NXP Semiconductors LPC5536-EVK User manual

QUICK START GUIDE
LPC5536-EVK
Evaluation kit supports
LPC553x MCU
Arm
®
Cortex
®
-M33
150 MHz Arm
®
Cortex
®
-M33
Floating Point Unit (FPU) and Memory Protection Unit (MPU)
Up to 256 KB on-chip flash program memory
Up to 128 KB total SRAM
LPC5536-EVK

2
GET TO KNOW THE LPC5536-EVK
Figure 1: LPC5536-EVK Pin-Out
Audio In (J5)Audio In (J5)
Audio Out (J6)Audio Out (J6)
CAN (J19)CAN (J19)
SWD (J38)SWD (J38)
USB Target MCU (J3)USB Target MCU (J3)
USB External Supply (J2)USB External Supply (J2)
USB MCU-LINK (J1)USB MCU-LINK (J1)
Ext. Codec (J44)Ext. Codec (J44)
Reset (SW2)Reset (SW2)
User (SW3)User (SW3)
Wake-Up (SW1)Wake-Up (SW1)
Motor 2 +Motor 2 +
ArduinoArduino
UARTUART
(JP3)(JP3)
(J8)(J8) mikro BUSmikro BUS (J7)(J7) RGBRGB
LEDLED
J92J92
J122J122
J102J102
J182J182

3
GET TO KNOW THE LPC5536-EVK CONTINUED
Figure 2: LPC5536-EVK Pin-Out
J12J12
J9J9
J13J13
J10J10
Motor 1Motor 1
QUICK START GUIDE LPC5536-EVK

SUPPORT
Visit www.nxp.com/support for a list of phone
numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for complete
warranty information.
www.nxp.com/LPC553x
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. Arm and
Cortex are trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may
be protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved. © 2022 NXP B.V.
Document Number: LPC5536EVKQSG REV 0
Agile Number: 926-79041 Rev A
GET STARTED
Download installation software and
documentation at
www.nxp.com/LPC553x.
HOW TO GET STARTED
1. Connect the evaluation board to a PC using the included micro-USB
cable to USB connector J1. When the board is powered up, LED D5
turns ON.
2. The LPC5536-EVK board comes preprogrammed with a demo that will blink
each RGB LED three times. In addition, pressing SW1 will turn on the RED
LED and pressing SW3 will turn on the GREEN LED. Connecting a micro-
USB cable to J3 will enumerate a USB mouse device.
3. For more information on running the demo, access to additional
examples and to download software and tools, please visit:
www.nxp.com/LPC55S36-EVK/startnow.