Nortel 1100 Series User manual

Expansion Module for IP Phone 1100
Series
User Guide
Title page

Revision history
3
Revision history
December 2006
Standard 01.02. This document is up-issued to include updates based on
feedback. Expansion Module for the IP Phone 1100 series terminology
has been updated.
December 2006
Standard 01.01. This document is up-issued to include updates based on
feedback. Regulatory and safety information chapter was updated after a
review. This is a new user guide for the Expansion Module for the IP
Phone 1100 series.

Revision history
4

Contents
5
Contents
About the Expansion Module for IP Phone 1100 Series . . . 7
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setup and assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installing the Expansion Module . . . . . . . . . . . . . . . . . . . . . . . 11
Expansion Module startup initialization . . . . . . . . . . . . . . . . . 14
Using the wall-mount option . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the tilt base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Controls and settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Shift key functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Services key operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Display diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Regulatory and safety information . . . . . . . . . . . . . . . . . . . 19
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DenAn regulatory notice for Japan . . . . . . . . . . . . . . . . . . . . . 21
Terms you should know . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Contents
6

About the Expansion Module for IP Phone 1100 Series
7
About the Expansion Module for
IP Phone 1100 Series
This document describes the Expansion Module for IP Phone 1100
Series (Expansion Module) and how to use it with the IP Phone.
Description
The Expansion Module is supported on the following IP Phones:
• IP Phone 1120E
• IP Phone 1140E
• IP Phone 1150E
The Expansion Module is a hardware accessory that connects to the
IP Phone and provides additional line appearances and feature keys.
Up to three modules are supported. The IP Phone 1120E, IP Phone
1140E, and IP Phone 1150E can have up to 54 additional line/feature
keys with three Expansion Modules.
Figure 1 on page 8 shows the IP Phone 1140E with an Expansion Module
attached.

About the Expansion Module for IP Phone 1100 Series
8
Figure 1: IP Phone 1140E with Expansion Module
Features
The Expansion Module has the following features:
• 18 keys provide up to 36 additional self-labeled line/programmable
feature keys when using the Shift feature. Using the Shift key
functionality, an IP Phone 1140E, for example, can have up to 66
additional logical line/feature keys.
• Upgradeable firmware using a TFTP or a UFTP Server.
• A desk-mount bracket and structural baseplate support the
connection of an Expansion Module for IP Phone 1100 Series to an
IP Phone, or to another Expansion Module.
• IP Phone and Expansion Module combination can be wall-mounted
using the wall mount template provided.

About the Expansion Module for IP Phone 1100 Series
9
Adjusting the display
The Expansion Module is equipped with a graphical, pixel-based,
grayscale LCD display area beside the 18 line/feature keys (see Figure 1
on page 8). Each of the 18 physical keys on the Expansion Module has a
10-character display label. This label is set automatically, however, the
user can edit the label using the controls on the IP Phone.
To adjust the display and contrast on the Expansion Module, use the
Contrast Adjustment option in the Telephone Options menu on the
IP Phone. Any contrast changes you make on the IP Phone affect the
Expansion Module. The Expansion Module and IP Phone do not have
separate contrast adjustments.
The type of power supply to the phone controls what is functional on the
Expansion Module for IP Phone 1100 Series. The Expansion Module’s
backlight can only light when the local 48V power supply is present. On
the other hand, either local 48V power supply or Power over Ethernet
(PoE) to the phone will power all of the Expansion Module’s other
functionality.
For more information, see the section “Adjusting the screen display
contrast” in your IP Phone User Guide.

Setup and assembly
10
Setup and assembly
The Expansion Module mounts on the right side of the IP Phone. The
Expansion Module snaps into the Accessory Expansion Module (AEM) on
the back of the IP Phone using the desk-mount bracket and structural
baseplate supplied with the Expansion Module.