MSI MS-7846 User manual
Preface
1
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks in this manual are properties of their respective owners.
MSI®is registered trademark of Micro-Star Int’l Co.,Ltd.
NVIDIA®is registered trademark of NVIDIA Corporation.
ATI®is registered trademark of AMD Corporation.
AMD®is registered trademarks of AMD Corporation.
Intel®is registered trademarks of Intel Corporation.
Windows®is registered trademarks of Microsoft Corporation.
AMI®is registered trademark of American Megatrends Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster®is registered trademark of Creative Technology Ltd.
Realtek®is registered trademark of Realtek Semiconductor Corporation.
JMicron®is registered trademark of JMicron Technology Corporation.
Netware®is registered trademark of Novell, Inc.
Lucid®is trademark of LucidLogix Technologies, Ltd.
VIA®is registered trademark of VIA Technologies, Inc.
ASMedia®is registered trademark of ASMedia Technology Inc.
iPad, iPhone, and iPod are trademarks of Apple Inc.
Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.
Revision History
Revision Revision History Date
V5.0 First release 2015/01
G52-78461X9
Downloaded from ManualsNet.com search engine
Preface
2
Safety Instructions
Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is at 110/220V before connecting the
equipment to the power inlet.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or module.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that can cause damage or cause electrical
shock.
If any of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well or you can not get it work according to
User’s Manual.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC
(140oF), IT MAY DAMAGE THE EQUIPMENT.
California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Taiwan:
For better environmental protection, waste batteries should be
collected separately for recycling or special disposal.
European Union:
Batteries, battery packs, and accumulators should not be disposed
of as unsorted household waste. Please use the public collection
system to return, recycle, or treat them in compliance with the local
regulations.
Battery Information
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Downloaded from ManualsNet.com search engine
Preface
3
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
interference by one or more of the measures listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7846
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation.
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device is
in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment and its antenna should be installed and
operated with minimum distance 20 cm between the radiator and your body. This
equipment and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
Downloaded from ManualsNet.com search engine
Preface
4
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public
Directive.
Taiwan Wireless Statements
Japan VCCI Class B Statement
Korea Warning Statements
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html
Japan JIS C 0950 Material Declaration
that manufacturers provide material declarations for certain categories of electronic
product, see the MSI web site at :
http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule
2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight
% and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of
the Rule.
Downloaded from ManualsNet.com search engine
Preface
5
Turkey EEE regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine restriction of hazardous substances
The equipment complies with requirements of the Technical Regulation, approved
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment.
Vietnam RoHS
This product complies with Circular 30/2011/TT-BCT regulating the permitted limits
for a number of hazardous substances in electronic and electric products.
(Pb)
(Hg)
(Cd)
(Cr6+)
(PBB)
(PBDE)
Downloaded from ManualsNet.com search engine
Preface
6
WEEE Statement
WEEE (Waste Electrical and Electronic Equipment)
ENGLISH
To protect the global environment and as an environmentalist, MSI must
remind you that...
Under the European Union (“EU”) Directive on Waste Electrical and
products of “electrical and electronic equipment” cannot be discarded as municipal
wastes anymore, and manufacturers of covered electronic equipment will be
obligated to take back such products at the end of their useful life. MSI will comply
with the product take back requirements at the end of life of MSI-branded products
that are sold into the EU. You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen
Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.
MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt,
die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines
Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
Au sujet de la directive européenne (EU) relative aux déchets des équipement
que les produits électriques et électroniques ne peuvent être déposés dans les
européenne. Par conséquent vous pouvez retourner localement ces matériels dans
les points de collecte.
Downloaded from ManualsNet.com search engine
Preface
7
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente,
recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o
equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los
depositados en los contenedores habituales de su municipio, los fabricantes de
equipos electrónicos, están obligados a hacerse cargo de dichos productos al
termino de su período de vida. MSI estará comprometido con los términos de
vida. Usted debe depositar estos productos en el punto limpio establecido por el
ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida
de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan
kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort
producten worden verplicht om producten retour te nemen aan het eind van hun
levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen
geretourneerd worden op lokale inzamelingspunten.
SRPSKI
sredini, MSI mora da vas podesti da…
Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji
ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su
POLSKI
wyznaczonych punktach zbiorczych.
Downloaded from ManualsNet.com search engine
Preface
8
TÜRKÇE
MAGYAR
fellépve az MSI emlékezteti Önt, hogy ...
és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint
hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az
ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja
a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az
EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali
Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti
appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più
ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione
punto di raccolta
Downloaded from ManualsNet.com search engine
Preface
9
Contents
English......................................................................................11
....................................................................................12
Back Panel..............................................................................................................14
....................................................................................15
Memory Installation.................................................................................................17
Internal Connectors.................................................................................................18
BIOS Setup.............................................................................................................25
.......................................................................................33
.........................................................................................................34
.................................................................................................................36
.............................................................................................37
.............................................................................................................39
.............................................................................................................40
...............................................................................................................47
....................................................................................55
..........................................................................................................56
Panneau Arrière......................................................................................................58
Installation du CPU et son ventilateur.....................................................................59
Installation de mémoire...........................................................................................61
Connecteurs d’alimentation ....................................................................................62
.................................................................................................69
Deutsch ....................................................................................77
........................................................................................................78
Rücktafel-Übersicht.................................................................................................80
......................................................................................81
Speicher..................................................................................................................83
Interne Anschlüsse .................................................................................................84
BIOS Setup.............................................................................................................91
....................................................................................99
..................................................................100
.....................................................................................................102
.................................................................................103
.................................................................................................................105
..........................................................................................106
...................................................................................................113
Downloaded from ManualsNet.com search engine
Preface
10
.................................................................................121
................................................................................................................122
................................................................................................................124
....................................................................................................125
................................................................................................................127
................................................................................................................128
.............................................................................................................135
.................................................................................141
............................................................................................................142
.......................................................................................................................144
...........................................................................................145
............................................................................................................147
................................................................................................................148
.............................................................................................................155
.....................................................................................161
..............................................................................................162
..............................................................................................................164
...........................................................................165
........................................................................................................167
.....................................................................................................168
...........................................................................................................175
Downloaded from ManualsNet.com search engine
English
11
English
Thank you for choosing the H81M PRO-VH/ H81M PRO-VD Series (MS-7846 v5.X)
Micro-ATX motherboard. The H81M PRO-VH/ H81M PRO-VD Series motherboards
advanced Intel LGA1150 processor, the H81M PRO-VH/ H81M PRO-VD Series
motherboards deliver a high performance and professional desktop platform solution.
Layout
BAT1
JTPM1
JAUD1
JCOM1
JBK1 JFP1 JUSB1
SYSFAN1
CPUFAN1
JPWR2
JPWR1
DIMM1
DIMM2
JCI1
SATA4SATA2SATA
3S
ATA1
JBAT1
JUSB2
PCI_E1
PCI_E2
PCI_E3
Top : mouse
Bottom: keyboard
Top: LAN jack
Bottom: USB ports
T:Line-In
M:Line- Out
B:MIC-Int
USB2.0 ports
USB3.0 ports
DVI port (H81M P-V)RO D
VGA port
port (H81M P-VH)HDMIRO
JUSB3
Downloaded from ManualsNet.com search engine
English
12
CPU
Support
4th Generation Intel®Core™ i7 / Core™ i5 / Core™ i3 /
Pentium®/ Celeron® processors for LGA 1150 socket
Chipset Intel® H81 Express Chipset
Memory
Support
2x DDR3 memory slots supporting up to 16GB
Supports DDR3 1600/ 1333/ 1066 MHz
Dual channel memory architecture
Expansion
Slots
1x PCIe 2.0 x16 slot
2x PCIe 2.0 x1 slots
Onboard
Graphics
1x VGA port, supporting a maximum resolution of 1920x1200
@ 60Hz, 24bpp
1x HDMI port (H81M PRO-VH), supporting a maximum
resolution of 2560x1600@60Hz, 24bpp/ 1920x1080@60Hz,
36bpp
1x DVI-D port (H81M PRO-VD), supporting a maximum
resolution of 1920x1200 @60Hz
Storage Intel H81 Express Chipset
- 2x SATA 6Gb/s ports (SATA1~2)
- 2x SATA 3Gb/s ports (SATA3~4)
- Supports Intel Smart Connect Technology
USB Intel H81 Express Chipset
- 2x USB 3.0 ports on the back panel
- 8x USB 2.0 ports (4 ports on the back panel, 4 ports
available through the internal USB connectors)
VIA VL806 Chipset
- 2x Internal USB 3.0 connectors
Audio Realtek®ALC887 Codec
LAN Realtek®RTL8111G Gigabit LAN controller
Back Panel
Connectors
1x PS/2 keyboard port
1x PS/2 mouse port
1x VGA port
1x HDMI port (H81M PRO-VH)
1x DVI-D port (H81M PRO-VD)
4x USB 2.0 ports
2x USB 3.0 ports
1x LAN (RJ45) port
3x audio jacks
Downloaded from ManualsNet.com search engine
English
13
Internal
Connectors
1x 24-pin ATX main power connector
1x 4-pin ATX 12V power connector
2x SATA 6Gb/s connectors
2x SATA 3Gb/s connectors
2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
1x USB 3.0 connector (supports additional 2 USB 3.0 ports)
1x 4-pin CPU fan connector
1x 4-pin system fan connector
1x Front panel audio connector
1x Serial port connector
1x TPM connector
2x System panel connectors
1x Chassis Intrusion connector
1x Clear CMOS jumper
BIOS
Features
UEFI AMI BIOS
ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0
Multi-language
Form Factor Micro-ATX Form Factor
9.1 in. x 6.8 in. (23.1 cm x 17.3 cm)
For the latest information about CPU, please visit
http://www.msi.com/cpu-support/
For more information on compatible components, please visit
http://www.msi.com/test-report/
Downloaded from ManualsNet.com search engine
English
14
Back Panel
LAN LED Indicator
LINK/ACT
LED
SPEED
LED
LED LED Status Description
Link/ Activity LED
No link
Yellow Linked
Blinking Data activity
Speed LED
10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
H81M PRO-VH
H81M PRO-VD
PS/2 Mouse
PS/2 Keyboard
USB 2.0
USB 3.0
HDMI
VGA
Line-In
Line-Out
Mic
USB 2.0
LAN
PS/2 Mouse
PS/2 Keyboard
USB 2.0
USB 3.0
DVI-D VGA
Line-In
Line-Out
Mic
USB 2.0
LAN
Downloaded from ManualsNet.com search engine
English
15
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability. Follow the steps
below to ensure correct CPU and heatsink installation. Wrong installation can
damage both the CPU and the motherboard.
1. Push the load lever down to unclip it and lift to the fully open position.
2. The load plate will automatically lift up as the load lever is pushed to the fully
open position.
Important
Do not touch the socket contacts or the bottom of the CPU.
Video Demonstration
address below.
http://youtu.be/bf5La099urI
Alignment Key
CPU notches
3. Align the notches with the socket alignment keys. Lower the CPU straight down,
without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is
properly seated in the socket.
4. Close and slide the load plate under the retention knob. Close and engage the
load lever.
Downloaded from ManualsNet.com search engine
English
16
Thermal paste
Important
your system.
Whenever the CPU is not installed, always protect the CPU socket pins by
covering the socket with the plastic cap.
If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
5. When you press down the load lever the PnP cap will automatically pop up from
the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the
CPU is removed from the socket.
6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the
CPU. This will help in heat dissipation and prevent CPU overheating.
7. Locate the CPU fan connector on the motherboard.
8. Place the heatsink on the motherboard with the fan’s cable facing towards the
fan connector and the fasteners matching the holes on the motherboard.
9. Push down the heatsink until the four fasteners get wedged into the holes on
the motherboard. Press the four fasteners down to fasten the heatsink. As each
fastener locks into position a click should be heard.
10. Inspect the motherboard to ensure that the fastener-ends have been properly
locked in place.
11. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.
Downloaded from ManualsNet.com search engine
English
17
Memory Installation
Video Demonstration
Watch the video to learn how to install memories at the address below.
http://youtu.be/76yLtJaKlCQ
1
2
3
Important
DDR3 memory modules are not interchangeable with DDR2, and the DDR3
standard is not backward compatible. Always install DDR3 memory modules in
DDR3 DIMM slots.
To ensure system stability, memory modules must be of the same type and density
in Dual-Channel mode.
Downloaded from ManualsNet.com search engine
English
18
Internal Connectors
JPWR1~2: ATX Power Connectors
These connectors allow you to connect an ATX power supply. To connect the ATX
cable into the connector. If done correctly, the clip on the power cable should be
hooked on the motherboard’s power connector.
Video Demonstration
Watch the video to learn how to install power supply connectors.
http://youtu.be/gkDYyR_83I4
13.+3.3
V
1.+3.3
V
14.-12V
2.+3.3V
15.Ground
3.Ground
16.PS-ON#
4.+5V 17.Ground
5.Ground
18.Ground
6.+5V
19.Ground
7.Ground
22.+5V
10.+12V
20.Res
8.PWR O K
23.+5V
11.+12V
21.+5V
9.5VSB
24.Ground
12.+3.3V
JPWR1
3.+12V
1
.Ground
4.+12V
2
.Ground
JPWR2
Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.
JCOM1: Serial Port Connector
This connector is a 16550A high speed communication port that sends/receives 16
bytes FIFOs. You can attach a serial device.
1.DC
D
3.SOUT
1
0.No Pin
5.Groun
d
7.RT
S
9.R
I
8.CTS
6.DSR
4.DTR
2
.SIN
Downloaded from ManualsNet.com search engine
English
19
SATA1~4: SATA Connectors
This connector is a high-speed SATA interface port. Each connector can connect to
one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD),
and optical drives (CD/ DVD/ Blu-Ray).
Video Demonstration
Watch the video to learn how to Install SATA HDD.
http://youtu.be/RZsMpqxythc
SATA3
SATA1~2: SATA 6Gb/s connectors
SATA3~4: SATA 3Gb/s connectors
SATA4
SATA1
SATA2
Important
Many SATA devices also need a power cable from the power supply. Such devices
include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD /
Blu-Ray). Please refer to the device’s manual for further information.
Many computer cases also require that large SATA devices, such as HDDs, SSDs,
and optical drives, be screwed down into the case. Refer to the manual that came
with your computer case or your SATA device for further installation instructions.
Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise.
SATA cables have identical plugs on either sides of the cable. However, it is
saving purposes.
Downloaded from ManualsNet.com search engine
English
20
JCI1: Chassis Intrusion Connector
This connector connects to the chassis intrusion switch cable. If the computer case
is opened, the chassis intrusion mechanism will be activated. The system will record
must enter the BIOS utility and clear the record.
2.CINTRU
1.Ground
CPUFAN1, SYSFAN1: Fan Power Connectors
The fan power connectors support system cooling fans with +12V. If the motherboard
has a System Hardware Monitor chipset on-board, you must use a specially designed
fan with a speed sensor to take advantage of the CPU fan control. Remember to
connect all system fans. Some system fans may not connect to the motherboard and
will instead connect to the power supply directly. A system fan can be plugged into
any available system fan connector.
1.Ground
2.+12V
3.Sense
4.Speed Contro
l
CPUFAN1
1.Ground
2.Speed Contro
l
3.Sense
4.NC
SYSFAN1
Important
recommended CPU heatsink.
These connectors support Smart Fan Control with liner mode. The Command
Center utility can be installed to automatically control the fan speeds according to
the CPU’s and system’s temperature.
If there are not enough ports on the motherboard to connect all system fans,
adapters are available to connect a fan directly to a power supply.
Downloaded from ManualsNet.com search engine
Table of contents
Languages:
Other MSI Computer Hardware manuals
MSI
MSI MS-98N1 User manual
MSI
MSI ThunderboltM3 User manual
MSI
MSI MS-6855C User manual
MSI
MSI SLI BRIDGE KIT User manual
MSI
MSI 945GT Speedster User manual
MSI
MSI B360-F PRO User manual
MSI
MSI MEG CORELIQUID S360 User manual
MSI
MSI TV Series User manual
MSI
MSI MS-CF05-SKU1 User manual
MSI
MSI MPG SEKIRA 500X User manual
MSI
MSI MS-9A95 WindBOX IV Advanced User manual
MSI
MSI MAG CORELIQUID M360 User manual
MSI
MSI P6N SLI Platinum series User manual
MSI
MSI MPG CORELIQUID K360 User manual
MSI
MSI CB11B User manual
MSI
MSI R5970 Series User manual
MSI
MSI msignage LS15 User manual
MSI
MSI MPG CORELIQUID K360 V2 User manual
MSI
MSI MEG PROSPECT 700RL User manual
MSI
MSI MS-9856 User manual
Popular Computer Hardware manuals by other brands
StarTech.com
StarTech.com 4PCIE-PCIE-ENCLOSURE quick start guide
AMX
AMX RDD-DM6/120 Schematic diagram
Data Translation
Data Translation DT3145 Getting started manual
Analog Devices
Analog Devices AD9284-250EBZ user guide
CRL Systems
CRL Systems SMP-900 Installation and operation manual
StarTech.com
StarTech.com PEX2MPEX instruction manual
Symbol
Symbol MR 100 user manual
ASRock Industrial
ASRock Industrial SBC-250 user manual
Viking Components
Viking Components DEC HiNote VP 700 Series installation guide
Koolance
Koolance Exos-2 user manual
Phanteks
Phanteks Founders Edition GTX Glacier G1080 Ti quick start guide
EK-Quantum
EK-Quantum Vector2 XC3 RTX 3080 D-RGB user guide