NEC Univerge SV8100 User guide

Notice
Note that when converting this document from its original format to a
.pdf file, some minor font and format changes may occur. When
viewing and printing this document, we cannot guarantee that your
specific PC or printer will support all of the fonts or graphics.
Therefore, when you view the document, fonts may be substituted and
your individual printer may not have the capability to print the
document correctly.

System Hardware Manual
INT-2088
Issue 2.0
(Version 4000)
®

NEC Corporation of America reserves the right to change the specifications,
functions, or features at any time without notice.
NEC Corporation of America has prepared this document for use by its
employees and customers. The information contained herein is the property of
NEC Corporation of America and shall not be reproduced without prior written
approval of NEC Corporation of America.
Dterm, NEAX and UNIVERGE are registered trademarks of NEC Corporation and
Electra Elite is a registered trademark of NEC America, Inc. Windows is a
registered trademark of Microsoft Corporation. AT&T, the AT&T logo and all other
AT&T marks are trademarks of AT&T Intellectual Property and/or AT&T affiliated
companies. Pentium is a trademark or registered trademark of Intel Corporation or
its subsidiaries in the United States and other countries. Bluetooth is a registered
trademark owned by Bluetooth SIG Inc. and is licensed to NEC Corporation of
America. All other brand names and product names referenced in this document
are trademarks or registered trademarks of their respective companies.
Copyright 2010
NEC Corporation of America
6535 N. State Highway 161
Irving, TX 75039-2402
Communications Technology Group

___________________________________________________________________________________
Preface
GENERAL
INFORMATION Congratulations! You have purchased the NEC UNIVERGE SV8100 System.
The feature-rich UNIVERGE SV8100 key system provides over 200 features
including Computer Telephony Integration, Least Cost Routing, Automatic Call
Distribution, T1, ISDN-BRI Voice Trunks, ISDN-PRI Voice Trunks, Voice over Internet
Protocol, and many others.
The UNIVERGE SV8100 system provides what the customer needs today, and as
business expands the system can be expanded to grow as well.
The UNIVERGE SV8100 system has a set of manuals that provides all the
information necessary to install and support the system. This preface describes these
manuals.
THIS MANUAL This manual contains detailed instructions to install the UNIVERGE SV8100 chassis,
Blades, Multiline Terminals, and optional equipment in the following chapters.
Regulatory
This chapter provides important regulatory information.
Chapter 1 – Introduction to SV8100
This chapter provides an overview of the UNIVERGE SV8100 system.
Chapter 2 – SV8100 System Specifications
This chapter contains detailed specifications for the SV8100 system and should be
carefully reviewed by the technician before installing the system.
Chapter 3 – Installing the SV8100 Chassis
This chapter contains the information necessary for installing the SV8100 chassis.
The technician should become familiar with this section before starting installation.
Chapter 4 – Installing the SV8100 Blades
This chapter contains instructions for installing the blades in the UNIVERGE SV8100
chassis.

Chapter 5 – Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline
Terminals
This chapter provides information about the UNIVERGE SV8100 system digital and
IP terminals in addition to the single line telephones, cordless telephones and
wireless telephones.
Chapter 6 – Installing SV8100 Cordless Telephones
This chapter provides information regarding cordless telephones that can be used in
conjunction with the UNIVERGE SV8100 system.
Chapter 7 – Installing SV8100 Wireless Telephones
The wireless telephones provide wireless freedom that also allows access to features
provided by the UNIVERGE SV8100 system.
Chapter 8 – Installing SV8100 Conference Solutions
Conferencing solutions provide premium, full-duplex audio to small conference rooms
as a single unit or to larger rooms when expanded by up to three units that also
expand microphone access and loudspeaker coverage.
Chapter 9 – Installing SV8100 Optional Equipment
This chapter provides information for installing optional equipment, such as
PGD(2)-U10 ADPs, background music, door boxes, DSS consoles, Dterm VSR,
external paging as well as other handsets, recording devices and adapters on the
UNIVERGE SV8100 digital and IP telephones.
Chapter 10 – Installing Dterm Series i Telephones
The UNIVERGE SV8100 system supports several different Electra Elite IPK II Dterm
Series i Multiline Terminals and an Attendant Console. This chapter describes each
terminal and the console and provides instructions for attaching the terminals to the
system and for wall mounting.
Chapter 11 – Installing Dterm Series i Optional Equipment
The UNIVERGE SV8100 system provides several adapters that allow peripheral
equipment to be attached to the IPK II Dterm Series i Multiline Terminals. This chapter
describes each adapter and provides applicable installation instructions.

SUPPORTING
DOCUMENTS Other manuals in the set are described below.
Documents supporting the SV8100 system include:
UNIVERGE SV8100 Features and Specifications Manual
This manual describes each available feature for the SV8100 system.
UNIVERGE SV8100 General Description Manual
This manual contains general information about the system features, configuration
and standards. This overview of the SV8100 system is useful when presenting
information to potential customers.
UNIVERGE SV8100 Programming Manual
This manual contains all programming instructions for the SV8100 system.
UNIVERGE SV8100 PC Programming Manual
This manual describes the operation of the PCPro program for the SV8100 system.
This program is a user-friendly Windows application that allows the user to program
and configure features of the SV8100 system from the PC environment.

THIS PAGE INTENTIONALLY LEFT BLANK

System Hardware Manual i
___________________________________________________________________________________
___________________________________________________________________________________
TABLE OF CONTENTS
Regulatory
Chapter 1 Introduction to SV8100
Section 1 General Information .................................................................... 1-1
Section 2 Equipment List............................................................................. 1-5
Chapter 2 SV8100 System Specifications
Section 1 General Information .................................................................... 2-1
Section 2 System Block Diagram................................................................ 2-1
Section 3 Maximum System Capacities ..................................................... 2-5
3.1 Trunk/Port/Channel Capacities.....................................................2-5
3.2 System Chassis Capacities........................................................2-11
3.3 Blade Capacities.........................................................................2-13
Section 4 Licensing.................................................................................... 2-19
Section 5 Power-Based Calculator Chart................................................. 2-23
Section 6 System Requirements and Specifications.............................. 2-26
6.1 Cabling........................................................................................2-26
6.2 Power Requirements..................................................................2-29
6.2.1 Power Supply Specifications.....................................................2-29
6.2.2 Power Supply Consumption......................................................2-30

Issue 2.0 UNIVERGE SV8100
___________________________________________________________________________________
ii Table of Contents
___________________________________________________________________________________
6.3 Environmental Conditions...........................................................2-30
6.3.1 Temperature and Humidity........................................................2-30
6.4 Outside Line Types.....................................................................2-31
6.5 Transmission, Network, and Control Specifications....................2-32
6.5.1 Transmission.............................................................................2-32
6.5.2 Network.....................................................................................2-32
6.5.3 Control.......................................................................................2-32
6.5.4 Electra Elite IPK Terminals and Equipment..............................2-33
6.5.5 Series i Terminals .....................................................................2-33
6.6 Dialing Specifications..................................................................2-34
6.6.1 Dial Pulse Address Signaling....................................................2-34
6.6.2 Dual-Tone Multifrequency (DTMF) Address Signaling..............2-34
6.6.3 External Equipment Connection................................................2-35
6.6.4 Music Source for Music on Hold via Chassis............................2-35
6.6.5 Music Source for Station Background Music via ACI................2-35
6.6.6 External Paging (Audio)............................................................2-35
6.6.7 External Tone Ringer/Night Chime Output................................2-36
6.6.8 SMDR Output............................................................................2-36
6.6.9 PC Connection..........................................................................2-36
6.6.10 Relay Contact............................................................................2-36
6.7 Battery Backup............................................................................2-36
6.7.1 System Backup (Optional) ........................................................2-36
6.7.2 Memory Backup........................................................................2-36
6.8 Weights and Dimensions............................................................2-37
6.8.1 Tone Patterns............................................................................2-41
6.8.2 Multiline Terminal LED Flash Patterns......................................2-41

UNIVERGE SV8100 Issue 2.0
System Hardware Manual - iii
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual iii
___________________________________________________________________________________
Section 7 Traffic Capacity.......................................................................... 2-44
Chapter 3 Installing the SV8100 Chassis
Section 1 General Information .................................................................... 3-1
Section 2 Site Preparation and MDF/IDF Construction............................. 3-1
2.1 Precautionary Information.............................................................3-1
2.2 Surveying the Customer Site........................................................3-2
2.3 Selecting the Best Location for Proper Installation.......................3-2
2.3.1 Selecting the Chassis Installation Site........................................3-2
2.3.2 Selecting a Permanent MDF Location........................................3-3
2.3.3 Selecting a Site for Installing the Telephones.............................3-3
2.4 Constructing the Main Distribution Frame (MDF).........................3-3
2.5 Power Failure Transfer.................................................................3-4
2.6 Fax CO Branch Connection..........................................................3-5
Section 3 Installing the Chassis.................................................................. 3-5
3.1 Unpacking the Equipment.............................................................3-5
3.2 Before Installation.........................................................................3-6
3.3 Installing the 19” (CHS2U-US) Chassis........................................3-6
3.3.1 Installing the 19” Controlling Chassis..........................................3-7
3.3.2 Installing Expansion Blades in the 19” Chassis (Optional) .........3-9
3.3.2.1 Connector Pin-Out on the PZ-BS10/PZ-BS11.....................3-10
3.3.2.2 Install the PZ-BS10 Expansion Base Blade in
the CHS2U-US Controlling Chassis ....................................3-10
3.3.2.3 Install the PZ-BS11 Expansion Blade in the
CHS2U-US Expansion Chassis...........................................3-13
3.3.2.4 Connect the Controlling and Expansion Chassis ................3-17
3.3.3 Install Grounding on 19” Chassis..............................................3-18

Issue 2.0 UNIVERGE SV8100
___________________________________________________________________________________
iv Table of Contents
___________________________________________________________________________________
3.3.4 Install Grounding on Multiple 19” Chassis (Optional)................3-19
3.3.5 Install AC Power Cords on 19” Chassis....................................3-20
3.3.6 Install AC Power Cords on Multiple 19” Chassis (Optional)......3-21
3.3.7 Install Additional Blades 19” Chassis........................................3-21
3.3.8 Apply Power to the 19” Chassis................................................3-21
3.4 Installing the 9.5” Gateway (CHS2U GW-US) and Base
(CHS2U B-US) Chassis..............................................................3-22
3.4.1 Install Grounding on 9.5” Gateway or Base Chassis ................3-23
3.4.2 Install AC Power Cord 9.5” Gateway or Base Chassis.............3-23
3.4.3 Install Additional Blades 9.5” Gateway or Base Chassis ..........3-23
3.4.4 Apply Power to the 9.5” Gateway or Base Chassis ..................3-23
3.5 Installing the 9.5” Base (CHS2U B-US) and Expansion
(CHS2U E) Chassis....................................................................3-24
3.5.1 Connecting the 9.5” Base and Expansion Chassis...................3-25
3.5.2 Installing Expansion Blades in the 9.5” Base and
Expansion Chassis (Optional)...................................................3-29
3.5.2.1 Connector Pin-Out on the PZ-BS10/PZ-BS11.................... 3-30
3.5.2.2 Install the PZ-BS10 Expansion Base Blade in the
CHS2U B-US Controlling Chassis...................................... 3-30
3.5.2.3 Install the PZ-BS11 Expansion Blade in the
CHS2U B-US Expansion Chassis....................................... 3-33
3.5.2.4 Connect the Controlling and Expansion Chassis................ 3-36
3.5.3 Installing Grounding on 9.5” Base and Expansion
Chassis .....................................................................................3-38
3.5.4 Install Grounding on Multiple 9.5” Base and Expansion
Chassis .....................................................................................3-38
3.5.5 Install AC Power Cord on 9.5” Base and Expansion
Chassis .....................................................................................3-39
3.5.6 Install AC Power Cord on Multiple 9.5” Base and
Expansion Chassis....................................................................3-39
3.5.7 Install Additional Blades in the 9.5” Base and
Expansion Chassis....................................................................3-39

UNIVERGE SV8100 Issue 2.0
System Hardware Manual - v
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual v
___________________________________________________________________________________
3.5.8 Applying Power to the 9.5” Base and Expansion Chassis........3-39
Section 4 Wall Mounting the Chassis....................................................... 3-39
4.1 Wall Mounting the 19” (CHS2U-US) Chassis.............................3-39
4.1.1 CHS2U-US Chassis Wall Mount Installation.............................3-39
4.2 Wall Mounting the 9.5” Gateway (CHS2U GW-US) and
Base (CHS2U B-US) Chassis.....................................................3-47
4.2.1 Option 1 – Wall Mount Bracket (Standard) to Wall...................3-48
4.2.2 Option 2 – Wall Mount Bracket (Keyhole) to Chassis...............3-53
4.3 Wall Mounting the 9.5” Base (CHS2U B-US) and
Expansion (CHS2U E) Chassis..................................................3-59
4.3.1 9.5” Base and Expansion Chassis Wall Mount
Installation.................................................................................3-61
Section 5 Floor Mounting the Chassis ..................................................... 3-67
5.1 Floor Mounting the 19” (CHS2U-US) Chassis............................3-67
5.1.1 CHS2U-US Chassis Installation................................................3-67
5.1.2 Multiple CHS2U-US Chassis Installation..................................3-70
Section 6 Stand Mounting the Chassis .................................................... 3-71
6.1 Stand Mounting the 19” (CHS2U-US) Chassis...........................3-71
6.1.1 CHS2U-US Chassis Installation................................................3-71
6.1.2 Multiple CHS2U-US Chassis Installation..................................3-74
6.2 Stand Mounting the 9.5” Gateway (CHS2U GW-US)
and Base (CHS2U B-US) Chassis..............................................3-77
Section 7 Rack Mounting the Chassis...................................................... 3-81
7.1 Rack Mounting the 19” (CHS2U-US) Chassis............................3-81

Issue 2.0 UNIVERGE SV8100
___________________________________________________________________________________
vi Table of Contents
___________________________________________________________________________________
7.2 Rack Mounting the 9.5” Base (CHS2U B-US) and
Expansion (CHS2U E) Chassis ..................................................3-83
7.2.1 CHS2U B-US and CHS2U E Chassis Installation.....................3-83
Section 8 Battery Connection................................................................... 3-87
8.1 Installing the Internal Batteries 19” (CHS2U-US) Chassis..........3-87
8.2 Installing the External Batteries 19” (CHS2U-US) Chassis.........3-92
8.2.1 Floor Mounting the CHS LARGE BATT BOX............................3-93
8.2.2 Battery Installation.....................................................................3-94
8.2.3 CHS LARGE BATT BOX to CHS2U-US Connection................3-98
8.2.4 CHS LARGE BATT BOX Fuse Replacement .........................3-101
8.3 Installing the External Batteries (CHSGW SMALL
BATT BOX) on 9.5” Gateway (CHS2U GW-US) and
Base (CHS2U B-US) Chassis...................................................3-104
8.3.1 CHSGW SMALL BATT BOX Installation.................................3-104
8.3.2 CHSGW SMALL BATT BOX to 9.5” Gateway
(CHS2U GW-US) or Base (CHS2U B-US) Chassis
Connection..............................................................................3-106
8.3.3 CHSGW SMALL BATT BOX Fuse Replacement....................3-108
8.4 Installing the External Batteries (CHS LARGE BATT
BOX) to the 9.5” Gateway (CHS2U GW-US) or Base
(CHS2U B-US) Chassis............................................................3-109
8.4.1 CHS LARGE BATT BOX Installation ......................................3-109
8.4.2 CHS LARGE BATT BOX to 9.5” Gateway
(CHS2U GW-US) or Base (CHS2U B-US)
Chassis Connection................................................................3-110
8.4.3 CHS LARGE BATT BOX Fuse Replacement .........................3-111
Section 9 Power Supply .......................................................................... 3-111

UNIVERGE SV8100 Issue 2.0
System Hardware Manual - vii
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual vii
___________________________________________________________________________________
Section 10 Remove and Install Cooling Fan............................................ 3-112
10.1 CHS2U-US Chassis..................................................................3-112
10.1.1 Remove Cooling Fan ...........................................................3-112
10.1.2 Install Cooling Fan..................................................................3-113
Chapter 4 Installing the SV8100 Blades
Section 1 General Information .................................................................... 4-1
1.1 Slot Locations...............................................................................4-1
Section 2 Installation................................................................................... 4-4
2.1 Installation and Safety Precautions ............................................4-4
2.2 Installing an Extension or Trunk Blade.........................................4-5
2.2.1 Installing the Blades....................................................................4-5
2.2.2 Order of Installing Extension Blades...........................................4-6
2.2.3 Order of Installing Trunk Blades .................................................4-7
2.2.3.1 Installing CD-4COTB, CD-4DIOPA, CD-4ODTA
or CD-2BRIA Blades..............................................................4-7
2.2.3.2 Installing CD-PRTA (T1/PRI) Blades.....................................4-8
2.3 Remove an Extension or Trunk Blade..........................................4-8
2.4 Uninstalling a Blade Slot Through Software.................................4-9
2.5 Blade Capacities...........................................................................4-9
2.6 Powering Up the SV8100 System ................................................4-9
2.6.1 Performing a Cold Start ..............................................................4-9
2.6.2 Performing a Hot Start..............................................................4-10
2.6.3 Resetting the System................................................................4-10
2.6.3.1 Initial Programming..............................................................4-10
2.6.3.2 Port Defaults........................................................................4-11
2.6.3.3 Setting Up Extension Circuit Types.....................................4-11

Issue 2.0 UNIVERGE SV8100
___________________________________________________________________________________
viii Table of Contents
___________________________________________________________________________________
2.6.3.4 Saving Your Configuration.................................................. 4-12
2.6.3.5 Backing Up/Restoring a Database...................................... 4-12
2.6.4 Performing a Software Upgrade................................................4-14
Section 3 Common Control Blades.......................................................... 4-16
3.1 CD-CP00-US (SV8100 Central Processing Unit) .......................4-16
3.1.1 Description................................................................................4-17
3.1.2 Installation.................................................................................4-20
3.1.3 Switch Settings..........................................................................4-21
3.1.4 LED Indications.........................................................................4-22
3.1.5 Connectors................................................................................4-24
3.2 PZ-ME50-US (Memory Expansion Daughter Board)..................4-26
3.2.1 Description................................................................................4-26
3.2.2 Installation.................................................................................4-27
3.3 PZ-VM21 (Voice Mail Daughter Board) .....................................4-29
3.3.1 Description................................................................................4-29
3.3.2 Installation.................................................................................4-30
3.3.3 Switch Settings..........................................................................4-32
3.4 PZ-32IPLA/PZ-64IPLA/PZ-128IPLA (Voice over IP
Daughter Boards)........................................................................4-32
3.4.1 Description................................................................................4-32
3.4.2 Installation.................................................................................4-33
3.4.3 Switch Settings..........................................................................4-33
3.4.4 LED Indications.........................................................................4-34
3.4.5 Connectors................................................................................4-35
3.5 MGN-U10 ETU (IPK/IPK II Migration Board)..............................4-37
3.5.1 Description................................................................................4-37
3.5.2 Conditions.................................................................................4-38

UNIVERGE SV8100 Issue 2.0
System Hardware Manual - ix
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual ix
___________________________________________________________________________________
3.5.3 Installation.................................................................................4-38
3.5.4 Supported Hardware (IPK II).....................................................4-39
3.5.5 Optional Equipment ..................................................................4-41
3.5.6 Supported Terminals.................................................................4-42
3.5.7 Switch Settings .........................................................................4-43
3.5.8 LED Indications.........................................................................4-44
3.5.9 Connectors................................................................................4-44
Section 4 Station Blades............................................................................ 4-46
4.1 CD-8DLCA/CD-16DLCA (Digital Station Interface) ...................4-46
4.1.1 Description................................................................................4-47
4.1.2 Installation.................................................................................4-48
4.1.3 LED Indications.........................................................................4-48
4.1.4 Connectors................................................................................4-49
4.2 PZ-8DLCB (Digital Station Daughter Board) ..............................4-51
4.2.1 Description................................................................................4-51
4.2.2 Installation.................................................................................4-51
4.2.3 PZ-8DLCB Daughter Board Cable Connection.........................4-52
4.3 CD-4LCA/CD-8LCA (4-Port/8-Port Single Line Interface)..........4-53
4.3.1 Description................................................................................4-54
4.3.2 Installation................................................................................4-55
4.3.3 LED Indications.........................................................................4-56
4.3.4 Connectors................................................................................4-57
4.4 PZ-4LCA/PZ-8LCE (4-Port/8-Port SLI Daughter Board) ............4-58
4.4.1 Description................................................................................4-60
4.4.2 Installation.................................................................................4-60
4.4.3 Connectors................................................................................4-61

Issue 2.0 UNIVERGE SV8100
___________________________________________________________________________________
xTable of Contents
___________________________________________________________________________________
4.5 CD-LTA (Dterm/SLT Combination) ..............................................4-62
4.5.1 Description................................................................................4-62
4.5.2 Installation.................................................................................4-63
4.5.3 LED Indications.........................................................................4-64
4.5.4 Connectors................................................................................4-65
Section 5 Trunk Blades ............................................................................. 4-66
5.1 CD-4COTB (4 Loop and Ground Start Interface)........................4-66
5.1.1 Description................................................................................4-66
5.1.2 Installation.................................................................................4-67
5.1.3 LED Indications.........................................................................4-68
5.1.4 Connectors................................................................................4-69
5.2 PZ-4COTF (4 Loop and Ground Start Interface
Daughter Board) .........................................................................4-70
5.2.1 Description................................................................................4-70
5.2.2 Installation.................................................................................4-71
5.2.3 Connectors................................................................................4-72
5.3 CD-2BRIA (2 Basic Rate Interface) ............................................4-73
5.3.1 Description................................................................................4-73
5.3.2 Installation.................................................................................4-74
5.3.3 LED Indications.........................................................................4-75
5.3.4 Connectors................................................................................4-76
5.4 PZ-2BRIA (2 Basic Rate Interface Daughter Board)...................4-77
5.4.1 Description................................................................................4-78
5.4.2 Installation.................................................................................4-78
5.4.3 Connectors................................................................................4-79