OAKWORKS PerformaLift Series User manual

PerformaLift™
4-Section Electric Salon Top
Shown with optional Adjustable
Breast Comfort System
2-Section Lift-Assist Backrest Top
Shown with optional Adjustable
Breast Comfort System
Series
USER MANUAL
www.OAKWORKS.com · 717.235.6807
made in the USA
with US & imported parts
1-Section Flat Top
Shown with optional Adjustable
Breast Comfort System

© Copyright 2020
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical
specifications and the like
documentation to ensure accuracy.
The appropriate documentation is
available upon request.
OAKWORKS®, Inc. shall not be
liable for incidental or
consequential damages in
connection with or arising out of
the furnishing, performance, or use
of this document and the program
material which it describes.

TABLE OF CONTENTS
Product Use Description......................................................................................................... 1
Important Safety Instructions
Symbol Identification ..................................................................................................... 1
Safety Instructions ......................................................................................................1-2
Product Description & Photo
4-Section Electric Salon ................................................................................................ 3
2-Section Lift-Assist Backrest........................................................................................ 4
1-Section Flat Top ......................................................................................................... 5
Installation
Grounding...................................................................................................................... 6
Directions for Use
Foot Control Operations
Electric Salon Tables Only ................................................................................... 7
Lift-Assist Backrest & Flat Top Tables Only ......................................................... 8
Adjustable Breast Comfort (ABC) Systems Only ................................................. 9
Hand Control Operations
Electric Salon Tables Only ................................................................................. 10
Lift-Assist Backrest & Flat Top Tables Only ....................................................... 11
Adjustable Breast Comfort (ABC) Systems Only ............................................... 12
Moving the Table......................................................................................................... 13
Leveling the Table ....................................................................................................... 13
Adjustable Breast Comfort (ABC) System .................................................................. 14
QuickLock Face Rest .................................................................................................. 15
Integrated Heated Top ................................................................................................ 16
Integrated Heated Top Troubleshooting...................................................................... 16
Lift-Assist Backrest Adjustment................................................................................... 17
Locking Casters Use ................................................................................................... 17
Table Reset Procedure - Hand Control....................................................................... 18
Table Reset Procedure - Foot Control ........................................................................ 18
Set Zero Height ........................................................................................................... 19
Cleaning & Disinfection
Recommended Cleaners/Disinfectants ....................................................................... 20
Cleaning Process ........................................................................................................ 21
Inspections & Maintenance .................................................................................................. 21
Warranty Information............................................................................................................ 21
Model Number & Serial Number .......................................................................................... 22
Specifications
Environmental Conditions............................................................................................ 23
Electrical Specifications............................................................................................... 23
Contact Information .................................................................................................back cover

This symbol, when used in this manual and on product labels, represents a caution warn-
ing. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electrical
shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of manu-
facture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current (DC).
This symbol is used to indicate that the operator should consult the user manual.
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
~
----
PRODUCT USE DESCRIPTION
Oakworks PerformaliftTM Series offers a variety of positioning capabilities for massage therapists and spa
professionals of all specialties. On these multifunctional professional tables the practitioner can perform
numerous protocols with ease and comfort. The fully electric Performalift Series is especially effective when
professional protocols require specific positioning for the client or patient. While the client receives
comfortable, relaxing support, the comfort level of the therapeutic professional is enhanced by superior
ergonomics.
It is intended to be operated by Massage Therapists in a professional environment. No special training
is required but a review of the following Safety Instructions is important for the safety of the operator and
patient. The massage professional should read and understand this entire manual before use with a client.
There are no known contraindications to the use of this equipment.
The Performalift Series should not be used in any other manner than that described within this manual.
Use of any unnecessary force or unauthorized procedures could result in injury to practitioner, client or
equipment.
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.
The Table should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is
necessary, the table should be observed to verify normal operation in the configuration in which it will be used.
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY
INSTRUCTIONS
1

The Table is designed to be a stand-alone table. This table must not be modified or incorporated into any other
equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is the
responsibility of the operator of this equipment to insure that bystanders are not in the area below or around this
equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, patient, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
Weight Limit: (patient and accessories) 550 lbs. (250 kg) Do not exceed.
Adjustable Breast Comfort (ABC) System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
Do not place foreign objects into the ABC System. Only use as intended. For safety of your client, use a
cloth sheet between the ABC System and your client.
Be certain that the table is completely lowered without any tilt being present prior to
discharging an ambulatory patient. The patient may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc)
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at 717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in
this manual.
Electrical Shock Hazard. The power supply/control module is located on the lift frame. No user serviceable parts
are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables connected to
the power supply.
2
IMPORTANT SAFETY INSTRUCTIONS

PerformaLift™
4-Section Electric Salon
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 21”-37” (54-94 cm.) Height Range
Motion 2 Powered ±15º Trendelenburg/ Reverse
Trendelenburg
Motion 3 Powered 0-70º Backrest
Motion 4 Powered 0-30º Foot Rest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length - 4 section 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*250 lbs. (113 kg.)
OPTIONS
Adjustable Breast Comfort System
Wood Finishes
Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Pad
Table Extender - 12” (30.5 cm.) Long
Lowered Arm Rest
3
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch

PerformaLift™
2-Section Lift-Assist Backrest
4
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 21”-37” (54-94 cm.) Height Range
Motion 2 Powered ±15º Trendelenburg/ Reverse
Trendelenburg
Motion 3 Manual 0-80º Backrest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length - 2 section 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*230 lbs. (104 kg.)
OPTIONS
Adjustable Breast Comfort System
Wood Finishes
Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Pad
Table Extender - 12” (30.5 cm.) Long
Lowered Arm Rest
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch

PerformaLift™
1-Section Flat Top
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 21”-37” (50-90 cm.) Height Range
Motion 2 Powered ±15º Trendelenburg/ Reverse
Trendelenburg
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length - 2 section 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight*230 lbs. (104 kg.)
OPTIONS
Adjustable Breast Comfort System

Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Pad
Table Extender - 12” (30.5 cm.) Long
Lowered Arm Rest
5
Optional ABC Pad
Optional Integrated
Heated Top Control
Switch

6
All tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated
for the table. (see Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard and where the
controls are located to your liking and are conveniently accessible.
Be sure access to plug is not blocked for disconnecting the table from power.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding pin. The pin must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances. See U.S. sample below.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER

INSTALLATION
GROUNDING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
Grounding Methods

CAUTION
FOOT CONTROL OPERATIONS - ELECTRIC SALON TABLES ONLY
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
The O®PerformaliftTM Electric Salon Tables offer trendelenburg, height, backrest and footrest
positioning with electronic ease. Operate the foot control as shown below to raise or lower the trendelen-
burg, height, backrest or footrest functions of the table.
DIRECTIONS FOR USE
Height Down
Head End Down
Head End Up
Backrest Down Footrest Down
Backrest Up Footrest Up
Height Up
7

8
CAUTION For Lift-Assist Backrest Tables; Do not sit on backrest section. The hood area under the backrest top
is not designed for storage. DO NOT use this area for holding anything. Damage can occur to the
table.
The O®PerformaliftTM Lift-Assist Backrest and Flat Top tables offer trendelenburg and height
positioning with electronic ease. Operate the foot control as shown below to raise or lower the
trendelenburg and height functions of the table.
DIRECTIONS FOR USE
FOOT CONTROL OPERATIONS -
LIFT-ASSIST BACKREST & FLAT TOP TABLES ONLY
Head End Down
Head End Up
Height Down
Height Up

DIRECTIONS FOR USE
CAUTION
FOOT CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the
ABC System. Only use as intended. For safety of your client, use a cloth sheet
between the ABC System and your client.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the foot control.
ABC SYSTEM UP ABC SYSTEM DOWN
FLAT TOP, LIFT-ASSIST BACKREST TABLES ONLY
ELECTRIC SALON TABLES ONLY
ABC System
UP
ABC System
DOWN
ABC System
UP
ABC System
DOWN
9

10
DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS - ELECTRIC SALON ONLY
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
The O®PerformaliftTM Electric Salon Tables offer trendelenburg, height, backrest, and footrest
positioning with electronic ease. Operate the hand control as shown below to raise or lower the trendelen-
burg, height, backrest or footrest functions of the table.
MEM1 MEM2
Use any of the top 8 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
button.
MEMORY FUNCTION USE
Backrest Up Backrest Down
Memory 1 Function Memory 2 Function
Zero Gravity PositionFully Flat/Fully Down
Footrest Up Footrest Down
Head End Up Head End Down
Height Up Height Down

DIRECTIONS FOR USE
HAND CONTROL OPERATIONS -
LIFT-ASSIST BACKREST & FLAT TOP TABLES ONLY
Use any of the top 4 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
button.
MEMORY FUNCTION USE
MEM1 MEM2
CAUTION For Lift-Assist Backrest Tables; Do not sit on backrest section. The hood area under the backrest top
is not designed for storage. DO NOT use this area for holding anything. Damage can occur to the
table.
The O®PerformaliftTM Lift-Assist Backrest and Flat Top tables offer trendelenburg and height
positioning with electronic ease. Operate the hand control as shown below to raise or lower the
trendelenburg and height functions of the table.
Height DownHeight Down
Head End Up Head End Down
Height Up Height Down
11

MEM1 MEM2
ABC ABC
MEM1 MEM2
ABC ABC
12
DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
ADJUSTABLE BREAST COMFORT (ABC) SYSTEMS ONLY
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the
ABC System. Only use as intended. For safety of your client, use a cloth sheet
between the ABC System and your client.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the hand control.
ELECTRIC SALON
TABLES ONLY
FLAT TOP, LIFT-ASSIST
BACKREST TABLES ONLY
ABC SYSTEM UP ABC SYSTEM DOWN
ABC System
UP
ABC System
DOWN
ABC System
DOWN
ABC System
UP
Standard Table
Functions
Standard Table
Functions

When moving the table, place one person at each corner of the table. Have each person firmly grasp the
base at the bottom and lift the table. Be aware and use proper, safe procedures for moving a table of this
size to prevent injury to yourself or the table. We strongly recommend that a flatbed dolly be used that can
hold the entire table when moving the table long distances.
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. The table
weighs as much as 250 lbs. (113 kg.) Never lift the table by grasping the table top.
You could damage the table and the electronics that run the tabletop. Four people
are required to move the table safely. Do not use the table to transport a patient.
DIRECTIONS FOR USE
Grasp at
base corner
at low height range
1/2” (13mm) Open
end Wrench
Leveler Foot
1. Place the table in the location where
you plan to use it.
2. Rock the table to determine if it is
level with the floor. If the table rocks
back and forth at all, the foot that clears
the floor when you rock the table will
need
adjustment.
3. Adjust the Leveler Foot by first
loosening the locking nut found just
above the rubber Leveler Foot with the
open-end wrench.
4. Lower the adjustable rubber Leveler
Foot until it meets the floor snugly.
Tighten the locking nut against the
wooden leg of the table with the open-
end wrench to fix the Leveler Foot in
position.
5. Rock the table again to be sure
adjustments have stabilized the table.
If necessary make any additional
adjustments in the same way.
Tighten Locking NutLocking Nut
LEVELING THE TABLE
13

14
DIRECTIONS FOR USE
ADJUSTABLE BREAST COMFORT (ABC) SYSTEM USE
CAUTION ABC System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System. Do
not place foreign objects into the ABC System. Only use as intended. For safety
of your client, use a cloth sheet between the ABC System and your client.
SUPINE POSITIONING
When turning clients over to supine, you
may use the cushion to level after or
during their change of position. IT is not
important that the cushion be completely
level. As in prone positions, make small
changes in height and check in with the
client.
PRONE POSITIONING
In Prone positions, for male or female
clients when the face rest is in use, lower
the cushion approximately 3/4” at a time
(This is approximately 1 second of lower-
ing) and check in with the client regard-
ing their comfort right after making the
change. Incrementally lower the cushion
until the client reports they are comfort-
able. Sometimes going back up a little will
be preferred. This whole process takes no
more than 15-20 seconds. After lowering,
check headrest position to ensure comfort
& support. Once a client’s preferences are
known, the cushion can be brought to that
level before they are on the table. NOTE:
Breast size is not the only determinate of
cushion location. Every person’s comfort
spot is different, regardless of breast size.
HEAD REST USE IN SUPINE
If you are using the head rest in the
Supine position, you may use the cush-
ion at relatively high heights to facilitate
stretching for short periods of time. It is not
recommended that clients experience this
position for more than a few minutes.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts and pectoral
muscles, allowing the client to relax and create a more comfortable position for their spine. The height of the cushion is
easily adjusted up and down in small increments by using the hand control. We recommend that the cushion height be
adjusted in the following ways:
*Always start with the cushion top level with the top of the table for Prone or Supine Positioning*

Double articulating action provides nearly limitless positioning options
with the QuickLock™Face Rest. The adjustable pad takes pressure off
sensitive facial areas while providing superb support. The QuickLock™
Face Rest can be used in both prone and supine positioning and folds out
of the way when not in use. Adjustments are made easily by loosening
the cam locks, adjusting for height and angle and then locking locks into
that position. The table has a bracket at the head of the table for a variety
of uses.
* U.S. Patent #5,177,823
3”
• Do not put excessive weight or pressure on the Face Rest.
• Excessive pressure can cause premature failure of the Face Rest.
CAUTION
Attaching the QuickLock™Face Rest:
When attaching the QuickLock™Face Rest, slide the frame dowels into the bracket until bullet catches
are snapped into place.
To remove the QuickLock™Face Rest, gently pull the headrest by the dowels until it comes free. Set it
safely aside or store it inside the under-table cabinet until needed.
DIRECTIONS FOR USE
QuickLockTM FACE REST: (ACCESSORY OPTION)
To use the face rest with your clients supine,
rotate the face rest pad so that the thick part of
the pad supports your client’s cervical region.
Adjusting the height and angle of the face rest
gives your clients perfectly comfortable support.
The face pad is flexible so that you can bring
the open ends together or spread them apart to
achieve the most comfortable support for any
size face. To avoid your client’s chin from
hitting the spacebar, make sure the pad is narrow
enough to support their whole face.
For appropriate cervical flexion, use the cam
locks to adjust the downward angle of the face
rest, making sure that the surface of the face rest
pad at the chin is not lower than the surface of
the table.
Tips for Great Positioning using the QuickLock™ Face Rest:
Pull by dowels
Pull by dowels
To remove
15

Heat is not
functioning
2 & 3 blinking
lights
Integrated heat level indicator
DIRECTIONS FOR USE
OPTIONAL INTEGRATED HEATED TOP
INTEGRATED HEATED TOP TROUBLESHOOTING
Heating element locations
Possible causes-
• Plug is not properly plugged in.
• Wall outlet isn’t working properly.
• Damaged wires & terminals.
Solutions-
• Ensure that the all power cords are properly plugged into a standard 120V or 230V wall outlet.
• Ensure heating element connectors (2) are properly connected to the control box.
• Check light indicators on the front of the unit to ensure power is supplied. If the indicator is not
illuminated after pressing it once try plugging the table into another outlet.
Possible causes-
• Two & three blinking lights on the control switch indicates that the heating element connector(s) are not
plugged in properly and/or damage to the terminals and/or connectors has occured.
Solutions-
• Disconnect power supply to the control box (located on the underside of the table top) and wall plug.
Disconnect all heating element connectors from the control box. Reconnect the heating element
connectors first then plug the power cord into the wall outlet.
• If problems continue contact Customer Service at 717-235-6807.
USING THE INTEGRATED HEATED TOP:
The table comes with the option for a fully integrated heated top pad. Simply press the heating indicator
located on the right side rail of the table to the desired heat level.
16
Low Medium High

DIRECTIONS FOR USE
TO RAISE THE BACK REST
Raise the back rest by pressing the lever
under the head section and lifting up to
the desired height. It is recommended that
clients take some of their weight off the
back rest while you lift.
CAUTION
LIFT-ASSIST BACKREST ADJUSTMENT
Do not sit on the backrest section.
All casters should be locked during use with a patient.
LOCKING CASTERS USE
LOCKING THE CASTERS
1. Place your foot on the end of the casters locking tab.
2. Press firmly downward until you hear a clicking noise
and the caster is locked.
UN-LOCKING THE CASTERS
1. Place your foot on top of the casters locking tab.
2. Press firmly inward and downward until you hear a
clicking noise and the caster is unlocked.
17
TO LOWER THE BACK REST:
Press the lever under the head section and
push the back rest down.