Océ TCS400 specifications
Mechanical speed • Max 8 ips
Scanning width • Max. 40"
Original thickness • Max. 0.60 inch
Original feed • Face down
Original out • Rewind and hold
• Feed and release
• Feed and hold
Original delivery • Slide, front accessible
• Optional: original delivery rack at the back
Dimensions • 42" (h) › 53" (w) › 20" (d)
Electrical • 100/120/230 Volt 50/60 Hz
requirements
Power consumption • Sleepmode: 45 W
• Stand-by: 135 W
• Run: 135W
Warm up time • From sleep mode: about 6 min.
• From cold start (timer controllable) about
6 min.
Weight • 232 lbs.
Safety approvals • CE Compliance, TÜV-GS (IEC60950),
UL, CB compliance with EN60950, EMC
Compliance
Océ Power Logic®Controller hardware
Platform • Océ controller with embedded
Windows XP
Memory • 512 MB, expandable to 1024 MB with copy
and scan-to-file modules
Hard disk capacity • 80 GB maximum
Graphic User Interface • Optional: keyboard, mouse and monitor
(mandatory with scan-to-file module)
Power consumption • Controller < 75 W
• Monitor 200 W
Electrical • 120/230 V, 50/60 Hz
requirements
Standard interface • RJ45
Network • Ethernet 10/100baseT
Network protocol • TCP/IP, IPX/SPX
Printing protocol • LPR/LPD/LPQ/LPRM, Pserver (Novell)
3.x/4.x/5.x, FTP
Océ Power Logic Controller software
Core module
• File spooling on the controller
• Concurrent receiving/processing/
printing/copying/scanning
• Océ Setting Editor
• Océ System Control Panel
• Océ Advanced Queue Manager
Optional • Océ Account Logging
Print module
Print processing • Print Optimization Kernel
technology
Printer transfer curves • Standard inclusive ink reduction
Color modes • B&W/Grayscale, Color
Quality modes • Check, Release, Presentation
Content modes • Text & Lines, Area fills
Language sensing • Automatic
Standard file formats • Vector: HPGL, HPGL/2, Calcomp
• Raster: HP-RTL, TIFF 6.0, CALS, C4,
NIRS/NIFF
Optional • Adobe PS3/PDF-printing
Number of prints • 1–999, send once, process once, print many
Roll selection and • Manual, Automatic
switching
Plot manipulation • Rotation, auto-scaling, positioning
• Pen management
• Leading and trailing strip adjustment
(add or remove up to 16 inches), horizontal
mirroring
Cut length • Standard, synchro or user defined
Supported media • DIN, ANSI, ARCHI
formats
Copy module
Copy processing • Océ Image Logic®Color
technology
Color management • Based on OMP-profiles
Number of copies • 1–99
• Set Memory: scan once, process once,
print many
Original handling • Manual or automatic size detection
• Automatic Deskewing
Job settings • Programmable default setting
• 5 programmable templates—standard
• Pre-programming of the next copy
• Single sheet or multiple sheet/set
• Priority setting on job level
• Start printing while scanning
Copy color modes • Grayscale, color, blueprint
Copy quality modes • Check, release, presentation
• Automatic resolution optimization
Copy content modes • Text & lines, Area fills
Copy image types • Line art, Photo, Maps, Artwork
Exposure control • Manual fine adjustment
• Automatic background compensation
(on/off)
