MSW TIGER MOTH 40 User manual

196351 5/19 | 85-001104_INST_A
TIGER MOTH 40 USB TAILLIGHT
6400 WEST 105TH STREET // BLOOMINGTON, MN 55438 // 1-855-883-6563 // WWW.MSWBIKE.COM
Thank you for your purchase! At MSW®we believe having essential
accessories makes a good bike ride great. Tiger Moth 40 is MSW’s handy
USB rechargeable taillight. Keep it on your bike mounted to the seat post,
or easily remove it for safe storage in a commuter backpack or bag. Be seen
on your rides!
WARNING: Cycling can be dangerous. Bicycle products should be
installed and serviced by a professional mechanic. Never modify your bicycle
or accessories. Read and follow all product instructions and warnings
including information on the manufacturer’s website. Inspect your bicycle
before every ride. Always wear a helmet. For more information, please visit
www.mswbike.com/safety
COMPATIBILITY AND INTENDED USE
WARNING: Ensure that the Tiger Moth 40 USB Taillight is placed
an adequate distance away from any rotating components of the bicycle
or bicycle wheels and is not obstructed by any components, accessories,
or cargo.
COMPONENTS
Light
Bracket
Pad
Ring
Cable tie x 2
USB cable
Hook-and-Loop strap
INSTALLATION
1. Install the light on the seat post, seat stay by using ring or cable tie.
2. When the light and bracket are horizontal, install the light on the bracket,
twist it 90° and fasten it.
TO SWITCH MODES
Press the button for 1.5 seconds to turn ON or OFF, and click to switch modes.
BATTERY LEVEL INDICATOR
Power OFF: Double click to show the remaining capacity.
Constant: 100–50%
Slow flash: 49–25%
Fast flash: 24–0%
LOW BATTERY ALERT
Less than 25% battery remaining
In constant mode: circular flashing
In flashing mode: pulsed constant lighting
CHARGING
1. Open the rubber cover at the bottom of the light.
2. Plug in provided Micro USB cable then plug into USB port. The light will
alert you when fully charged.
3. Indicator will show charging status by different mode.
Charging: constant lighting
Full charged: OFF
SPECIFICATIONS
Size: 25.5 × 25 × 55mm
Weight: 18g
40 Lumen LED: 42 chips COB LED
Battery: Rechargeable lithium-ion polymer
Charging: DC5V / 0.5A, 2 hours
Accessories: Micro USB cable
90°
Off
MODE MEMORY FUNCTION: When you turn the light on, it lights up in the last lighting
mode you used.
NOTE: Upon full discharge, the light will enter Protected Mode and automatically restore to
factory default settings. The light will be in Low Mode when charged and turned back on.
Low Beam
6 hrs
High Beam
1 hrs
Flashing 1
9 hrs
Flashing 2
13.5 hrs
Flashing 3
20 hrs
Flashing 4
3.5 hrs
Daytime
Flashing
8 hrs
Micro USB
Tighten strap tie
and cut excess
using scissors.
Press

196351 5/19 | 85-001104_INST_A
TIGER MOTH 40 USB TAILLIGHT
6400 WEST 105TH STREET // BLOOMINGTON, MN 55438 // 1-855-883-6563 // WWW.MSWBIKE.COM
ONGOING MAINTENANCE
Periodically make sure your light is securely mounted and in working order.
Inspect mounting brackets for damage.
LIMITED 2-YEAR WARRANTY
MSW warrants this new MSW product against defects in materials and
workmanship for two (2) years from the original date of retail purchase
by the consumer. This limited warranty is expressly limited to the repair or
replacement of the original product, at the option of MSW, and is the sole
remedy of the warranty. This limited warranty applies only to the original
purchaser of the MSW product and is not transferable.
In no event shall MSW be liable for any loss, inconvenience or damage,
whether direct, incidental or consequential or otherwise resulting from
breach of any express or implied warranty or condition of merchantability,
fitness for a particular purpose, or otherwise with respect to this product
except as set forth herein. This warranty gives the consumer specific legal
rights, and those rights and other rights may vary from state to state.
This warranty does not cover the following:
• Damage due to improper assembly or follow-up maintenance or lack
of skill, competence or experience of the end user
• Products that have been modified, neglected, used in competition
or for commercial purposes, misused or abused, involved in accidents
or anything other than normal use
• Damage or deterioration to the surface finish, aesthetics or appearance
of the product
• Normal wear and tear
• Labor required to remove and/or refit and re-adjust the product within
the bicycle assembly
• Installation of components, parts, or accessories not originally intended
for use with or compatible with MSW products.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE
EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES
OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
WARRANTY PROCESS
If you and your shop think your MSW product is worthy of a warranty
inspection, please return the product to the original place of purchase,
accompanied by a sales receipt.
For complete warranty information, visit www.mswbike.com/safety/warranty.