NANLITE Forza 60B II User manual

Guangdong NanGuang Photo&Video Systems Co., Ltd
USER MANUAL
Forza 60B $

1
Product Diagram
Technical Data
Forza 60B $
LED Bi-color Spot Light
Rated Power: 72W
Input voltage/current: DC 15V/6A Max
AC100-240V 50/60Hz
Color Temperature: 2700K-6500K
CRI: Average 96
TLCI: Average 98
Forza 60B $

2
Product Details
1. Angle Fixing Knob 4. Lock Catch
2. L Shaped
Bracket
12. MODE
Button
3. Bracket Fixing Knob
5. Reflector
6. Display
7. Left Knob
8. DC Power Socket
9. Power Switch
10. DMX In/Out
11. Right
Knob
13. USB Port

3
Detailed Description
1. Angle Fixing Knob: For adjusting and fixing the tilt direction of fixture.
2. L Shaped Bracket: Designed for connecting the light to the light stand and adjusting the direction of illumination.
3. Bracket Fixing Knob: For locking the light fixture on the stand, and for pan adjustment of fixture.
4. Lock Catch: To lock or release the reflector or other accessories.
5. Reflector: For concentrating light to improve the central illumination.
6. Display: For displaying various functions, operations and datas.
7. Left Knob: For adjusting the DIM and scrolling through different selections.
8. DC Power Socket: DC power input socket.
9. Power Switch: For switching on/off the fixture.
10. DMX In/Out: Connect to 1/2 DMX adapter cable for DMX signal input and output.
(Note: 1/2 DMX adapter cable is sold separately).
11. Right Knob: For selecting various functions.
12. MODE Button: For switching between CCT mode, EFFECT mode and MENU.
13. USB Port: For updating firmwares or connecting USB cable to external devices with maximum current of 5V/0.5A.

4
Usage
1. Installation and Detachment of Reflector
①When installing the reflector, align the reflector to the fixture's FM mount, rotate the reflector in the direction
shown on the fixture until it clicks into place.
Note: This light is with FM mount, so please use accessories with FM mount, if the accessories with Bowens
mount are needed, pls mount after installing the Bowens mount adapter.
②When removing the reflector, push and hold the lock catch and rotate until the reflector is free to be removed
from the fixture.
Lock catch

5
2. Installation and Detachment of Bowens Mount Adapter
①Adjust the L shaped bracket to the top position
before installation.
②When installing the adapter, ensure its mounting
points align with the slots on the light fixture, rotate
it according to the direction shown on the fixture until
the adapter is put into place.
③Mount the adapter on the light stand. ④Ensure the Bowens mount accessories align with
the slots of the Bowens mount adapter, rotate it
according to the direction shown on the adapter
until the accessories are put into place.

6
⑤When removing the accessory, push and hold the
release button and rotate according to the direction
shown on the adapter until the accessory is free to
be removed from the adapter.
①Slide 2*NP-F battery onto
the battery grip.
②Mount the light onto the receiver
on the grip and lock.
③Ensure the light is switched off,
connect DC plug into the DC
power socket.
⑥When removing the adapter, push and hold the
release button and rotate according to the direction
shown on the light until the adapter is free to be
removed from the light.
3. Installation of Battery Grip

7
1. CHANNEL and DMX Mode Setting, including CHANNEL, DMX MODE, DMX REDUCED CHANNELS,
DMX DIMMING CURVE and DMX SMOOTHING settings.
①CHANNEL Setting
Remote Control
·Forza 60B II supports 2.4G remote control, DMX/RDM control, and includes a built-in Bluetooth module as well.
▲ The channel needs to be set before operating the remote control via 2.4G and DMX/RDM.
MODE
Press the MODE button to enter the menu.
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 511
Rotate the “right knob” to CH.
Rotate the “left knob” to select the channel.

8
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
②DMX Mode Setting
③DMX REDUCED CHANNELS
MODE
Press the MODE button to enter the menu.
Rotate the “right knob” to DMX MODE.
Rotate the “left knob” to select CCT 8 bit or ULTIMATE.
MODE
Press the MODE button to enter the MENU.
MENU
BT: RESET
DMX MODE: ULTIMATE
MENU
BT: RESET
DMX MODE: CCT 8bit
MENU
BT: RESET
DMX MODE: ULTIMATE

9
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
Rotate the “left knob” to select ON or OFF.
Rotate the “right knob” to DMX REDUCED CHANNEL .
④DMX DIMMING CURVE
MODE
Press the MODE button to enter the MENU.
Rotate the “right knob” to DMX DIM CURVE.
MENU
DMX DIM: LINEAR
DMX REDUCED: OFF
MENU
DMX DIM: LINEAR
DMX REDUCED: OFF
MENU
DMX DIM: LINEAR
DMX REDUCED: ON
MENU
DMX REDUCED: OFF
DMX DIM: LINEAR

10
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
Rotate the “left knob” to select LINEAR, EXPONENT, LOGARITHM, S CURVE or GAMMA 2.2.
⑤DMX SMOOTHING
Rotate the “left knob” to select ON or OFF.
MODE
Press the MODE button to enter the MENU.
Rotate the “right knob” to DMX SMOOTHING.
MENU
DMX REDUCED: OFF
DMX DIM: LINEAR
MENU
DMX REDUCED: OFF
DMX DIM: EXPONENT
MENU
WIRELESS PR : V1.0
DMX SMOOTHING: OFF
MENU
WIRELESS PR : V1.0
DMX SMOOTHING: OFF
MENU
WIRELESS PR : V1.0
DMX SMOOTHING: ON

11
2. DMX Control
①Connect the fixture to the DMX/RDM consoles via DMX cable as shown below:
NC
NC
NC
NC
DMX IN DMX OUT
DATA- 2
GND 1
DATA+ 3
2 DATA-
1 GND
3 DATA+
②DMX Terminator
ln DMX control mode, the DMX output of the last light fixture should be connected with a DMX terminator
(not included). The terminator is connected with a 120Ω(OHM) resistor across Pin 2 and Pin 3 (As shown below).
This prevents interference caused by DMX signals in the transmitting process.
DMX Terminator Connection
Connect a 120Ω(OHM) resistor
across Pin 2 and Pin 3 in an XLR
plug and insert into the DMX
OUT socket on the last unit.
120Ω
1
2
3
5
4
PIN 2 PIN 3

12
③Address Setting of the Light Fixtutre.
④Refer to the DMX reference guide and control the light via DMX/RDM console. (For detailed operation please
refer to the DMX/RDM console operation manual.)
Note: DMX reference guide "Forza_60B II_REFERENCE_GUIDE_EN" is downloadable from www.nanlite.com.
Please scan the QR to check and download the latest DMX reference guide.
3. RDM Control
①Connect the light fixture to the console with RDM function by using a connection cable, the connection method is
the same as that with a DMX/RDM console.
②Control the fixture via a console with RDM function. (For specific operation methods, please refer to the RDM
console operation manual.) Note: The UID format of the fixture is as follows:
0008 XXXX XXXX
Serial number
0209：Forza 60B II
Manufacturer: Nanguang

13
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MODE
Press MODE button to enter the menu.
4. 2.4G Remote Control
·Forza 60B II can be remotely controlled by 2.4G remote controller and by NANLINK APP via Bluetooth directly
or via the WS-TB-1 transmitter box.
Note: ①2.4G remote controller and WS-TB-1 transmitter box are sold separately.
②The fixture supports the 2.4G wireless protocol V1.0 and V2.0. The fixture should be set in V2.0 while
using WS-RC-C1 or WS-RC-C2 remote controller, set in V1.0 while using other remote controllers.
Rotate the “right knob” to WIRELESS PROTOCOL.
Rotate the “left knob” to select V1.0 or V2.0.
MENU
DMX SMOOTHING: OFF
WIRELESS PR : V1.0
MENU
DMX SMOOTHING: OFF
WIRELESS PR : V1.0
MENU
DMX SMOOTHING: OFF
WIRELESS PR : V2.0

14
1. Connection between fixture and power adapter.
①First ensure that the power switch is off. Now turn on the light, the screen will display all the relevant information
for the fixture.
Operating Instructions
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP

15
2. CCT Mode setting
Press MODE button to CCT mode, Rotate the “left knob” to adjust the DIM (DIM range: 000%…100%),
rotate "right Knob" to adjust the color temperature (CCT range: 2700K…6500K)
MODE
CCT CH: 512
000% 6500K
Rotate the “left knob” to adjust the DIM.
Press MODE button to CCT mode.
0%
.
.
.
100%
CCT CH: 512
100% 6500K
CCT CH: 512
000% 6500K
CCT CH: 512
000% 2700K
2700K
.
.
.
6500K
CCT CH: 512
100% 6500K
Roate "right Knob" to adjust the color temperature.

16
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
3. EFFECT Mode setting
Press MODE button to EFFECT mode. The Forza 60B II has built-in effects including CCT LOOP, INT LOOP,
FLASH, PULSE, STORM, TV, PAPARAZZI, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION and WELDING.
MODE
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
FX: CCT LOOP
DIM: 100%
Press MODE button to EFFECT mode.
Note: ①In effect mode, DIM range is the same as the CCT MODE.
②In effect mode, the color temperature is not synchronized with the color temperature in CCT mode, and
the CCT adjustment range is the same as that of in the CCT mode.
③When the fixture function is unlocked, in any mode, press the "left knob" to turn off the fixture, and the
brightness percentage on the screen will be 000%. Press again to restore the fixture to its previous state.
Press continuously to switch the fixture betweeen on and off.
Rotate the “right knob” to FX.
Rotate the “left knob” to select the desired effect.
CCT LOOP
.
.
.
WELDING

17
EFFECT CH: 512
FX: CCT LOOP
DIM: 099%
EFFECT CH: 512
FX: CCT LOOP
DIM: 100%
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 000%-100%
FX: INT LOOP
EFFECT CH: 512
FX: INT LOOP
DIM: 000%-100%
Rotate the “right knob” to select from DIM, CCT and SPD.
①CCT LOOP
CCT LOOP setting: Rotate the “right knob” to select from DIM, CCT and SPD (Range: 02S…30S),
then rotate the “left knob” to set the parameters.
Rotate the “right knob” to select from DIM, CCT and SPD.
Rotate the “left knob” to set the parameters.
②INT LOOP
INT LOOP setting: Rotate the “right knob” to select from DIM, CCT and SPD (Range: 02S…30S),
then rotate the “left knob” to set the parameters.
EFFECT CH: 512
FX: CCT LOOP
DIM: 100%

18
EFFECT CH: 512
FX: INT LOOP
DIM: 000%-100%
EFFECT CH: 512
FX: INT LOOP
DIM: 001%-100%
Rotate the “left knob” to set the parameters.
③FLASH
FLASH setting: Rotate the “right knob” to select from DIM, CCT and INTVL (INTVL: 0.1S…10S),
then rotate the “left knob” to set the parameters.
Rotate the “right knob” to select from DIM, CCT and INTERVALS.
Rotate the “left knob” to set the parameters.
EFFECT CH: 512
FX: CCT LOOP
DIM: 099%
EFFECT CH: 512
FX: FLASH
DIM: 100%
EFFECT CH: 512
DIM: 100%
FX: FLASH
EFFECT CH: 512
FX: CCT LOOP
DIM: 100%

19
④PULSE
PULSE setting: Rotate the “right knob” to select from DIM, CCT and PULSES/MIN (Range: 001…240),
then rotate the “left knob” to set the parameters.
Rotate the “right knob” to select from DIM, CCT and PULSES/MIN.
⑤STORM
STORM setting: Rotate the “right knob” to select from DIM, CCT and INTVL (Range: 1s ... 60s) ,
then rotate the “left knob” to set the parameters.
Rotate the “right knob” to select from DIM, CCT and INTVL.
Rotate the “left knob” to set the parameters.
EFFECT CH: 512
FX: FULSE
DIM: 100%
EFFECT CH: 512
DIM: 100%
FX: FULSE
EFFECT CH: 512
FX: FULSE
DIM: 099%
EFFECT CH: 512
FX: FULSE
DIM: 100%
EFFECT CH: 512
FX: STORM
DIM: 100%
EFFECT CH: 512
DIM: 100%
FX: STORM