4 | USER MANUAL
EN
Device functions
Video Connect the device to an external power supply and it will start recording automatically (indicated by
the ashing blue light). Press the OK button to stop recording (the blue light will become steady). Press
OK again to record another video. Each video will be saved automatically.
Photo In Video Record mode, press the Menu button to enter Capture mode, press the OK button to take a
photo (it will be saved automatically).
Playback In Video Record mode, press the Menu button twice to enter Playback mode; press the Up and Down
buttons to select a le; press the OK button to play a le. During playback, press OK to pause/unpause;
press the Up and Down keys to fast forward/rewind.
Lock le In Video Record mode, press Power to protect the current recording. A key symbol will appear at the
bottom of the screen. In Playback mode, select a le, press Menu and select Protect, then Lock Current
or Lock All. Protected les cannot be deleted or overwritten. Select Unlock Current/Unlock All to remove
protection.
Sound Record Choose this option to record video with or without sound.
Loop recording This setting allows saving the recording in separate les every few minutes. For example, if set to 5
minutes, 1 hour of footage will be saved as 12 ve minute fragments. If the memory card is full, all
unprotected les will be overwritten in the order they were created.
G-sensor If this fuction is on, when vehicle is hit by something, the DVR will automatically lock the current video.
Parking monitor In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The
le will be protected (locked). If nothing happens for over a minute, the device will shut down.
