OAKWORKS Halo Series User manual

USER MANUAL
www.OAKWORKS.com · 717.235.6807
OAKWORKS®
TROLLEYS
OAKWORKS Collection Trolleys
Halo Collection Trolleys

© Copyright 2021
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifica-
tions and the like documentation to
ensure accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequen-
tial damages in connection with or
arising out of the furnishing, per-
formance, or use of this document
and the program material which it
describes.

TABLE OF CONTENTS
Product Use Description.............................................................................................. 1
Important Safety Instructions
Symbol Identification ........................................................................................... 1
Important Safety Instructions............................................................................... 2
Product Description & Photo
Halo Collection
Halo Slimline - SL ....................................................................................... 3
Halo Standard - SX ..................................................................................... 4
Halo 1 Warming Drawer - W1...................................................................... 5
Halo 2 Warming Drawers - W2 .................................................................... 6
Oakworks Collection
Oakworks Slimline - SL ............................................................................... 7
Oakworks Standard - SX ............................................................................. 8
Oakworks 1 Warming Drawer - W1 ............................................................. 9
Oakworks 2 Warming Drawers - W2.......................................................... 10
Installation
Grounding ......................................................................................................... 11
Directions for Use
Adjustable Shelf Install...................................................................................... 12
Work Shelf Operation ........................................................................................ 12
Warming Drawer Operation ............................................................................... 12
Installation of Optional Hot Towel Cabi.............................................................. 13
Optional Work Light Install and Operation ......................................................... 14
Halo Collection Accent Lights Operation ........................................................... 15
Cleaning & Disinfection
Recommended Cleaners/Disinfectants .............................................................. 16
Cleaning Procedure........................................................................................... 16
Inspections ................................................................................................................ 17
Warranty Information ................................................................................................. 17
Model Number & Serial Number
Product Label Location...................................................................................... 17
Specifications
Environmental Conditions.................................................................................. 18
Electrical Specifications..................................................................................... 18
Halo Trolley Dimensions.................................................................................... 19
Oakworks Trolley Dimensions ........................................................................... 20
Contact Information ...................................................................................... back cover

PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
1
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an elec-
trical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
This symbol indicates that when the end-user wishes to discard this product, it must
be sent to separate collection facilities for recovery and recycling.
~
----
PRODUCT USE DESCRIPTION
The product is a spa trolley for commercial use. It is intended for indoor use.
The product is intended to be used by trained professionals in a controlled environment. A review
of the following Safety Instructions is important for the safety of the operator and patient. Read all
instructions and understand this entire user manual before using the product.
The trolley should not be used in any other manner than that described within this manual. Improper
use can result in injury.
SYMBOL IDENTIFICATION

2
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following:
DANGER
To reduce risk of electric shock:
1. Always unplug power strip from the electrical outlet before cleaning.
2. Connect power strip to a properly grounded outlet only. See Grounding Instructions in this manual.
Electrical Shock Hazard. The power strip is mounted on the back of the product.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug from outlet before adding or removing parts.
2. Never operate this product if it has a damaged cord, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Contact OAKWORKS® Inc., Customer Service before use at
717.235.6807.
3. Keep the cord away from heated surfaces.
4. Never drop or insert any object into any opening.
5. Do not use outdoors.
6. Do not operate where aerosol (spray) products are being used or where oxygen is being adminis-
tered.
7. Do not use attachments not recommended by the manufacturer.
8. To disconnect, turn all controls to the off position, then remove plug from outlet.
9. Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the product
is properly grounded.
10. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
11. Do not overload drawers. Failure to adhere to storage load capacity may lead to a potential tip-
ping hazard.
READ AND SAVE THESE INSTRUCTIONS

PRODUCT DESCRIPTION - HALO COLLECTION
Halo Slimline - SL
STANDARD SPECIFICATIONS
Storage
Top Drawer:
16.3” W x 13.8” D x 3” H Work Shelf Pull Out Surface: 17.9” W x 8” D
Bottom Drawer:
16.3” W x 13.8” D x 4.4” H Accent Lighting Color Changing LEDs
Moveable Four 2” Casters Power Supply Built in Power Strip
Push to Open Drawers One Touch Mechanism Adjustable Shelf 2 Positions
OPTIONS / ACCESSORIES
Towel Rack(s) Dimmable Work Light
Optional Storage Drawers
Storage Drawer: 16.3” W x 13.8” D x 4.4” H
Storage Load Capacity: 25 lbs.
Storage Drawer: 16.3” W x 13.8” D x 3” H
Storage Load Capacity: 25 lbs.
For electrical specs, see Specifications section.
3

4
For electrical specs, see Specifications section.
PRODUCT DESCRIPTION - HALO COLLECTION
Halo Standard - SX
STANDARD SPECIFICATIONS
Storage
Top Drawer:
21.8” W x 13.8” D x 3” H Work Shelf Pull Out Surface: 23.5” W x 8” D
Bottom Drawer:
21.8” W x 13.8” D x 4.4” H Accent Lighting Color Changing LEDs
Moveable Four 2” Casters Power Supply Built in Power Strip
Push to Open Drawers One Touch Mechanism Adjustable Shelf 2 Positions
OPTIONS / ACCESSORIES
Towel Rack(s) Dimmable Work Light
Storage Drawer: 21.8” W x 13.8” D x 4.4” H
Storage Load Capacity: 25 lbs.
Storage Drawer: 21.8” W x 13.8” D x 3” H
Storage Load Capacity: 25 lbs.
Optional Storage Drawers

PRODUCT DESCRIPTION - HALO COLLECTION
For electrical specs, see Specifications section.
5
Halo 1 Warming Drawer - W1
STANDARD SPECIFICATIONS
Storage
Top Drawer:
21.8” W x 13.8” D x 3” H Work Shelf Pull Out Surface: 23.5” W x 8” D
Bottom Drawer:
21.8” W x 13.8” D x 4.4” H Warming Drawer 17” W x 19” D x 3.75” H
Moveable Four 2” Casters Accent Lighting Color Changing LEDs
Push to Open Drawers One Touch Mechanism Power Supply Built in Power Strip
Shelf Removable
OPTIONS / ACCESSORIES
Towel Rack(s) Dimmable Work Light
Storage Drawer: 21.8” W x 13.8” D x 4.4” H
Storage Load Capacity: 25 lbs.
Storage Drawer: 21.8” W x 13.8” D x 3” H
Storage Load Capacity: 25 lbs.
Warming Drawer Capacity: 16L
Warming Drawer Inside Area: 17” W x 19” D x 3.75” H
(483mm x 432mm x 95mm)`
Optional Storage Drawers

PRODUCT DESCRIPTION - HALO COLLECTION
6
For electrical specs, see Specifications section.
Halo 2 Warming Drawers - W2
STANDARD SPECIFICATIONS
Storage
Top Drawer:
21.8” W x 13.8” D x 3” H Work Shelf Pull Out Surface: 23.5” W x 8” D
Bottom Drawer:
21.8” W x 13.8” D x 4.4” H Warming Drawer 17” W x 19” D x 3.75” H
Moveable Four 2” Casters Accent Lighting Color Changing LEDs
Push to Open Drawers One Touch Mechanism Power Supply Built in Power Strip
OPTIONS / ACCESSORIES
Towel Rack(s) Dimmable Work Light
Storage Drawer: 21.8” W x 13.8” D x 4.4” H
Storage Load Capacity: 25 lbs.
Warming Drawer Capacity: 16L
Warming Drawer Inside Area: 17” W x 19” D x 3.75” H
(483mm x 432mm x 95mm)`
Optional Storage Drawers

PRODUCT DESCRIPTION - OAKWORKS COLLECTION
Oakworks Slimline - SL
STANDARD SPECIFICATIONS
Storage
Top Drawer:
16.3” W x 13.8” D x 3” H Work Shelf Pull Out Surface: 17.9” W x 8” D
Bottom Drawer:
16.3” W x 13.8” D x 4.4” H Adjustable Shelf 2 Positions
Moveable Four 2” Casters Power Supply Built in Power Strip
Push to Open Drawers One Touch Mechanism
OPTIONS / ACCESSORIES
Towel Rack(s) Dimmable Work Light
Storage Drawer: 16.3” W x 13.8” D x 4.4” H
Storage Load Capacity: 25 lbs.
Storage Drawer: 16.3” W x 13.8” D x 3” H
Storage Load Capacity: 25 lbs.
For electrical specs, see Specifications section.
7
Optional Storage Drawers