OAKWORKS Clinician Premiere Series User manual

Clinician Premiere
USER MANUAL
www.OAKWORKS.com · 717.235.6807
made in the USA
with US & imported parts
4-Section Electric Salon Top
Shown with optional Adjustable
Breast Comfort System
1-Section Flat Top
Shown with optional Adjustable
Breast Comfort System

© Copyright 2020
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifica-
tions and the like documentation to
ensure accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequen-
tial damages in connection with or
arising out of the furnishing, per-
formance, or use of this document
and the program material which it
describes.

TABLE OF CONTENTS
Product Use Description......................................................................................................... 1
Important Safety Instructions
Symbol Identification ..................................................................................................... 1
Safety Instructions ......................................................................................................1-2
Product Description & Photo
4-Section Electric Salon ................................................................................................ 3
1-Section Flat Top ......................................................................................................... 4
Troubleshooting
If the Table Will Not Change Height or Position ........................................................... 5
If the Table is Making Noise During Height Adjustment ............................................... 5
Installation
Grounding...................................................................................................................... 6
Storage Cabinet & In-Cabinet Outlet............................................................................. 7
Important Safety Note ................................................................................................... 7
Directions for Use
Hydraulic Daily Cycling.................................................................................................. 8
Key Lock Use ................................................................................................................ 8
Foot Control Operations
Flat Top Tables..................................................................................................... 9
Electric Salon Tables .......................................................................................... 10
Adjustable Breast Comfort (ABC) Systems Only ............................................... 11
Hand Control Operations
Flat Top Tables................................................................................................... 12
Electric Salon Tables .......................................................................................... 13
Adjustable Breast Comfort (ABC) Systems Only ............................................... 14
Moving the Table......................................................................................................... 15
Leveling the Table ....................................................................................................... 15
Adjustable Breast Comfort (ABC) System .................................................................. 16
QuickLock Face Rest .................................................................................................. 17
Integrated Heated Top ................................................................................................ 18
Integrated Heated Top Troubleshooting...................................................................... 19
Cleaning & Disinfection
Recommended Cleaners/Disinfectants ....................................................................... 20
Cleaning Process ........................................................................................................ 21
Inspections & Maintenance .................................................................................................. 21
Warranty Information............................................................................................................ 21
Model Number & Serial Number .......................................................................................... 22
Specifications
Electrical Specifications............................................................................................... 23
Environmental Conditions............................................................................................ 23
Dimensions.................................................................................................................. 23
Contact Information .................................................................................................back cover

This symbol, when used in this manual and on product labels, represents a caution warn-
ing. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electrical
shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of manu-
facture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current (DC).
This symbol is used to indicate that the operator should consult the user manual.
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
~
----
PRODUCT USE DESCRIPTION
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
1
The Oakworks Clinician Premiere offers a variety of positioning capabilities for massage therapists and spa
professionals of all specialties. On these multifunctional professional tables the practitioner can perform
numerous protocols with ease and comfort. The Clinician Premiere is especially effective when professional
protocols require specific positioning for the client. While the client receives comfortable, relaxing support,
the comfort level of the therapeutic professional is enhanced by superior ergonomics.
It is intended to be operated by Massage Therapists in a professional environment. No special training
is required but a review of the following Safety Instructions is important for the safety of the operator and
client. The massage professional should read and understand this entire manual before use with a client.
There are no known contraindications to the use of this equipment.
The Clinician Premiere should not be used in any other manner than that described within this manual. Use
of any unnecessary force or unauthorized procedures could result in injury to practitioner, client or
equipment.

The Table is designed to be a stand-alone table. This table must not be modified or incorporated into any
other equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is
the responsibility of the operator of this equipment to ensure that bystanders are not in the area below or
around this equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, client, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
Weight Limit: (client and accessories) 500 lbs. (227 kg) Do not exceed.
Adjustable Breast Comfort (ABC) System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
Do not place foreign objects into the ABC System. Only use as intended. For safety of your client, use a
cloth sheet between the ABC System and your client.
Be certain that the table is completely lowered without any tilt being present prior to discharging an
ambulatory client. The client may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc)
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at
717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding
Instructions in this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user
serviceable parts are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with
any cables connected to the power supply.
2
IMPORTANT SAFETY INSTRUCTIONS

Clinician Premiere
4-Section Electric Salon
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 26”-36” (66-91 cm.) Height Range
Motion 2 Powered 0-70º Backrest
Motion 3 Powered 0-30º Foot Rest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 120V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*190 lbs. (86 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
Cabinet Door Material & Style
ACCESSORIES
QuickLock Face Pad
Table Extender - 12” (30.5 cm.) Long
Lowered Arm Rest
Side Arm Rests
3
Optional ABC Pad

Clinician Premiere
1-Section Flat Top
PRODUCT DESCRIPTION
STANDARD SPECIFICATIONS
Motion 1 Powered 26”-36” (66-91 cm.) Height Range
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 120V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*170 lbs. (77 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
Cabinet Door Material & Style
ACCESSORIES
QuickLock Face Pad
Table Extender - 12” (30.5 cm.) Long
Lowered Arm Rest
4
Optional ABC Pad

TROUBLESHOOTING
IF THE TABLE WILL NOT CHANGE HEIGHT OR POSITION
• Check that the keyswitch inside the table is in the “on” position.
• Check the outlet to be sure that it has power and that the power cable is plugged in. Try all Foot
Control Buttons to see if any work. If any work, then possibly there is a loose connection or a faulty
controller.
• Unplug the power cable from the wall outlet.
• Make sure that all male and female connectors are firmly pushed into each other. Even a slight
disconnection can cause a possible malfunction.
• Plug the unit back into the wall and check the controls again. If one or more of the controls still do not
work, contact Customer Service at 717-235-6807 to arrange replacement.
IF THE TABLE IS MAKING NOISE DURING HEIGHT ADJUSTMENT
CAUTION
Disconnect the power cord from the power outlet before doing any work on the
unit. The table weighs as much as 190 lbs. (86 kg.) DO NOT lift or move the unit
without using proper safety procedures or equipment.
If you hear squealing or a pop during the height adjustment, this may be related to lack of lubrication in the
hydraulic cylinders. It is recommended that you immediately cycle the table fully up/down at least four times.
If this does not work, then let the motor cool down for at least 30 minutes and repeat the procedure. The
table should return to its normal quiet mode.
5

All tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated
for the table. (see Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard and where the con-
trols are located to your liking and are conveniently accessible.
Be sure access to plug is not blocked for disconnecting the table from power.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding pin. The pin must be plugged into an appropri-
ate outlet that is properly installed and grounded in accordance with all local codes and ordinances. See
U.S. sample below.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER

INSTALLATION
GROUNDING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
Grounding Methods
6

INSTALLATION
STORAGE CABINET & IN-CABINET OUTLET
󰀨
cabinets or other accessories. This allows you to store the unit inside with no excess cords to get in the way
while also storing stacks of towels in the rest of the cabinet. With it plugged in, your towels stay warm and
within easy reach, yet are still out of the way.
Note: Power strip located on the
head end of the table
Head and foot end panels are
removable for accessories.
*Head end not removable if the
table has integrated heat.
This product is equipped with an interior 120-volt 60Hz six plug accessory outlet.
The total electrical load of equipment plugged into this set of outlets is not to
󰀨
DANGER
The cabinet hood area under the backrest top is not designed
for storage or as an area to hold accessories while with a client.
DO NOT use this area for holding anything. Placing anything on
this area is prohibiting movement of the backrest and can cause
damage to the table or the object. Using this area as storage
will void the warranty.
Not for Storage!
IMPORTANT SAFETY NOTE
7

DIRECTIONS FOR USE
KEY LOCK USE
WARNING To reduce the risk of burns, fire, electric shock or injury to persons:
- Remove key lock when not in use, and store out of reach of children.
A table key lock is located inside the cabinet on the shelf at the head end of the table. This key lock will
lock out the table and prevent all motions. It should be used to prevent unauthorized use. Remove the key
when not in use, and store out of reach of children.
HYDRAULIC DAILY CYCLING
The Clinician Premiere uses hydraulics and hydraulic fluids to adjust the table height. Maintaining the quiet
operation of your table requires that you fully cycle your table (up & down) twice per day. Cycling of the
table will maintain the lubrication within the hydraulic cylinders for continued smooth and quiet operation.
When not possible, we recommend that you cycle the table (up & down) four times at least once per week.
8

The O®Clinician Premiere Flat Top tables offer height positioning with electronic ease. Operate
the foot control as shown below to raise or lower the height of the table.
DIRECTIONS FOR USE
FOOT CONTROL OPERATIONS - FLAT TOP TABLES
DOWNUP
FOOT CONTROL OPERATION
9

CAUTION
FOOT CONTROL OPERATIONS - ELECTRIC SALON TABLES
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
The O®Clinician Premiere Electric Salon Tables offer height, backrest and footrest positioning
with electronic ease. Operate the foot control as shown below to raise or lower the height, backrest or
footrest functions of the table.
DIRECTIONS FOR USE
Backrest Down
Backrest Up
Height Down
Height Up
Footrest Down
Footrest Up
10

DIRECTIONS FOR USE
CAUTION
FOOT CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the
ABC System. Only use as intended. For safety of your client, use a cloth sheet
between the ABC System and your client.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the foot control.
FLAT TOP TABLES ONLY
ELECTRIC SALON TABLES ONLY
ABC System
UP
ABC System
DOWN
ABC System
UP
ABC System
DOWN
ABC SYSTEM UP ABC SYSTEM DOWN
11

The O®Clinician Premiere Flat Top tables offer height positioning with electronic ease. Operate
the hand control as shown below to raise or lower the height of the table.
DIRECTIONS FOR USE
HAND CONTROL OPERATIONS - FLAT TOP TABLES
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
DOWNUP
HAND CONTROL OPERATION
12

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS - ELECTRIC SALON ONLY
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
The O®Clinician Premiere Electric Salon Tables offer height, backrest, and footrest positioning
with electronic ease. Operate the hand control as shown below to raise or lower the height, backrest or
footrest functions of the table.
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Backrest
DOWN
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Backrest
UP
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Height
UP
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Height
DOWN
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Footrest
UP
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Footrest
DOWN
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
13

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the
ABC System. Only use as intended. For safety of your client, use a cloth sheet
between the ABC System and your client.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the hand control.
ABC SYSTEM UP ABC SYSTEM DOWN
P/N: 71567-1 P/N: 71569-1
Clear Window
Blue PMS #283C
P/N: 71568-1 P/N: 71567-2 P/N: 71569-2
P/N: 71567-1 P/N: 71569-1
Clear Window
Blue PMS #283C
P/N: 71568-1 P/N: 71567-2 P/N: 71569-2
ELECTRIC SALON
TABLES ONLY
FLAT TOP
TABLES ONLY
ABC System
UP
ABC System
DOWN
ABC System
UP
Standard Table
Functions
ABC System
DOWN
14

When moving the table, place one person at each corner of the table. Have each person firmly grasp the
table top. When moving any piece of heavy equipment, bend at the knee and lift with your legs and not with
your back. Be aware and use proper, safe procedures for moving a table of this size to prevent injury to
yourself or damage to the table. We strongly recommend that a flatbed dolly that can hold the entire table
be used if moving the table involves any large distance.
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. Secure the
power cord and any hand or foot controls before moving. The table weighs as much
as 190 lbs. (86 kg.) Four people are required to move the table safely. Do not use the
table to transport a client.
DIRECTIONS FOR USE
Position at low height
TABLE LEVELING INSTRUCTIONS
1. Place the table in the location where you plan to use it.
2. Rock the table to determine if it is level with the floor. If
the table rocks back and forth at all, the foot that clears the
floor when you rock the table will need adjustment.
3. Adjust the Leveler Foot by first loosening the locking
nut found just above the rubber Leveler Foot with the 1/2”
open-end wrench.
4. Lower the adjustable rubber Leveler Foot until it meets
the floor snugly. Tighten the locking nut against the leg of
the table with the 1/2” open-end wrench to fix the Leveler
Foot in position.
5. Rock the table again to be sure adjustments have
stabilized the table. If necessary make any additional
adjustments in the same way.
15

DIRECTIONS FOR USE
ADJUSTABLE BREAST COMFORT (ABC) SYSTEM USE
SUPINE POSITIONING
When turning clients over to supine, you
may use the cushion to level after or
during their change of position. IT is not
important that the cushion be completely
level. As in prone positions, make small
changes in height and check in with the
client.
PRONE POSITIONING
In Prone positions, for male or female
clients when the face rest is in use, lower
the cushion approximately 3/4” at a time
(This is approximately 1 second of lower-
ing) and check in with the client regard-
ing their comfort right after making the
change. Incrementally lower the cushion
until the client reports they are comfort-
able. Sometimes going back up a little will
be preferred. This whole process takes no
more than 15-20 seconds. After lowering,
check headrest position to ensure comfort
& support. Once a client’s preferences are
known, the cushion can be brought to that
level before they are on the table. NOTE:
Breast size is not the only determinate of
cushion location. Every person’s comfort
spot is different, regardless of breast size.
HEAD REST USE IN SUPINE
If you are using the head rest in the
Supine position, you may use the cush-
ion at relatively high heights to facilitate
stretching for short periods of time. It is not
recommended that clients experience this
position for more than a few minutes.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts and pectoral
muscles, allowing the client to relax and create a more comfortable position for their spine. The height of the cushion is
easily adjusted up and down in small increments by using the hand control. We recommend that the cushion height be
adjusted in the following ways:
*Always start with the cushion top level with the top of the table for Prone or Supine Positioning*
CAUTION ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the
ABC System. Only use as intended. For safety of your client, use a cloth sheet
between the ABC System and your client.
16

Double articulating action provides nearly limitless positioning options
with the QuickLock™Face Rest. The adjustable pad takes pressure off
sensitive facial areas while providing superb support. The QuickLock™
Face Rest can be used in both prone and supine positioning and folds out
of the way when not in use. Adjustments are made easily by loosening
the cam locks, adjusting for height and angle and then locking locks into
that position. The table has a bracket at the head of the table for a variety
of uses.
* U.S. Patent #5,177,823
3”
• Do not put excessive weight or pressure on the Face Rest.
• Excessive pressure can cause premature failure of the Face Rest.
CAUTION
Attaching the QuickLock™Face Rest:
When attaching the QuickLock™Face Rest, slide the frame dowels into the bracket until bullet catches
are snapped into place.
To remove the QuickLock™Face Rest, gently pull the headrest by the dowels until it comes free. Set it
safely aside or store it inside the under-table cabinet until needed.
DIRECTIONS FOR USE
QuickLockTM FACE REST: (ACCESSORY OPTION)
To use the face rest with your clients supine,
rotate the face rest pad so that the thick part of
the pad supports your client’s cervical region.
Adjusting the height and angle of the face rest
gives your clients perfectly comfortable support.
The face pad is flexible so that you can bring
the open ends together or spread them apart to
achieve the most comfortable support for any
size face. To avoid your client’s chin from
hitting the spacebar, make sure the pad is narrow
enough to support their whole face.
For appropriate cervical flexion, use the cam
locks to adjust the downward angle of the face
rest, making sure that the surface of the face rest
pad at the chin is not lower than the surface of
the table.
Tips for Great Positioning using the QuickLock™ Face Rest:
Pull by dowels
Pull by dowels
To remove
17