume
Press the Volume Up or
Volume Down button. To
quickly change volume, press
and hold the Volume Up or
Volume Down button.
reject a call Press and hold the Volume Up
or Volume Down button until
you hear a tone.
end a call Press the Call button.

EN Basics 9
Notes:
•Some features are phone/network dependent.
redial last
call
Please use your phone to
redial the last call.
mute or
unmute a
call
Press and hold the Volume Up
and Volume Down buttons
until you hear “mute on” or
“mute off”.
answer a
second
incoming
call
Press the Call button.
reject a
second call
Press and hold the Volume Up
or Volume Down button until
you hear a tone.
To…

10 Basics EN
•Using a mobile device or accessory while
driving may cause distraction and may be
illegal. Always obey the laws and drive safely.
status light
light shows… your headset is…
two blue blinks,
pause, repeat
powered on &
searching for a device
steady blue fading
out
powering off
steady blue connected to a device
flashing red charging, battery at
low power
flashing yellow charging, battery at
medium power
flashing green charging, battery at
high power

EN Basics 11
music
Note: This feature is phone dependent.
Bluetooth® music can be streamed from your
phone. Start and control music playback from
your phone.
Music pauses when you make or receive a call.
When the call ends, music resumes playing.
Clean & dry
To get the most from your headset, keep it clean
and dry.
•High humidity or perspiration can make the
ear fitting feel slippery. Wipe the ear fitting
with a soft cloth to remove dirt and moisture.
steady green connected to charger,
battery fully charged
light shows… your headset is…

12 Basics EN
Note: Be very careful when wiping near the
speaker.
•Check for and remove any debris that may
be blocking the speaker or microphones.

EN Advanced 13
Advanced
more clever stuff
Second device
Using two phones? Or maybe a phone and a
tablet? Connect with two devices.
1Separately pair each device with the headset
as normal (see “Connect & go” on page 7).
2Once paired, to connect to both devices
simply turn them on. You’ll hear
“<device x> connected” as each device
connects with your headset.
Notes:
• Two phones connected, not on a call: Press
the Call button to activate voice recognition on
the first phone. Double-press it to activate
voice recognition on the second phone.

14 Advanced EN
• Two phones connected, single held call on
each phone: Press the Call button to return to
the call on the first phone. Double-press it to
return to the call on the second phone.
Caller ID
Note: This feature is phone/network dependent.
If the phone supports the Phonebook Access
profile, you’ll hear “call from <caller’s name>”
when the contact info is stored on your phone.
Note: This feature doesn’t work when you’re on
a call and you receive a second incoming call.
Battery readout
You hear a voice prompt, that tells you how
much talk time you have left when you turn on
your headset.
When you’re not in a call, press the Volume Up
and Volume Down buttons to hear how much
battery talk-time is left on your headset.

EN Advanced 15
To save battery power, turn off the headset when
you don't use it for an extended time.
Settings
Press and hold the Call button while turning on
the headset, then follow the voice prompts to
turn these features on/off:
• Restore Factory Settings: Reset default
settings on your headset.
Caution: This feature erases all pairing
information stored on the headset.
• Voice Interface: Voice dial calls, and more.
• Caller ID Alert: Hear caller ID for incoming
calls.
• Multipoint: Connect your headset to two
phones.
•Wide-band: Use HD Audio Plus for increased
clarity and richer sound.

16 Advanced EN
Note: Both Phone and Network need to
support Wide-band.
•VoiceAnswer: Speak to answer incoming
calls.

EN Want more? 17
Want more?
we’re here to help
Troubleshooting
A few frequently asked questions—with
answers, of course. Find more at
www.motorola.com/support.
• My headset will not enter pairing mode
Make sure that any devices previously paired
with the headset are turned off. If the
indicator light is flashing blue, first turn the
headset off and on. You’ll hear “Whisper is
ready to pair”.
• My phone doesn't find my headset when
searching
Press and hold the Call button, and turn your
headset on. Follow voice prompts to reset
headset. You’ll hear “Welcome to the
Motorola Whisper, ready to pair”.

18 Want more? EN
Connect with Motorola
•Answers:Guides, online help, and more at
www.motorola.com/support.
• Support: Visit www.motorola.com/support or
contact the Motorola Customer Support
Center at: 1-800-331-6456 (United States),
1-888-390-6456 (TTY/TDD United States for
hearing impaired), or 1-800-461-4575
(Canada).
• Bluetooth®: If you have questions or need
assistance, contact us at 1-877-MOTOBLU, or
visit www.motorola.com/bluetoothsupport or
www.motorola.com/bluetoothconnect.
• Accessories: Find more accessories at
www.motorola.com/products.

EN Want more? 19
•Social:The latest news, tips & tricks, videos
and so much more—join us on:
YouTube™ www.youtube.com/motorola
Facebook® www.facebook.com/motorola
Tw i tt e r www.twitter.com/motomobile
Google+™ www.google.com/+