NEUTRIK powerCON TRUE1 TOP User manual

Note:
The proper twist-lock is
achieved when the silvery tab is
in the position shown in C and
an audible «click» is heard.
SAFETY NOTICE
R
A
C
click
Note:
When connecting, match the notch on
the cable connector to the
corresponding guide slot on the chassis.
Note:
After inserting properly as in
illustration , twist the
cable connector clockwise to
lock.
A
SAFETY WARNING
incorrect insertion may
cause electrical contact
misalignment resulting in
equipment malfunction
and/orpersonalinjury.
BC
Please regularly check the condition of your powerCON TRUE1 connector system (cableTOP
connector & chassis) for clear signs of wear andtear.
Through improper use and the excessive use of force, the encoding lugs and guide slots in the
connector system can become so severely worn or damaged that it is possible to insert the cable
connector the wrong way. However, when inserted the wrong way, the cable connector should not
twist-lock into place.
A cable connector inserted the wrong way could, in some circumstances, lead to/plug connector
contact between live wires and the grounding contact in the plug socket.
To determine that the cable connector is inserted correctly, follow the use/plug connector
instructions and listen for the “click” when performing the twist-lock. Immediately unplug any
connector that does not twist-lock correctly in place.
www.neutrik.com
R
NEUTRIK AG T: F:LI +423 / 237 24 24 [phone]/
NEUTRIK USA Inc. T: F:USA +1 704 / 972 3050 [phone]/
NEUTRIK UK Ltd.
() T: F:UK +44 1983 / 811 441 [phone]/
NEUTRIK Vertriebs GmbH T: F:DE/NL/AT/DK +49 8131 / 280 890 [phone]/
NEUTRIK France FR T: F:[phone] [phone]//
NEUTRIK Tokyo Ltd. JP T: F:[phone] [phone]//
NEUTRIK Hong Kong Ltd. T: F:HK [phone] [phone]//
NEUTRIK India Pvt. Ltd. IND T: F:+ [phone]/ 982 05 43 424 /
Page 1 of 2
Draft. Nr.: BDA 559 Update: .20115.11 8
II
Data subject to change without prior notice. 201 NEUTRIK ALL RIGHTS RESERVED8 . NEUTRIK are registered trademark of NEUTRI AG. .©®®
powerCON®TRUE1 TOP
max.
1 Newton

ANote:
When connecting,
match the notch on
the cable connector
to the
corresponding
guide slot on the
plug connector.
Note:
After inserting
properly as in
illustration , twist
the cable connector
clockwise to lock.
A
BC
A
Note:
The proper twist-
lock is achieved
when the silvery
tab is in the
position shown in
C and an audibel
«click» is heard.
C
Note:
The proper twist-
lock is achieved
when the silvery
tab is in the
position shown in
C and an audibel
«click» is heard.
C
Note:
When connecting,
match the notch on
the plug connector
to the
corresponding
guide slot on the
chassis.
Note:
After inserting
properly as in
illustration , twist
the plug connector
clockwise to lock.
A
BC
www.neutrik.com
R
Page 2 of 2
SAFETY NOTICE
R
Draft. Nr.: BDA 559 Update: .20115.11 8
II
Data subject to change without prior notice. 201 NEUTRIK ALL RIGHTS RESERVED8 . NEUTRIK are registered trademark of NEUTRI AG. .©®®
NEUTRIK AG T: F:LI +423 / 237 24 24 [phone]/
NEUTRIK USA Inc. T: F:USA +1 704 / 972 3050 [phone]/
NEUTRIK UK Ltd.
() T: F:UK +44 1983 / 811 441 [phone]/
NEUTRIK Vertriebs GmbH T: F:DE/NL/AT/DK +49 8131 / 280 890 [phone]/
NEUTRIK France FR T: F:[phone] [phone]//
NEUTRIK Tokyo Ltd. JP T: F:[phone] [phone]//
NEUTRIK Hong Kong Ltd. T: F:HK [phone] [phone]//
NEUTRIK India Pvt. Ltd. IND T: F:+ [phone]/ 982 05 43 424 /
powerCON®TRUE1 TOP
SAFETY WARNING
incorrect insertion may
cause electrical contact
misalignment resulting in
equipment malfunction
and/orpersonalinjury.
SAFETY WARNING
incorrect insertion may
cause electrical contact
misalignment resulting in
equipment malfunction
and/orpersonalinjury.
max. 1 Newton
max. 1 Newton