Ogawa OG7500 User manual

OG7500
OG7500

Ogawa OG7500.
Ogawa
Assembly Instructions
The OG7500 Massage chair arrives in 2 boxes.
Open box 1 and remove all contents. Remove the packing materials. Take the chair out of the box. Collect
all the accessories and put them aside.
2
1
1
2
Base & Backrest (Box 1 of 2)
1
OG7500
4
Footrest (Box 2 of 2)
2
OG7500

Locate the two catch pins. Take off the catch pins and put them aside.
3Hang the footrest on bolts of the base and lock with the two catch pins. 6
2 3
Open box 2. Take the footrest out of the box and move it close to the chair.
4
Connect wire connector and air hose connector.
Attention: Align the white points of the two connectors first, then connect them together and screw with the
screw cap.
5Attach the footrest fabric and seat pad. Zip the zipper between the seat pad and the footrest cushion.
According to the requirements of the UL standard for safety (UL1647), the zipper pull must be removed and
discarded.
7
Locate the two catch pins. Catch pins removed.

Turn on the chair. Place the remote control into the holder. Connect the chair to a power supply and turn on
the power switch. Now your massage chair is ready to go!
8
4