Noble House Home Furnishings LOVESEAT User manual

Caution : You must read this before you proceed
LOVESEAT
Please look in the inner box under seat for hardware pack and legs.
Noble House Home Furnishings LLC Page 1 OF 7

Label Picture Description QTY
A Seat 1
B Front Leg 2
C Back Leg 2
Label Picture Description QTY
①Bolt (M8*63MM) 5
②Bolt (M8*57MM) 5
③Spring Washer 10
④Washer 10
⑤Allen Wrench 1
Noble House Home Furnishings LLC Page 2 OF 7

Overview
Before
Beginning
Assembly
:
FRONT FACING
Front Leg(B)
Seat(A)
Front Leg(B)
Noble House Home Furnishings LLC Page 3 OF 7

Step 1
Step 2
This Loveseat has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Loveseat parts, the above picture
is to help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
With the assistance from a second adult,place the Seat(A) on a clean, non-
marring surface with the bottom facing you, as shown in picture above.
Remove the Legs and Hardware from the inner box.
A
Seat(A)
Seat (A)
Back Leg (C)
Front Legs (B) Back Legs (C
）
Noble House Home Furnishings LLC Page 4 OF 7

Step 3
Step 3
With the assistance from a second adult,attach the two Back Legs(C) to the
Seat(A) using Bolts(②), Spring Washers(③) and Washers(④) with the Allen
Wrench(⑤).
Do not fully tighten the Bolts.
Attach the two Front Legs(B) into the mounting positions of the Seat(A) using
Bolts(①), Spring Washers(③) and Washers(④) with the Allen Wrench(⑤).
Do not fully tighten the Bolts.
Test for Stability
Front Leg(B)
Seat(A)
Seat (A)
Front Leg (B)
Front Leg (B)
Noble House Home Furnishings LLC Page 5 OF 7

Step 5
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
Stand the Loveseat up.
Place the Loveseat on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully, sit on the Loveseat.
This will help to align all parts at all joints.
Then get off the Loveseat, and carefully place the Loveseat facedown.
Then proceed to tighten all Bolts at all joints in a sequential manner.
If there are any wobbles after tightening, loosen the Bolts and execute the
same process.
Noble House Home Furnishings LLC Page 6 OF 7

Care & Maintenance
●Do not put hot items directly on furniture surface.
●Do not clean furniture with harsh cleansers or polish.
●Do not place furniture under direct sunlight.
●Dust and pick-up spills using a clean, non-colored,
lint-free cloth.
●Do not place furniture near heating or cooling vents.
●Furniture may scratch floors. We recommend using
furniture pads to protect your floors.
●Do not write on furniture without a padded barrier to
protect the surface.
●Do not place furniture outside . For indoor use only.
●Not for commercial use. For residential use only.
●Stains may be removed with mild soap solution and
damp cloth.
●Children should not climb or jump on the furniture.
Noble House Home Furnishings LLC Page 7 OF 7