Noble House Home Furnishings BEDSIDE User manual

WARNING!!
Children have died from furniture tipover. Tip restraints
have been included with this product; you must install the
tip restraints according to these instructions in order to
minimize the risk of furniture tipping. If you have any
questions about this product or the tip restraint, please
send us an email at
[email protected]
NEVER allow children to climb or hang on furniture,
In addition to installing the restrains，to help prevent tip-
over
1. NEVER put a TV or other heavy objects on top of this
product".
2. Do not stand on the product.
NEVER allow children to climb or hang on furniture,
including drawers or cabinet doors.
!
WARNING
ALWAYS install t ipover r estraint
provided.
NEVER put a TV on this p roduct.
NEVER allow c hildren t o stand,
clim b or hang o n draw ers,doors,
or shelves.
NEVER open m ore t han o ne
draw er at a time.
Place h eaviest i tem s on the
low est d raw ers.
Do not defeat o r rem ove t he
draw er interlock s ystem .
This i s a perm anent l able
Do not rem ove
Children h ave d ied f rom
furniture t ipover. T o reduce t he
risk o f furniture t ipover.
Page 1of 7
Noble house Home Furnishings LLCNoble house Home Furnishings LLC

Caution : You must read this before you proceed
BEDSIDE
Label Picture Description QTY
Screwdriver (not provided) 1
Knob 3
Assembly Instructions
Hardware
1
2
Page 2 of 7
Noble house Home Furnishings LLCNoble house Home Furnishings LLC

③Power Drill (not provided) 1
④
Bracket 2
⑤ Wall Plug Screw(M20mmx5mm) 4
⑥Wall Plug(40mmx5mm) 4
⑦ Tipover Restraint Strap 2
⑧Hammer(not provided) 1
Before
Beginni
ng
bly:
Assembly Preparation
2x
Read instructions, cover to cover .
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging untill finished.
Assem
Page 3 of 7
Noble house Home Furnishings LLCNoble house Home Furnishings LLC

Overview
This Bedside has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Bedside parts,
the above picture is to help you put the various parts into perspective.
Please read through the instructions herebelow to familiarise the parts
and steps before assembly.
Bedside
Step 1
With help of your adult partner, carefully stand the Bedside.
1.1 Put out the drawers and deassemble the Knob(②)with the help of
hand and rotate towards the left side.
1.2 Install the Knob(②)on the drawers with the help of hand towards
the right side as pictured above.
Assembly Steps
Page 4 of 7
1.1 1.2
Noble house Home Furnishings LLCNoble house Home Furnishings LLC
FRONT FACING

Serious or fatal crushing injuries can occur from tipping furniture.
To help prevent tip-over: ALWAYS secure this furniture to the wall
using Tipover Restraint Device.
See product instructions for more ways to help prevent furniture
tip-over.
Tipover Restraint Device Installation Instructions
Usage For Tipover Restraint Device:
product, use Tipover Restraint Strap ( ) to connect the Brackets ( ).
!
WARNING
To secure Bedside against wall, attach two Brackets ( ) on wall and
Page 5 of 7
4
74
Noble house Home Furnishings LLCNoble house Home Furnishings LLC

Step 2
2.1) Drill two holes on wall at same height as Brackets ( ) on Bedside
with Power Drill ( ).
You can mark these points in two ways as below:
1) Move the Bedside back to the wall. Mark two points same
2.1
6
8
3
2.2
8
Step 3
height as Bedside on the wall.
Note: The Brackets need to be secured to solid, load bearing surface.
Please use a Stud Finder(not supplied) if needed to locate the Wall
Frame.
2) Measure the height of the Brackets ( ) with ruler/measuring tape
and mark on wall to keep them accurate and same height.
2.2) Insert Wall Plugs ( ) into drilled holes on wall with Hammer ( ).
Attach Brackets ( ) to Wall Plugs ( ) using Wall Plug Screws ( )
with Screwdriver ( ).
Page 6 of 7
56
6
4
5
1
4
4
4
3
4
8
6
4 6 5
1
Noble house Home Furnishings LLCNoble house Home Furnishings LLC

Step 4
Move Bedside to the wall.
Care & Maintenance
Move
Pull the Tipover Restraint Straps ( ) through the Brackets ( ) on the
wall and Bedside table one by one, and pull the Tipover
Restraint Straps ( ) tight.
This Bedside is now ready to use.
Caution: This Bedside can only be used on flat, level surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture under direct sunlight.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a passed barner to protect the
surface.
Do not place furniture outside. for indoor use only.
Not for commercial use. for residential use only.
Stains may be removed with mild soap solution and damp cloth.
Children should not climb or jump on the furniture.
Dust and pick - up shills using a clean, non-colored, lint-free cloth.
Do not put hot items directly on furniture surface
Furniture may scratch floors. We recommend using
furniture pads to protect your floors.
4
7
4
Page 7 of 7
4
7
7
Noble house Home Furnishings LLCNoble house Home Furnishings LLC