Omcan PH-CN-0014 User manual

Patio Heater
Model PH-CN-0014
Item 23578
Instruction Manual
Revised - 09/01/2016
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 7
-------------------------------------------------------------------------- 7
--------------------------------------------------------------------------------------- 7 - 9
--------------------------------------------------------------------------------------- 9 - 11
--------------------------------------------------------------------------------- 11 - 12
----------------------------------------------------------------------------- 12 - 13
---------------------------------------------------------------------------- 13 - 14
---------------------------------------------------------------------------- 15
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Warranty Registration
Model PH-CN-0014

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
Safety and Warranty
General Information
WARNING
PLEASE READ THE USER MANUAL CAREFULLY BEFORE OPERATING THE MACHINE
This manual has been prepared to enable the correct installation, regulation and maintenance of the unit. It
is therefore of basic importance that the warnings contained in this booklet are carefully read as they supply
essential indications regarding the safety of the installation, use and maintenance. The appliance must be
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.

5
Safety and Warranty
installed, tested and serviced by qualied personnel only. Any adjustment whatsoever not expressly authorized
and in disrespect of this manual voids the warranty. Observe all existing local regulations at the time of
installation. Check that the characteristics of the electric grid correspond to the data given on the serial plate
of the appliance. The packing materials (plastic bags, polystyrene, nails, etc.) as potential hazards, must be
kept out of the reach of children and properly recycled according to the existing local regulations. For repairs
contact Omcan and request the use of original spare parts. If in doubt do not use the appliance and contact
Omcan. Not following the above conditions could risk the safety of those using the unit.
FOR YOUR SAFETY
Improper instillation, adjustment, alteration, service or maintenance can cause serious injury or property
damage. Keep heater away from areas where ammable liquids, gasoline, vapors or explosives are stored
or used. Gas leaks may cause a re or explosion which can cause damage to property, serious bodily injury
or death. Follow all leak-checking procedure before operating this unit highlighted in Step 8. If you smell gas:
shut off gas to appliance, extinguish any open ame and if odor continues, contact your gas supplier or local
re department. This unit consumes air provide 1 inch² of opening for fresh air for each 1,000 Btu/Hr Input
(2.22mm ² / Wof Input). Never use open ame to check for leaks. Fuel systems must be installed by qualied
and licensed personnel. Please contact your local gas supplier for these services.
• Always maintain at least 18” clearance (top) and 24” clearance (side) from combustible materials.
• Always place the heater on a hard a hard leveled surface.
• Do not use if the wind velocity is greater than 10 miles per hour.
• Unit will operate at reduced efciency below 40°F (5°C).
• It is normal for the heater to make hissing sounds at the start. This will decrease as the heater warms up.
• Keep sprinklers and other water sources away from burner and controls.
• Always use extreme caution when near the heater. Young children and pets should be supervised carefully
when they are near the heater. Do not hand clothing or ammable materials on or near the heater. To avoid
burns or clothing catching on re, alert both children and adults to the hazards of high temperatures.
• Certain materials or items are susceptible to damage due to radiant heat when stored under heater.
• Do not alter heater in any manner.
• Inspect heater before each use. If a damaged part is detected, do not operate the heater until an original
Omcan replacement part has been properly installed. Use of unauthorized parts will void warranty and
create an unsafe condition.
• Prior to operating heater, replace any guards or protective devices removed from servicing.
• During operation, the surface of the heater of the burner assembly is very hot and should not be touched
• After shutdown, do not touch burner assembly until heater has completely cooled down (approximately 45
minutes after use.)
• The appliance and its individual shut off valve must be disconnected from the gas supply pipping system
during any pressure testing. The system should be tested in the pressure in excess of 1/2 psig (3.5kpa).
• The appliance must be isolated from the gas supply piping system by closing its individual manual shut off
valve during any pressure testing of the gas supply piping system at test pressure equal to or less than 1/2
psig (3.5kpa).
• Always perform a leak test on ga connections whenever heater is serviced. Never use a ame to test for
leaks. Do not smoke while performing a test leak.
• Caution: It is essential to keep the heater’s valve compartment, burners and circulating air passage clean.

6
Safety and Warranty
• Small insects can enter the burner tube or other openings of the heater. These obstructions can lead to gas
ow problems. Before operating the unit for the rst time, be sure to check for obstructions that may have
occurred during shipment.
• Inspect heater before each use and have it inspected annually by a qualied service person.
• Carbon deposits may create a re hazard. Keep dome and emitter clean at all times.
• Do not clean heater with combustible or corrosive cleaners. Use warm, soap water.
• Do not paint radiant screen, control panel or top canopy reector.
CAUTION:
Liquid propane (LP) gas is ammable and hazardous if handled improperly. Become aware of the
characteristics before using any LP product. LP characteristics include: ammable, explosive, heavier than air-
settles in low areas. In its natural state, propane has no order. For your safety, an odorant is added that smells
like rotten cabbage.
• Contact with liquid LP can cause freeze burns to skin.
• This heater is shipped from the factory for LP gas use only.
• Use only Department of Transportation (DOT) approved “20 lbs.” LP gas cylinders (same commonly used
for gas grills) with Acme Type 1/QCC safety valves. These can valves can be quickly identied by their
external and internal threads.
• The cylinder must be provided with a shutoff valve termination in an LP-gas supply cylinder valve outlet
specied, as applicable, for connection NO. 510 in the standard for compressed Gas Cylinder Valve outlet
and Inlet connections, ANSI/ CGA-V1.
• The cylinder supply system must be arranged for vapor withdrawal.
• The cylinder supply system must include a collar to protect the cylinder valve.
• Never use a cylinder with a damaged body, valve, collar or foot ring.
• When heater is not use, turn Control Valve OFF.
• Always perform a leak test on gas connection whenever a cylinder is connected (see step 8).
Check heater immediately if any following condition exists:
• The smell of gas in conjunction with extreme yellow tipping of burners ames.
• Heater does not reach proper temperature. At temperature less than 40F, heat output will be reduced.
• Heater’s glow is excessively uneven.
• Burner makes popping noises during use. Note: A slight pop is normal when burner is extinguished.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see http://www.omcan.com/warranty.html for complete information.

7
Installation
Technical Specications
Safety and Warranty
Familiarize yourself with all components before proceeding. Do not attempt assembly unless all components
are available. If you believe a component is missing or damaged, contact Omcan for assistance.
Note: All hardware is mounted on a cardboard pack.
Additional Requirements:
The following items are not included but are necessary for the proper assembly of your heater. DO NOT
attempt to assemble without proper tools. An open end wrench (10 & 13mm) is necessary and will be included
in the parts bag.
Models PH-CN-0014
Material Stainless Steel
Safety Features 100% Burner Shut-Off
Heat Range Up to 20 foot diameter
Inlet Gas Supply Pressure Maximum - 10.5” W.C.
Minimum - 7.0” W.C.
Fuel Use propane or butane gas only
Gas Supply Pressure 120 PSI
Consumption 450g/hr - 870g/hr
Weight 32 lbs. / 14.5 kgs.
Dimensions (DWH) 18” x 32” x 87” / 457 x 813 x 2210mm
Item Number 23578
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

8
Installation
Tools needed:
• Adjustable opening wrench (20 cm / 8” long).
• Slip joint pliers (23 cm / 9” long).
• Phillips screw-driver with medium blade.
• Teon plumbing tape for joints.
• Spray bottle of soap solution for leakage test.
ASSEMBLY
Caution: You must follow all steps to properly assemble heater.
Step 1
1. Attach wheel assembly to base. Put 3 pcs post brackets on each position on the stand.
2. Use 3 pcs bolts (M8 x 16mm) to join the brackets and stand.
Step 2
1. Put the post onto the top of 3 pcs post brackets.
2. Use 6 pcs bolts (M6 x 16mm) to join the brackets and the stand.
3. Tighten the bolts and nuts.
NOTE: Labels are shown as compatible with the characteristics of the
display.
Step 3
1. Put the gas line through the post.
Step 4
1. To secure the reector support bolts on the emitter screen cap with 3 pcs screws (90mm
long) & 3 pcs washer (Ø 8mm).
2. Connect the screws & washers to the emitter.
3. Tighten the screws.
Step 5
1. Fit the gas line nut into the gas inlet connector of burner
2. Tighten the gas line nut and gas inlet thread.
3. Put the burner with gas line into the post.
4. Fix the burner base to the post by 4 pcs bolts (M6 x 10 mm).
Step 6
1. Attach regulator to tank and complete attachment.
2. Put LPG gas tank into stand.
Step 7
Check for leaks
1. Make 2-3 oz. of leak check solution by mixing one part liquid dish washing and three part
water.
Post
Gas Hose
Screw

9
FOR YOUR SAFETY:
If at anytime your are unable to light ame and smell gas, wait 5 minutes to allow gas to
dissipate before attempting to light heater. Do NOT touch or move heater for at least 45
minutes after use. Allow all burner elements to cool before touching.
BEFORE TURNING THE GAS SUPPLY ON:
• Do NOT use the product inside a building, garage, or any other enclosed area.
• Ensure surrounding areas are free of combustible materials such as gasoline and other
ammable vapor or liquids.
• Ensure air ventilation and cylinder cover are free from obstructions or debris
• Ensure that any components removed during assembly or servicing are replaced and
fastened prior to starting.
BEFORE LIGHTING
• Heater should be thoroughly inspected before each use by a qualied service person and
maintained annually.
• Wait minimum 5 minutes before relighting a hot heater.
2. Turn gas source ON.
3. With the gas supply turned on, spray some soap solution onto Gas Line and Control Valve
connections.
4. Inspect the solution at the connection is secure.
5. The connection is secure if NO bubbles are visible.
6. If bubbles appear there is a leak.
7. Turn gas source OFF and loosen screw on Clip.
8. Release Gas line tting from control valve and re-attach making sure
connection is secure.
9. Re-light clip. If you continue to see bubbles after several attempts,
contact Omcan for assistance.
CAUTION: The outdoor heater has been checked at all factory
connections for leaks. Recheck all connections, as movement in
shipping can loosen connections. Check for leaks even if your unit
was assembled for you at the store.
Operation
Installation
Emitter
Reector

10
Operation
LIGHTING
1. The gas supply cylinder should be completely turned ON.
2. Push Control Knob IN at the OFF position then turn counterclockwise to High/Light
position.
3. Push the Control Knob In and press the ignitor button several times to light the burner.
Hold for 30 seconds. Release the control knob when burner lights up.
• Flame is display through the Viewing Hole.
• Release the control knob after the ame lights up. If the ame does not light up or goes
out, REPEAT STEP 3.
Note: If a new tank has been connected, wait a few minutes to allow air in the gas
pipeline to ow at the High / Light position.
4. Turn the control knob in the desired temperature position
Note: If you are experiencing any ignition problems, refer to the “Troubleshooting”
section.
MATCH LIGHTING
1. Turn cylinder valve ON.
2. Push the Control Knob IN at the OFF position then turn counter to High/Light position and release.
3. Using a long match (minimum 4” long), insert it into the viewing hole.
4. Push the Control Knob in and light the burner.
5. Flame will ignite and continue to push the control knob for 30- 60 seconds after the ame is on. Release
the knob when the ame remains.
6. If the ame disappears repeat step 1.
7. Turn knob to desired temperature position.
TURNING OFF THE HEATER
Turn the control knob clockwise to Low position and press lightly to Off position.
Turn off the valve on the gas supply cylinder to shut down the heater completely.
RELIGHTING
Turn the knob to OFF position. Wait at least 5 minutes to let gas dissipate before attempting to re-light the
product. Repeat “Lighting” steps.
WARNING
1. Check whole gas system, hose, regulator or burner should be inspected for leak before use.
2. Check the hose assembly for sign on extreme abrasion, cuts or wears. Suspected areas should be leak
tested. If must be replaced with the one specied in the Parts Breakdown section.
3. Make sure the ventilation opening of the cylinder enclosure, control compartment, burner and circulation air
passageways of the heater are free and clear of debris.

11
Maintenance
Operation
To keep exterior surfaces clean, use warm soapy water and never use ammable or corrosive cleaning agents.
While cleaning your unit, be sure to keep the area around the burner are dry at all times. Do not submerge the
control valve assembly. If the gas control is submerged in water, do NOT use it (this product must be replaced).
Keep controls, burner and circulating air passageways clean at all times. Air ow must be free of obstructions.
Signs of blockage include: gas odor with extreme yellow tipping of the ame, heater does not reach the desired
temperature, heater glow is excessively uneven, heater makes popping noises.
Insects can nest in the burner or orices which can damage the heater and render it unsafe for use. Clean
burner holes by using a heavy-duty pipe cleaner. Compressed air may help clear away smaller particles.
Carbon deposits may cause a re hazard. Clean reector and emitter screen with warm soapy water if any
carbon deposits develop.
NOTE: Corrosion can occur quickly in salt-air environments (such as the ocean), Frequently check for
corroded areas and repair them promptly.
TIP: Use high-quality automobile wax to help maintain the appearance of your heater. Apply to exterior
surfaces from the pole down. Do not apply to emitter screen or domes.
4. Always keep a dry chemical re extinguisher readily available. Allow the product to completely shut off for 5
minutes before re-lighting the heater.
5. Do not move or cover the product with a protective cover until completely cooled down.
CAUTION:
Do not inhale the fumes emitted from the heater after. Smoke and odor from the burning oils used in
manufacturing will appear. Both smoke and odor will dissipate after approximately 30 minutes. The heater
should NOT produce thick black smoke.
Note: During the start of the product it is normal for the heater to create hissing sounds. This will
decrease as the heater warms up.
WHEN HEATER IS ON
Emitter screen will transition to bright red due to intense heat and the color will be more visible at night.
Burner will display tongues of blue and yellow ame. An obstruction of airow through the burners occurs when
yellow ames or black smoke is produced. If excessive yellow ame is detected, turn off heater and consult to
“Troubleshooting.”

12
Maintenance
STORAGE
DANGER: CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide which has no odor. Using it in an enclosed space can KILL you.
Never use this appliance in an enclosed space such as: camper, tent, car or home.
FOR YOU SAFETY:
Storage of an appliance indoors is permissible only if the cylinder is disconnected and removed from the
appliance. Cylinders must be stored outdoors in a well-ventilated area out of reach of children. Disconnected
cylinders must have threaded valves plugs tightly installed and must not be stored in a building, garage or any
other enclosed area. Do NOT touch or move heater for at least 45 minutes after each use.
BETWEEN USES:
1. Turn control knob OFF.
2. Turn the LP tank valve OFF.
3. Disconnect LP tank.
4. Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet,
hail, snow, dust or debris).
5. If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages.
Note: Wait until heater cools down before covering the product.
PERIODS OF EXTENDED INACTIVITY OR WHEN TRANSPORTING
1. Turn control knob OFF.
2. Turn the LP tank valve OFF.
3. Disconnect LP tank and move to a secure, well-ventilated location outdoors.
4. Store heater upright in an areas sheltered from direct contact with inclement (such as rain, sleet, hail, snow,
dust or debris).
5. If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages. Never
leave LP canister to direct sunlight or excessive heat.
Note: Wait until heater cools down before covering the product.
Troubleshooting
Problem Cause Solution
Burner won’t light up. Gas pressure is low. Have a professional check has
system.
Blockage in orice. Clear blockage.
Control knob is not in HI position. Turn control knob to HI position.

13
Troubleshooting
Burner ame is low. Gas pressure is low. Have a professional check gas
system.
Supply hose is bent or kinked. Straighten hose.
Control knob fully on. Check burner and orices for
blockage.
Emitter glows uneven.
Note: 1” Bottom of emitter
normally does NOT glow.
Gas pressure is low. Have a professional check the gas
system.
Stand is not on a leveled surface. Place heater on a leveled surface.
Carbon build-up. Dirt or lm on reector or emitter. Clean reector and emitter.
Blockage in burner. Remove blockage and clean
burner interior and exterior.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
23578 PH-CN-0014 Patio Heater 87” / 2210mm
Stainless Steel Propane HMXD-B
Parts Breakdown
Model PH-CN-0014 23578
Item No. Description Position Item No. Description Position Item No. Description Position
23840 Reector for HMXD-B 1 23846 Tank Housing for HMXD-B 7 23852 6 pcs Washers (8mm) for Pin Support
for HMXD-B 13
23841 Emitter for HMXD-B 2 23847 Support Post for HMXD-B 8 23853 4 pcs Bolts (M6 x 10mm) for Assembly
Post and Burner for HMXD-B 14
23842 Burner Base for HMXD-B 3 23848 Galvanized Gas Lines for HMXD-B 9 23854
6 pcs Bolts (M6 x 35mm) & Nuts
(6mm) for Connection of Post and Post
Brackets/Stand for HMXD-B
15
23843 Air Admittance Fences for HMXD-B 4 23849 Stand for HMXD-B 10 23855 3 pcs Bolts (M8 x 16) for Connection of
Post Brackets and Stand for HMXD-B 16
23845 Gas Valve Controller for HMXD-B 5 23850 3 pcs Castle Nut for HMXD-B 11 23856 1 pc Open End wrench (10 & 13mm)
for HMXD-B 17
23844 Post for HMXD-B 6 23851 3 pcs Pins (900mm(L)) for Reector
Support for HMXD-B 12
Caution: Use only original Omcan replacement parts. Use of unauthorized parts or modication of parts will
void warranty and create an unsafe condition.
Always allow heater to cool before attempting service.

14
Parts Breakdown
Model PH-CN-0014 23578

15
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
www.omcan.com/warrantyregistration.html
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diffusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 3,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3,500 productos con origen a nivel mundial.