NRS Healthcare M39634 User manual

1
USER INSTRUCTIONS
MOBILITY CARE ALUMINIUM ROLLATOR
M39634 Mobility Care Aluminium Rollator
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in
a safe place for future reference.
Maximum User Weight
20st
127kg
1. INTENDED USE
The Aluminium Rollator is designed to provide support and assistance to those unable to, or who lack the
confidence to, walk without some level of support. The Rollator, which is intended for indoor or outdoor use,
also provides a seat to enable the user to rest whilst walking.
2. SAFETY
Warning: The maximum user weight must not be
more than 127Kg (20st).
Do not use the rollator on stairs or escalators and
take care on steep hills. Only use as a walking aid in
the forward direction.
Do not hang items from the handles as this will affect
the stability of the rollator.
Make sure the rollator is locked in the open position
before use. Do not adjust the rollator while in use.
Ensure the brakes are fully operational. Make sure
the rollator is locked in the open position before use.
Do not sit on the seat without locking the brakes first.
Do not use the seat without the backrest in place.
Do not use the seat to transport people or objects.
Loads should only be transported using the basket
supplied (maximum load 5kg).
Only use the supplied accessories.
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
3.1 Contents
1. Rollator Frame with braked handles x 1
2. Hand-wheel, Washers and Bolt x 2
3. Back Rest Bar x 1
4. Basket x 1
5. User Instructions x 1
4. ASSEMBLY
4.1 Unfolding the Rollator
Pull the frame outward, then lock the frame in place
by pushing the crossbar down until it locks in place
(refer to Section 5.1).
4.2 Attaching the Handles
Insert the handles and line up the holes.

2
Note: The handle height must be set up correctly for
the user height. Refer to Section 4.4.
Insert 1 x bolt, making sure the bolt head slots into
the hexagonal recess.
Note: The hand-wheel must always be on the
outside of the rollator frame.
Attach the hand-wheel and washer, then tighten fully
by turning clock-wise.
Repeat for the opposite side.
Note: Make sure both handles have been set to the
same height.
4.3 Fitting the Backrest
Insert the backrest into the slots on either side of the
rollator frame until the button clips click into place.
Note: Make sure both button clips have fully engaged
the holes.
4.4 Handle Height Adjustment
Adjust the rollator handle height so that when the
user’s arm is down to their side, the hand-grip is
at wrist height. This will ensure the arms are at an
approximate 20°-30° bend when using the rollator.
Undo and remove the hand-wheel by turning anti-
clockwise, then remove the bolt and washer.
Adjust the handle height to the required position,
then secure using the bolt, washer and hand-wheel.
Refer to Section 4.2.
Repeat for the opposite handle.
Note: Make sure both handles have been set to the
same height.
4.5 Fitting the Basket
Hook the basket over the front of the rollator frame in
the position shown.
Note: The maximum safe working load for the
basket is 5kg.

3
5. USING THE ROLLATOR
5.1 Unfolding the Rollator
Unfold the rollator and push down the cross bar fully
to lock into place. Fit basket in correct position (refer
to Section 4.5).
5.2 Folding the Rollator
Lift the seat and pull up on the strap until the rollator
closes.
Note: For more compact storage, remove the
backrest.
5.3 Brake Operation
To slow down or stop the rollator, pull both brake
handles up.
To apply the parking brake, push the brake handles
down until they lock into place.
Note: Make sure both brake handles have been
applied.
Pull both handles up to release the parking brakes.
Warning: If the brakes fail to stop or lock the wheels,
stop using the rollator immediately. Do not use the
rollator again until the brakes have been checked
and correctly adjusted. Refer to Section 5.4.
5.4 Brake Adjustment
Warning: The following section requires some
technical ability, do not attempt to carry out the
adjustment unless you are confident to do so.
Incorrectly adjusted brakes can lead to injury, please
contact your supplier if you require assistance.
A
B
Tighten the Brakes
Loosen the lock nut (A), turn the adjuster (B) anti-
clockwise, then re tighten the locknut.

4
NRS HEALTHCARE Sherwood House,
Cartwright Way, Forest Business Park, Bardon
Hill, Coalville, Leicestershire, LE67 1UB, UK.
NRS HEALTHCARE 4C Altona Road, Blaris
Industrial Estate, Lisburn, Co Antrim,
Northern Ireland BT27 5QB
Tel: Customer Services: 0345 121 8111 Email: [email protected]
NRS Healthcare is a leading supplier of community equipment and daily living aids.
Please visit one of our websites to view our full range of products:
www.healthcarepro.co.uk or www.completecareshop.co.uk
M39634-UI-5 07-06-2021
Note: There must be a gap of 2-3 mm between the
brake mechanism and the wheel, when the brake
lever is released.
C
D
To adjust the brakes using the mid-cable adjustor,
loosen lock nut (C), then turn the adjuster (D) anti-
clockwise to tighten the brake, then re-tighten the
lock-nut.
Test the brakes in accordance with Section 5.3.
Note: After making any adjustments to the brakes,
you must test them before the rollator is used.
Note: If adjustment does not tighten the brakes,
do not use the rollator. Contact your dealer or NRS
Customer services in the details below.
6. MAINTENANCE
Check both hand-wheels are secure.
Check all wheels can rotate freely.
Regularly check for wear and damage.Any suspected
faults or damage should be reported immediately to
your supplier and the product taken out of use.
Check brakes regularly in accordance with Section
5.4 before use.
7. CLEANING INSTRUCTIONS
Make sure that all dirt and debris is removed from
around the wheels, axle and brakes.
To clean the bag wipe with a damp cloth. Do not
machine wash.
Clean the frame regularly, using a general purpose,
neutral detergent and warm water.
Please check the suitability of the cleaning products
before use. Do not use abrasive cleaners or cloths
as these could permanently damage the surface and
invalidate any warranty.
Always allow the product to dry thoroughly prior to
use or storage.
8. PRODUCT DISPOSAL
This product must be thoroughly cleaned/sterilised
prior to disposal.
This product is manufactured from metal and plastic
and can be disposed of through Local Authority
Household Waste and Recycling Centres or through
Local Trade Waste Collectors.
9. PRODUCT GUARANTEE
NRS Healthcare guarantee this product for a period
of 12 months, from the date of purchase, against
faulty materials and workmanship.
This guarantee does not cover; fair wear & tear,
abuse, misuse, interference or tampering with any
part of the product.
Any guarantee issued by NRS Healthcare does not
affect your statutory rights.
If you have any problems with our products, please
contact us at the address below.
If you have experienced an injury, contact us but feel
free to contact the Medical and Healthcare products
Regulatory Agency at:
[email protected].uk