NANLITE Forza 60 II User manual

Guangdong NanGuang Photo&Video Systems Co., Ltd
USER MANUAL
Forza 60 $

1
Product Diagram
Forza 60 $
LED Spot Light
Technical Data
Rated power: 72W
Input Voltage/Current: DC15V/6A Max
AC100-240V 50/60Hz
Color Temperature: 5600K
CRI: 95
TLCI: 98

2
Product Details
1. Angle Fixing Knob 4. Lock Catch
2. L Shaped
Bracket
12. MODE
Button
3. Bracket Fixing Knob
5. Reflector
6. LCD Display
7. Left Knob
8. DC Power Socket
9. Power Switch
10. DMX In/Out
11. Right
Knob
13. USB Port

3
Detailed Description
1. Angle Fixing Knob: Allows for vertical adjustments and fixing of the light fixture.
2. L Shaped Bracket: Designed for connecting the light to the light stand and adjusting the direction of light.
3. Bracket Fixing Knob: For locking the light fixture and stand, and adjusting the horizontal direction of light.
4. Lock Catch: For installing and disassembling reflector and other accessories.
5. Reflector: For gathering light to improve the central illumination.
6. LCD Display: For displaying various function operations and data.
7. Left Knob: For adjusting the DIM and setting.
8. DC Power Socket: DC power input.
9. Power Switch: For switching on/off the fixture.
10. DMX In/Out: Connect to CB-DMX-3.5C-1/2 DMX adapter cable for DMX signal input and output
(Note: CB-DMX-3.5C-1/2 DMX adapter cable is sold separately).
11. Right Knob: For selecting various functions.
12. MODE Button: For switching between daylight/special effects/menu.
13. USB Port: For updating the firmware.

4
Usage
1. Installation of the Reflector
①When installing the reflector, ensure its mounting points align with the slots on the light fixture. When the
mounting points and slots are aligned push the reflector in place and rotate it in the direction shown on the
light until it click into place.
Note: This light is with FM mount, so please use accessories with FM mount, if the accessories with Bowens
mount are needed, pls mount after installing the Bowens mount adapter.
②When removing the reflector, push and hold the release button and rotate until the reflector is free to be
removed from the fixture.
Lock catch

5
2. Installation of Bowens Mount Adapter
①Adjust the L shaped bracket to the top position
before installation.
②When installing the adapter, ensure its mounting
points align with the slots on the light fixture, rotate
it according to the direction shown on the light until
the adapter is put into place.
③Mount the adapter on the light stand. ④Ensure the Bowens mount accessories align with
the slots of the Bowens mount adapter, rotate it
according to the direction shown on the adapter
until the accessories are put into place.

6
⑤When removing the accessory, push and hold the
release button and rotate according to the direction
shown on the adapter until the accessory is free to
be removed from the adapter.
1. Slide 2*NP-F battery onto
the battery holder
2. Mount the light onto the receiver
on the grip and lock.
3. Ensure the light is switched off,
connect DC plug into the DC
power socket.
⑥When removing the adapter, push and hold the
release button and rotate according to the direction
shown on the light until the adapter is free to be
removed from the light.
3. Installation of Battery Grip

7
1. Channel/DMX mode setting, including CH, DMX MODE, DMX REDUCED CH, DMX DIM CURVE and DMX
SMOOTHING setting.
①Channel Setting
Remote Control
·Forza 60 II supports DMX/RDM control, 2.4G remote control, and there is built-in bluetooth module.
▲ Address code need to be pre-set for DMX/RDM control and 2.4G remote control.
MODE
Rotate the "right knob" to CH.
Rotate the "left knob" to set the channel.
Press the MODE button to enter the menu.
MENU
CH: 512
BT: RESET
MENU
CH: 512
BT: RESET
MENU
BT: RESET
CH: 512
MENU
BT: RESET
CH: 512
MENU
BT: RESET
CH: 511

8
②DMX Mode Setting
MODE
Press the MODE button to enter the menu.
Rotate the right knob to DMX MODE.
Rotate the left knob to select desired DMX mode.
MENU
DMX REDUCED：ON
DMX MODE：ULTIMATE
MENU
BT: RESET
CH: 512
MENU
BT: RESET
CH: 512
MENU
DMX REDUCED：ON
DMX MODE：ULTIMATE
MENU
DMX REDUCED：ON
DMX MODE：DAYLIGHT

9
③DMX REDUCED CH
MODE
Press MODE button to enter the menu.
Rotate "right knob" to DMX REDUCED CH.
Rotate "left knob" to select ON or OFF.
MENU
BT: RESET
CH: 512
MENU
BT: RESET
CH: 512
MENU
DMX MODE：DAYLIGHT
DMX REDUCED：ON
MENU
DMX MODE：DAYLIGHT
DMX REDUCED：ON
MENU
DMX MODE：DAYLIGHT
DMX REDUCED：OFF

10
④DMX DIM CURVE
MODE
Press MODE button to enter the menu.
Rotate "right knob" to DMX DIM CURVE.
Rotate "left knob" to select the desired DMX dimming curve.
MENU
BT: RESET
CH: 512
MENU
BT: RESET
CH: 512
MENU
DMX SMOOTHING: OFF
DMX DIM: LINEAR
MENU
DMX SMOOTHING: OFF
DMX DIM: LINEAR
MENU
DMX SMOOTHING: OFF
DMX DIM: EXPONENT

11
⑤DMX SMOOTHING
MODE
Press MODE button to enter the menu.
Rotate "right knob" to DMX SMOOTHING.
Rotate "left knob" to select ON or OFF.
MENU
BT: RESET
CH: 512
MENU
BT: RESET
CH: 512
MENU
DMX DIM: LINEAR
DMX SMOOTHING: OFF
MENU
DMX DIM: LINEAR
DMX SMOOTHING: OFF
MENU
DMX DIM: LINEAR
DMX SMOOTHING: ON

12
2. DMX Control
①Connection between the light and DMX/RDM console with DMX connector cable as below:
NC
NC
NC
NC
GND 1
DATA- 2
DATA+ 3
②DMX Terminator
ln DMX control mode, the DMX output of the last fixture should be connected with a DMX terminator
(Not included). This prevents interference caused by DMX signals in the transmitting process. The terminator
is connected with a 120Ω(OHM) resistor across Pin 2 and Pin 3. (As shown below)
DMX Terminator Connection
Connect a 120Ω resistor across
Pin 2 and Pin 3 in an XLR plug
and insert into the DMX OUT
socket on the last unit.
PIN 2PIN 3
120Ω
1
2
3
5
4
DMX IN
1 GND
2 DATA-
3 DATA+
DMX OUT

13
③Set the channel of the fixture.
④Refer to the DMX reference guide and control the light via DMX/RDM console.
(For detailed operation please refer to the DMX/RDM console operation manual.)
Note: DMX reference guide " Forza_60_II_DMX_REFERENCE_GUIDE_EN " is downloadable from
www.nanlite.com.
3. RDM Control
①Connect the light fixture to the console with RDM function using a connection cable.
②Control the fixture via a console with RDM function, (For specific operation methods. please refer to the RDM
console operation manual.)Note: The UID format of the fixture is as follows:
Please scan the QR to check and download the latest DMX reference guide.
0008 XXXX XXXX
serial number
0208: Forza 60 II
Manufacturer: NANGUANG

14
MODE
Rotate the "right knob" to WIRELESS PROTOCOL.
Press the MODE button to enter the menu.
Rotate the "left knob" to select V1.0 or V2.0.
MENU
BT: RESET
CH: 512
MENU
BT: RESET
CH: 512
MENU
FAN: ON
WIRELESS PRO: V1.0
MENU
FAN: ON
WIRELESS PRO: V1.0
MENU
FAN: ON
WIRELESS PRO: V2.0
4. 2.4G and Bluetooth Remote Control
·Forza II 60 is able to be controlled by 2.4G remote controller, or by NANLINK APP via the WS-TB-1 transmitter box
or via Bluetooth directly.
Note: ①2.4G remote controller and WS-TB-1 transmitter box are sold separately.
②The fixture supports the 2.4G wireless protocol V1.0 and V2.0. Set fixture to V2.0 while using WS-RC-C1
or WS-RC-C2 remote controller. Set fixture to V1.0 while using other remote controllers.

15
1. Connection between fixture and power adapter.
①First ensure that the power switch of the fixture is in the "off " position. Now turn on the light, the LCD screen will
display all the relevant information for the fixture.
Operating Instructions
DAYLIGHT CH: 512
100%

16
②Daylight Mode Setting
Press the MODE button, switch to the daylight mode, rotate the "left knob" clockwise to increase the brightness
and rotate counterclockwise to decrease the brightness. The brightness percentage is displayed on the screen,
and the brightness adjustment range is from 000% to 100%.
Note: In daylight mode, press the "left knob" to turn off the light, and the DIM on the display screen is 000%.
Press again to restore its previous state, and press continuously to switch between on and off.
The maximum brightness is 30% when turn off the fan.
MODE
Rotate the "left knob" clockwise to increase the brightness.
Press the MODE button, enter the daylight mode.
Rotate the "right knob" counterclockwise to decrease the brightness.
MENU
LANGUAGE: ENG
CH: 512
DAYLIGHT CH: 512
099%
DAYLIGHT CH: 512
099%
DAYLIGHT CH: 512
100%
DAYLIGHT CH: 512
100%
DAYLIGHT CH: 512
099%

17
③FX setting:
There are a range of built-in effects for Forza 60 II including INT LOOP, FLASH, PULSE, STORM, TV,
PAPARAZZI, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION and WELDING.
MODE
Press the MODE button to switch to the special effect interface.
(1) INT LOOP
To set the INT Loop, rotate the "right knob" to select DIM and SPD (speed range: 02s to 30s), and then rotate
the "left knob" to set the corresponding parameters as required.
Rotate the "right knob" to select DIM and SPD.
Rotate the "left knob" to set the corresponding parameters as required.
DAYLIGHT CH: 512
100%
EFFECT CH: 512
DIM: 000% - 100%
FX: INT LOOP
EFFECT CH: 512
DIM: 000% - 100%
FX: INT LOOP
EFFECT CH: 512
FX: INT LOOP
DIM: 000% - 100%
EFFECT CH: 512
FX: INT LOOP
DIM: 000% - 100%
EFFECT CH: 512
FX: INT LOOP
DIM: 001% - 100%

18
(2) FLASH EFFECT
To set the flash effect, rotate the "right knob" to select DIM and INTVL (interval range: 0.1s to 10.0s).
Then rotate the "left knob" to set the corresponding parameters as required.
Rotate the "right knob" to select DIM and INTVL.
Rotate the "left knob" to set the corresponding parameters as required.
(3) PULSE
To set the pulse effect, roate the "right knob" to select DIM and P/MIN (P/MIN range: 001 to 240), then rotate
the "left knob" to set the corresponding parameters as required.
Rotate the "right knob" to select DIM and P/MIN.
EFFECT CH: 512
DIM: 100%
FX: FLASH
EFFECT CH: 512
FX: FLASH
DIM: 100%
EFFECT CH: 512
FX: FLASH
DIM: 100%
EFFECT CH: 512
FX: FLASH
DIM: 099%
EFFECT CH: 512
DIM: 100%
FX: PULSE
EFFECT CH: 512
FX: PULSE
DIM: 100%

19
(4) STORM
To set the storm effect, rotate the "right knob" to select DIM and INTVL (INTVL range: 01s to 60s), and
then rotate the "left knob" to set parameters as required.
Rotate the "right knob" to select DIM and INTVL.
Rotate the "left knob" to set parameters as required.
Rotate the "left knob" to set the corresponding parameters.
EFFECT CH: 512
FX: PULSE
DIM: 100%
EFFECT CH: 512
FX: PULSE
DIM: 099%
EFFECT CH: 512
DIM: 100%
FX: STORM
EFFECT CH: 512
FX: STORM
DIM: 100%
EFFECT CH: 512
FX: STORM
DIM: 100%
EFFECT CH: 512
FX: STORM
DIM: 099%