NANLITE PavoTube T8-7X User manual

Guangdong NanGuang Photo&Video Systems Co., Ltd.
USER MANUAL
PavoTube T8-7X

1
Product Diagram
PavoTube T8-7X
RGBWW LED Pixel Tube Light
Rated Power: 8W
Input: DC5V/2A
Color Temperature: 2700K-7500K
CRI: Average 96
TLCI: Average 97
Technical Data
PavoTube T8-7X MADEIN CHINA
Batterycapacity: 3.7V/4400mAh
RatedInput: 5V/2A
ta=45℃

2
DIM CCT/HUE
Reset
8. CCT/HUE Button
7. 1/4"-20 Mount Receiver
2. Button
3. DIM Button
5. USB Type-C Port
4. Reset Button
6. LED Indicator
Product Details
Detailed Description
1. Handle: To hold the fixture.
2. Button: Long press the button to turn the fixture on/off, short press the button to switch between CCT and HSI
modes.
3. DIM Button: Short press DIM button to adjust the intensity in fixed intervals.
4. Reset Button: Press the reset button to turn off the fixtute when the function is stuck. Long press the button to
restart the fixture if needed.
5. USB Type-C Port: For power input or firmware updates. And for DMX signal input and output when connected with
USB-C to DMX cable splitter. (Note: The USB-C to DMX cable splitter is sold separately.)
1. Handle

3
DIM CCT/HUE
Reset
6. LED Indicator: To signify the state of power input. The indicator will flash when the fixture is charging; the
indicator is on when the fixture is fully charged. When the fixture is being used, the indicator will also light up.
7. 1/4"-20 Mount Receiver: To install accessories with a 1/4"-20 mount.
8. CCT/HUE Button: Short press to adjust the CCT/HUE in fixed intervals.
Usage
1. Connection between the Light Fixture and Power Outlet
①Connecting the fixture with USB cable and USB adapter with output of 5V/2A or above.
(Note: USB adapter is not included.)
②The built-in battery will supply power once the fixture is charged.

4
DIM CCT/HUE
Reset
2. Connection between the Light Fixture and WC-USBC-C1 Wire Controller
The fixture can be controlled by the wire controller in CCT mode, HSI mode, EFFECT mode, PIXEL FX mode,
CHANNEL setting, LANGUAGE, DMX mode, DMX PIXEL, WIRELESS PROTOCOL, BLUETOOTH RESET,
FIRMWARE UPDATE and VERSION checking (please refer to wire controller user manual for detailed instructions).
(Note: Wire controller is sold separately.)
MODE SWITCH

5
Remote Control and Control Method by Wire Controller
·PavoTube T8-7X supports DMX and wire controller control, and includes a built-in Bluetooth module as well.
▲The channel needs to be set before operating remote control via DMX.
1. Channel and DMX setting, including CHANNEL, DMX MODE, DMX REDUCED CHANNELS, DMX DIMMING CURVE
and DMX SMOOTHING.
The channel of the fixture can be set by connecting DMX/RDM console, wire controller or by APP via the transmitter
box. The DMX setting can be made via connecting the wire controller. (For specific operations, please refer to the
relevant manuals.)
2. DMX Remote Control
①Connect the fixture to the DMX/RDM console with a DMX adapter cable.
The connection between the fixture and DMX adapter cable is as follows:
·A DMX adapter cable must be used for the connection between light fixture and DMX/RDM console, or between
light fixture and light fixture.(DMX adapter cable is not included.)
XLR plug/socket and the wire should be connected as shown above.
·Pin1, Pin2, Pin3 for connecting DMX signal. Pin4, Pin5 has no connection.
▲NOTE: When connecting DMX, make sure the internal pin is not in contact with the inner case. The fixture can
match the DMX512 (1990) control signal.
DMX IN DMX OUT
1 GND
2 DATA-
3 DATA+
NC
NC
NC
NC
GND 1
DATA- 2
DATA+ 3

6
②DMX Terminator
ln DMX control mode, the DMX output of the last fixture should be connected with a DMX terminator
(Not included). This prevents interference caused by DMX signals in the transmitting process. The terminator is
connected with a 120Ω(OHM) resistor across Pin 2 and Pin 3. (As shown below)
DMX Terminator Connection
Connect a 120Ω(OHM) resistor
across Pin 2 and Pin 3 in an XLR
plug and insert into the
DMX OUT socket on the last unit.
PIN 2PIN
120Ω
1
2
3
5
4
Please scan the QR code to check or download the latest DMX reference guide.
③Set the channel of the fixture.
④Refer to the DMX reference guide and control the light via DMX/RDM console.
(For detailed operation please refer to the DMX/RDM console operation manual.)
Note: DMX reference guide "PavoTube_T8-7X_DMX_REFERENCE_GUIDE_EN " is downloadable from
www.nanlite.com.

7
Safety Precautions
1. Please check for possible damage caused in transit after opening the package. Please do not use if damage is
found. And contact with the distributor or manufacturer as soon as possible.
2. Please do not use a power cable with damaged insulation. Please do not unplug too hard or drag the power cable
directly.
3. Please make sure the voltage of power supply accords with the voltage specified on the fixture before installation.
4. Please turn the fixture off when it is not in use or before cleaning.
5. Please keep the fixture safely stored and away from children.
Operating Instructions
1. Long press button to turn on the fixture.
2. DIM button: Short press DIM button to adjust the intensity in certain intervals of 0%, 20%, 40%, 60%, 80%, 100%.
When at 100%, press the DIM button, the intensity will reset at 0%.
3. button: Short press the button to switch modes between CCT and HSI.
4. CCT/HUE button: Short press CCT/HUE to adjust CCT or HUE settings in certain intervals. When reaching to
maximum value, it will return to minimum value upon pressing the button again. (When the HUE is adjusted
to 360, press the button again it will return to 30.)
CCT: 2700K, 3200K, 4300K, 5600K, 6500K, 7500K.
HUE: 0, 30, 60, 90, 120, 150, 180, 210, 240, 270, 300, 330, 360.
5. Bluetooth Reset: Long press the three buttons at the same time until the fixture has bule twinkle for 3 seconds and
reset completes.
6. Long press to turn off the fixture.

8
Notice
1. Please do not look directly at the emitter when the fixture is on.
2. Please do not place any object on the fixture or allow liquid to flow inside the fixture.
3. Please do not place the fixture near any flammable or volatile substances like alcohol or gasoline.
4. Please do not use strong detergent for cleaning. Please wipe off the dirt by using a cloth with neutral cleanser
when cleaning the fixture.
5. Please set up the fixture in a dry and well-ventilated place. Please do not use it in any humid, dusty or overheated
environment.
6. Please do not disassemble the fixture at will to repair by yourself. Qualified professionals should conduct
maintenance under the condition of strictly following the operating procedures described in this manual.
What’s in the box? Please kindly check.
PavoTube T8-7X×1 USB Type-C Cable×1 User Manual×1
PavoTube T8-7X
PavoTube T8-7X MADEINCHINA
Batterycapacity:3.7V/4400mAh
RatedInput:5V/2A
ta=45℃
Guangdong NanGuang Photo&Video Systems Co., Ltd.
USER MANUAL
PavoTube T8-7X

9
USB Type-C Cable×2
PavoTube T8-7X×2
Carrying Bag×1
PavoTube T8-7X 2KIT
User Manual×1
PavoTube T8-7X MADEINCHINA
Batterycapacity:3.7V/4400mAh
RatedInput:5V/2A
ta=45℃
Guangdong NanGuang Photo&Video Systems Co., Ltd.
USER MANUAL
PavoTube T8-7X

USB Type-C Cable×4
PavoTube T8-7X×4
Carrying Bag×1
PavoTube T8-7X 4KIT
This manual has been compiled according to the rigorous testing for Nanlite products. Product designs are subject
to change without prior notice. The latest version of the manual for this product is downloadable at www.nanlite.com.
General Fault Detection and Diagnosis
Please check whether the connection between the cable and power
adapter or fixture are loose.
The fixture won't boot up properly.
Diagnosis
Fault Detection
User Manual×1
PavoTube T8-7X MADEINCHINA
Batterycapacity:3.7V/4400mAh
RatedInput:5V/2A
ta=45℃
Guangdong NanGuang Photo&Video Systems Co., Ltd.
USER MANUAL
PavoTube T8-7X
10

[phone] [phone] [e-mail]
Dongli Section, Highway 324, Chenghai, Shantou City, Guangdong Province, China
Version: V5 2023-01-13
www.nanlite.com