Ninja JC100 Series User manual

ninjakitchen.com
COLD PRESS JUICER
JC100
Series
OWNER’S GUIDE

3ninjakitchen.com
2ninjakitchen.com
CONTENTS
THANK YOU
for purchasing the Ninja® Cold Press Juicer
Important Safety Instructions� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Features� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the Filters for Pulp Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the Juicer � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Care & Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Overloading the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �11
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
TIP: You can find the model and serial
numbers on the QR code label on the
back of the unit by the power cord.
RECORD THIS INFORMATION
Model Number: ��������������������
Serial Number: ���������������������
Date of Purchase: �������������������
(Keep receipt)
Store of Purchase: ������������������
REGISTER YOUR PURCHASE
registeryourninja.com
Scan QR code using mobile device
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 150 Watts

5ninjakitchen.com
4ninjakitchen.com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all
warnings and instructions. This unit
contains electrical connections and
moving parts that potentially present
risk to the user.
3 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
4 Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
5 Always make sure pulp spout is securely
in place before motor is turned on. DO
NOT unfasten parts while juicer is in
operation.
6 Be sure to turn the appliance o after
each use. Make sure the motor stops
completely before disassembling.
7 Turn the appliance OFF, then unplug the
appliance from the outlet when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull
from the outlet. NEVER unplug by
grasping and pulling the flexible cord.
8 Before use, wash all parts that may
contact food. Follow washing
instructions covered in this instruction
manual.
9 Before each use, inspect auger for
damage. If a auger is bent or damage is
suspected, contact SharkNinja to
arrange for replacement.
10 DO NOT use this appliance outdoors. It
is designed for indoor household use
only.
11 This appliance has a polarized plug (one
prong is wider than the other). To
reduce the risk of electric shock, this
plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT modify the plug in any way.
12 DO NOT operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If
damaged, contact SharkNinja for
servicing.
13 This appliance has important markings
on the plug blade. The entire supply
cord is not suitable for replacement. If
damaged, please contact SharkNinja for
service.
14 Extension cords should NOT be used
with this appliance.
15 To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
16 DO NOT allow the cord to hang over the
edges of tables or counters. The cord
may become snagged and pull the
appliance o the work surface.
17 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves
and other heating appliances.
18 ALWAYS use the appliance on a dry
and level surface.
19 DO NOT allow children to operate this
appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
20 This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
21 ONLY use attachments and accessories
that are provided with the product or
are recommended by SharkNinja. The
use of attachments, including canning
jars, not recommended or sold by
SharkNinja may cause fire, electric
shock, or injury.
22 DO NOT put your fingers or other
objects into the juicer opening while it is in
operation. If food becomes lodged in
opening, use the tamper or another piece
of fruit or vegetable to push it down.
When this method is not possible, turn the
motor o and disassemble juicer to
remove the remaining food.
23 Keep hands, hair, and clothing out of the
container when loading and operating.
24 During operation and handling of
the appliance, avoid contact with
moving parts.
25 DO NOT use the appliance if the
rotating sieve is damaged.
26 DO NOT operate the appliance without
the pulp container in place.
27 DO NOT microwave container or
accessories provided with the appliance.
28 NEVER leave the appliance unattended
while in use.
29 DO NOT juice hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the
user being burned.
30 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
attachments are properly installed before
operation.
31 Before operation, ensure all utensils are
removed from container. Failure to
remove utensils can cause container to
shatter and potentially result in personal
injury and property damage.
32 DO NOT attempt to remove the feed
chute chamber from the motor base
while the auger is still spinning. Allow
the appliance to come to a complete
stop before removing attachments.
33 If the appliance is overloaded, the unit
will temporarily disable the motor. Wait
approximately 2 minutes before using
again.
34 DO NOT juice hot ingredients.
35 Remove the seeds and pits from such as
mangoes or plums, as well as peels and
tough skins from fruits such as oranges,
lemons, and limes, as they could
damage the unit.
36 DO NOT add water to the feed chute
while the unit is operating to clean the
unit.
37 DO NOT submerge the motor base or
control panel in water or other liquids.
38 DO NOT spray motor base or control
panel with any liquid.
39 DO NOT attempt to sharpen auger.
40 Turn o the appliance and unplug the
motor base before cleaning.
41 DO NOT add frozen fruit, frozen
vegetables, or ice to the juicer.
42 Consumers with sensitivity to pulp may
wish to strain their juice as a precaution.
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance
for other than intended use�

6ninjakitchen.com 7ninjakitchen.com
PARTS
D
BEFORE FIRST USE
ACleaning Brush
BTamper
CFood Tray
DFeed Chute Chamber
with Anti-Drip Lever
EAuger
FBlack Filter (no pulp)
GGray Filter (some pulp)
(not available with all models)
HOrange Filter (lots of pulp)
IPulp Spout
JJuice Jug
KPulp Container
LMotor Base (power cord not shown)
To purchase more accessories and find
great recipes, visit ninjakitchen.com.
B
A
C
E
G
H
K
J
L
I
1 Remove all packaging materials from
the unit.
2 Wash parts in warm, soapy, water, then
thoroughly rinse and air-dry all parts.
3 Wipe control panel with a soft cloth. Allow
it to dry completely before using.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
NOTE: All attachments are BPA free
and dishwasher safe.
FEATURES
USING THE CONTROL PANEL
USING THE FILTERS FOR PULP CONTROL
START/STOP
Press once to start continuous running up to 12 minutes; press again to stop.
REVERSE
If the feed chute chamber becomes blocked or ingredients are not
processing, press and hold REVERSE. There will be a beep and a brief
pause, then the auger will rotate in the opposite direction. Release
REVERSE to stop. Repeat as needed. Press START/STOP to resume
normal operation.
Use the
orange filter
with the
largest mesh
for juice
with lots
of pulp.
Use the gray
filter* with
the larger
mesh for
juice with
some pulp.
Control the amount of pulp by choosing the desired filter.
Use the black
filter with the
finest mesh
for juice with
no pulp.
*not available with all models
F

9ninjakitchen.com
8ninjakitchen.com
USING THE JUICER
7Select START/STOP, then gradually add
ingredients to the feed chute. For best
results, allow juicer to process each
ingredient before adding more to the
feed chute. Use the tamper to push
ingredients down through the feed
chute, as needed.
8When juicing is complete, select
START/STOP, then close the anti-drip
lever. Stir juice and serve.
9 To disassemble, press and hold the
RELEASE button while turning the
feed chute chamber clockwise and
remove from motor base.
10 Remove the pulp spout from the feed
chute chamber by turning clockwise
Then, remove the filter and auger.
11 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
1 Plug in motor base and place on a
clean, dry, level surface such as a
countertop or table.
2Insert the auger into the feed chute
chamber, then attach the desired filter
onto the auger, with the metal portion
of the filter on the bottom of the auger.
3 Install the pulp spout in the feed
chute chamber, on top of the filter,
by installing at an angle then turning
counterclockwise to lock in place.
4Install the assembled feed chute
chamber on the motor base at an angle,
then turn counterclockwise until it
clicks into place.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
5Install the food tray on the top of the
feed chute.
6Place the pulp container under the pulp
spout, then place the juice jug under
the anti-drip lever on the feed chute
chamber.
NOTE: If the feed chute chamber becomes
blocked or ingredients are not processing,
press and hold REVERSE. There will be a
beep and a brief pause, then the auger will
rotate in the opposite direction. Release
REVERSE to stop. Repeat as needed. Press
START/STOP to resume normal operation.
IMPORTANT: DO NOT add frozen fruits
and vegetables or ice to the unit.
Align the metal portion
of the filter with the
bottom of the auger.
Make sure the
anti-drip lever
is open before
juicing.

10 ninjakitchen.com 11ninjakitchen.com
CARE & MAINTENANCE
CLEANING
• Hand-Washing
Separate all parts and wash in warm,
soapy water with a soft cloth. Thoroughly
rinse and air-dry all parts.
• Dishwasher
All parts, except the motor base, are
dishwasher safe.
• Motor Base
Unplug the motor base before cleaning.
Wipe with a clean, damn cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
• Using the Cleaning Brush
Use the included cleaning brush to clean
hard-to-reach places, as well as remove
excess residue.
Use the end of the cleaning brush to clear
any buildup left over after juicing.
Use the bristle side of the cleaning
brush to clean the filter, if needed.
STORING
For cord storage, wrap cord with hook-and-
loop fastener near the back of the motor base.
DO NOT wrap the cord around the bottom
of the base for storage.
Store the auger and filter assembled in the
feed chute chamber with the pulp spout
installed. Place the juice jug into the pulp
container for easy storage.
OVERLOADING THE UNIT
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the motor. If the unit is overloaded,
the motor will be temporarily disabled.
Should this occur, wait 2 minutes, then press
START/STOP to start the unit.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
So we may better assist you, please register
your product online at registeryourninja.com
and have the product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjaaccessories.com.
IMPORTANT: DO NOT add water to the
feed chute while the unit is operating to
clean the unit.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
unplug unit before troubleshooting�
The REVERSE program is not operating�
•After pressing and holding REVERSE, there will be a beep and a brief pause, then the
auger will rotate in the opposite direction. Release REVERSE to stop. Repeat as needed.
Press START/STOP to resume normal operation.
There is a buildup of pulp in the feed chute chamber�
•There may be a clog in the pulp spout. Press START/STOP to stop the unit, then
remove the pulp spout. Use the end of the cleaning brush to clear the clog, then
reinstall the pulp spout to the feed chute chamber. Resume juicing.
•For best results, allow juicer to process each ingredient before adding more to the feed
chute. Use the tamper to push ingredients down through the feed chute, as needed.
The unit stopped working and is beeping�
•The unit was overloaded with ingredients. Wait 2 minutes then press START/STOP
to start the unit.
Can I juice fruit with seeds and pits in it?
•No. Seeds and pits should be removed from the fruit prior to juicing. For example,
remove the seeds from cherries and the pit from a plum.
Can I juice frozen fruits and vegetables or add ice?
•No, do not use frozen fruit, frozen vegetables, or ice with this unit.
The unit makes a squeaking noise when I juice certain ingredients�
•When the auger is breaking down fibrous ingredients like apples, celery, herbs and leafy
greens, the unit will sometimes make this noise. This is normal and not a cause for concern.

13ninjakitchen.com
12 ninjakitchen.com
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the
original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship
for a period of one (1) year from the date of purchase when it is used under normal
household conditions and maintained according to the requirements outlined in the
Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months
following the receipt date of the replacement unit or the remainder of the existing
warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of
equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as the filter, auger, juice jug, etc.), which
require regular maintenance and/or replacement to ensure the proper functioning
of your unit, are not covered by this warranty. Replacement parts are available for
purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and
other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include
damages caused in the process of shipping, altering, or repairing the SharkNinja
product (or any of its parts) when the repair is performed by a repair person not
authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, visit ninjakitchen.com/support for product care and maintenance
self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist
with product support and warranty service options, including the possibility of upgrading to
our VIP warranty service options for select product categories. So we may better assist you,
please register your product online at registeryourninja.com and have the product on hand
when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships the
repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof
of purchase. We also ask that you register your product online at registeryourninja.com and
have the product on hand when you call, so we may better assist you. A Customer Service
Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY
NOTES

15ninjakitchen.com
14 ninjakitchen.com
NOTES NOTES

SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen�com
Illustrations may dier from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change withoutnotice.
NINJA is a registered trademarks of Shark Ninja Operating LLC.
For SharkNinja U.S. patent information, visit sharkninja.com/uspatents/
© 2020 SharkNinja Operating LLC
PRINTED IN CHINA
JC100Series�IB�MP�Mv9 @ninjakitchen