Okolab H201-ENCLOSURE-DMi8-LASERSAFE-158 User manual

Assembly Manual
H201-ENCLOSURE-DMi8-LASERSAFE-158
Leica line item - 158206045

Unboxing: BOX-1 Accessories
① ② ③
④
⑤
⑦⑥
Item Label
1Back Cube
2Fixing Plate
3Enclosure
4Left-2-AFC
5Left Base
6Left-1
7Left-1-AFC
8Right –Left handle cover
-Led foot pedal and power supply
•
•
⑧
⑧

⑨
①
②
③
④
⑤
⑧
⑥
⑦
⑩
⑪
⑫
Item
Label
1
Right Base CV
-A
2
Right Base CV
-B
3
Right Base CV
4
4Tune Base
5
Right Base
6
2H Base
Item
Label
7
2H2P Base
8
2P2P Base
9
2P2P Back
-CV
10
2H2P Back
-CV
11
2H Back
-CV
12
Manual
-CV
Migliorare
Unboxing: BOX-2 Accessories

2x
CBSM8-12-2
Step. 1 Place the “Fixing Plate”

Step. 2 Remove the stage and the camera on the pillar

Step. 3
2x CRKB3_15
Screws with
Knurled Resin Heads
M3 x 15mm
Place the “Enclosure” on the “Fixing Plate”

Cage Fastening
On the back side of the front panel there is a plastic
insert. This insert could be pushed on the microscope
surface to fix the enclosure to the microscope
To fix the enclosure
to the cage use the
screw as shown
Step. 4

Step. 5
CRKB3-12
Screws with
Knurled Resin Heads
M3 x 12mm
Place the “Back Cube”

Step. 6 Place the “Left Base”

Step. 7
TCCE-DIN912-ISO4762-M-A2 M 3x6
Place the “Left-1” if the microscope is without
AFC module
Left-1

Place the “Left-1-AFC”e “Left-2-AFC” if the
microscope is with AFC module
Step. 8
Left-2-AFC
Left-1-AFC
Captive screw
M3 x 12mm

Right base configuration
2H2P Base
2P2P Base
4Tune
2ch HyD RLD detector
2ch HyD RLD detector (front position)
plus
2ch PMT (rear position)
2ch PMT plus 2ch PMT
Config. 1
Config. 2
Config. 3
Config. 4
4Tune Base
2H Base
Right Base
Right Base
Right Base
Right Base

Config. 1
CRKB3-12
Screws with
Knurled Resin Heads
M3 x 12mm
Right Base CV
CRKB3-12
Screws with
Knurled Resin Heads
M3 x 12mm

Manual 3-plate stage
11522076
Step.1 Step.2
Step.3 Step.4
Config. 1

Place the “Manual-CV”
Bottom
view

3x M3x6
TPS-CROCE-DIN-965-A2-M
4x M3x12
TPS-CROCE-DIN-965-A2-M
Config. 2
2H Base
4Tune Base

Step.1 Step.2
Step. 3 Step.4
CRKB3-12
Screws with Knurled Resin Heads ,M3 x 12mm
5x M3x8
TPS-CROCE-
DIN-965-A2-M
Step. 5
2H Back-CV

3x M3x6
TPS-CROCE-DIN-965-A2-M
4x M3x12
TPS-CROCE-DIN-965-A2-M
Config. 3 Per
Viti da
2H2P Base
4Tune Base

CRKB3-12
Screws with Knurled Resin Heads M3 x 12mm
5x M3x6
TPS-CROCE-DIN-965-A2-M
2H2P Back-CV