NEC Express5800/120Ri-2 User manual

NEC Express5800 /
120Ri-2
The NEC Express5800/120Ri-2 supports up to two Quad-
Core Intel®Xeon®5300 series processors or up to two
Dual-Core Intel®Xeon®5100 series processors. Powered by
the multi-core Intel®Xeon®processors that enable data-
intensive processing, the 120Ri-2 delivers improved application
performance while achieving energy-efficient operation within
the same physical space.
Delivering up to 48GB (4GB x12) of memory capacity, the
120Ri-2 employs DDR2-667 Fully-Buffered DIMM memory
with ECC, ChipkillTM, mirroring, and on-line sparing
capabilities.
To provide high-performance internal storage, the 120Ri-2
supports Serial Attached SCSI (SAS), with a maximum
capacity of 1.8TB (300GB x6), and enables RAID 0 and 1 as
standard and RAID 5 as option.
In addition to the Low Profile PCI slots (one PCI EXPRESSTM x8
slot and two x4 slots), the 120Ri-2 supports a wide variety of
option boards to further customize the slot mix and to meet
particular needs.By replacing the standard riser card (one PCI
EXPRESSTM x8 slot and two 64bit/100MHz PCI-X slots, Full
Height) with an optional riser card*, one of the following slot
options becomes available:
- Two 64bit/133MHz PCI-X slots and one 64bit/100MHz PCI-X
slot
- Three 64bit/33MHz PCI (5V) slots
* Two different optional riser cards are available for 120Ri-2.
To ensure continuous system operation, hot-swap redundant
power supplies and fans are supported as option.
To enhance RAS (Reliability, Availability and Serviceability)
functionality, the 120Ri-2 comes standard with the
EXPRESSSCOPE Engine.This feature allows the user to
monitor the status of a managed server and operate its KVM
(Keyboard, Video, and Mouse) devices from a remote console
via LAN.
Bundled for easy system management, NEC ESMPRO
monitors and controls system operation from the remote
console, and assists the administrator in troubleshooting the
system.For simple system installation, NEC EXPRESSBUILDER
is attached as an installation support tool.
Product Highlights
www.necam.com/servers
■ Delivers utmost performance for
medium to large businesses, along with
high expandability, reliability, and
availability in a space-saving 2U rack
form factor
■ Supports Multi-Core Intel
®
Xeon
®
processors for powerful processing
■ EXPRESSSCOPE Engine provides
enhanced RAS functionality while
optimizing your management cost

NEC Express5800 /
120Ri-2
Hardware Specification
www.necam.com/servers
• Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
• Intel and Intel Xeon are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
• Linux is a trademark of Linus Torvalds.
• Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
• All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders.
• Specifications are subject to change without notice.
Cat.No. E07BS4
NEC EXPRESS5800
For further information, please contact:
External Interface
Dimensions (mm)
Weight
Support OS
*6
Power Supply
Cooling Fan
1[1]
6[6]
Total: 6 slots
Full Height:
Standard : PCI EXPRESSTM x8 : 1
64bit/100MHz PCI-X: 2
Option 1
*2
: 64bit/133MHz PCI-X: 2
64bit/100MHz PCI-X: 1
Option 2
*3
: 64bit/33MHz PCI (5V): 3
Low Profile
Standard : PCI EXPRESSTM x8: 1
PCI EXPRESSTM x4: 2
Display x1, Keyboard / Mouse x1
*4
USB2.0 x4, Serial x2
LAN x2, Management LAN x1
445W x 722D x 88H
*5
, 2U rack
21kg (standard), 31kg (max)
Windows Server™2003,
Standard Edition
*6 *7
/ Enterprise Edition
*7
Windows Server™ 2003 R2,
Standard Edition
*6
/ Enterprise Edition
Windows Server™ 2003 R2,
Standard x64 Edition / Enterprise x 64 Edition
Red Hat
®
Linux™
*9
900VA/890W
Standard: 1, Not redundant
Option :Up to 2, redundant, hot-swap
Standard: Not redundant
Option : Redundant, hot-swap
Device Bays [Free]
Disk Drive Bays [Free]
Expansion Slots
Graphics
Maximum
Power Consumption
Server Management Controller
integrated (2MB)
Option: ATI ES1000 (16MB)
Quad-Core Intel®Xeon®Processor
X5355
(2.66GHz/1333MHz FSB/2x4MB L2 Cache)
E5345 (2.33GHz/1333MHz FSB/2x4MB L2 Cache)
Dual-Core Intel®Xeon®Processor
5160
(3GHz/1333MHz FSB/4MB L2 Cache)
5140 (2.33GHz/1333MHz FSB/4MB L2 Cache)
5130 (2GHz/1333MHz FSB/4MB L2 Cache)
5110 (1.60GHz/1066MHz FSB/4MB L2 Cache)
Supported
Intel®5000P
1-2
2GB (1GB x2)
48GB (4GB x12)
(when standard DIMMs are removed.)
CD-RW/DVD combo drive
*10
1000BASE-T x2
(100BASE-TX and 10BASE-T are supported.)
Intel®64
Chipset
CPU
No. of CPU
ODD
Network
Standard
Max
Max
I/F
Memory
Internal
HDD
DDR2-667 FB-DIMM
ECC, Chipkill, mirroring, on-line sparing
Serial Attached SCSI
Supported
1.8TB (300GB x6)
On-board RAID 0, 1
RAID 5 (option)
*1
Hot-Plug
RAID
*8
*1
Requires an optional Disk Array Controller (SAS) [N8103-91, -99, or -105].
*2
Requires an optional Riser Card (PCI-X) [N8116-07].
*3
Requires an optional Riser Card (5V) [N8116-08].
*4
Use a Y-cable provided with the system.
*5
The front bezel and protruding objects are not included.
When included: 485W x 822D x 88H
*6
Supports up to 4GB memory.
*7
SP1 or later.
*8
Contact your local NEC sales company for RAID configurations on Linux.
*9
Go to "NEC Express5800 on Linux" at:
http://www.nec.co.jp/express/linux/index.html
*10
Writing software is not provided for this combo drive.