Noble House Home Furnishings CHC2255 User manual

Please look in the Arm Panel for hardware packs
CAUTION: You must read this Assembly Instructions
before you proceed
1 OF 7
CAUTION: This Rocking Chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Rocking Chair and to prevent damage to the Rocking Chair,
02 persons may be needed to execute this action.

2 OF 7
Screws
(M7x90mm)
Screws
(M6x65mm)
Allen Wrench
Left Arm Panel
Right Arm Panel
Seat Panel
Backrest Panel
Before Beginning Assembly:
x5
x5
x1

3 OF 7
This Rocking Chair has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Rocking Chair parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions herebelow to familiarise the parts
and steps before assembly
Unpack and place all parts on a clean, non-marring surface.
Seat Panel (C)

4 OF 7
With the help of your adult partner, position Seat Panel (C) and Right Arm Panel (B) then
affix Right Arm Panel (B) with Seat Panel (C) by using Screws (①) and Allen Wrench (③)
as shown in picture above.
DO NOT FULLY TIGHTEN SCREWS.
Note: The curve side is the front side
The Front Side
With the help of your adult partner, align the wooden dowel of Backrest Panel (D) into the
position in the arm of the assemble in step 2 then secure Right Leg Panel (B) to Backrest
Panel (D) by using Screws (②) and Allen Wrench (③) as shown in picture above.
DO NOT FULLY TIGHTEN SCREWS

5 OF 7
With the help from your partner, turn over the assemble in step 3
Then position Left Arm Panel (A) to the Backrest Panel (D) and Seat Panel (C)
Repeat the same process as step 2 and step 3 using Screws (①), Screws (②) to designated
points
DO NOT FULLY TIGHTEN SCREWS.

6 OF 7
Turn the Rocking Chair right side up.
Place the Rocking Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit into to the Rocking Chair.
This would help to align all the parts at all the joint areas.
Then get off the Rocking Chair and in a sequential manner, proceed to tighten all screws
To tighten the Screws at the base of the Backrest, do secure assistance from your adult
partner(s).
You may be required to turn the Rocking Chair, to gain easy access to the secure points.
Turn the Rocking Chair a synchronised manner.
CAUTION: When tightening these screws, tighten sequentially.
DO NOT tighten any screw fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbles, loosen the screws and execute this same process.
WARNING!! IF ROCKING CHAIR IS NOT STABLE, IT COULD LEAD TO DAMAGING
THE PRODUCT.

Noble House Home Furnishings LLC
ü
ü
7 OF 7
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only
.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.
Children should not climb or jump on the furniture.
Care & Maintenance
To obtain the longest lifespan of your outdoor products,
minimizing exposure to direct sunlight is recommended.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.