Omron E5CC-T User manual

ᴶቅ60
45
45
+0.6
0
+0.6
0
+0.6
0
δ48hᮦ - 2.5ε
+1.0
0
45
㺞⽰▒൞Ⲻধ䲟᛻߫θྸуࣖԛ䱨↘θᖾ㜳ሲ㠪䖱
ᓜᡌѣᓜⲺӰ䓡՚ᇩᡌ䍘ӝᦕඅȾ൞ֵ⭞䈛ӝ૷ࢃᓊ
Ԋ㓼䰻䈱ᵢᢁ߂Ⱦ
E5CC-T
ᮦᆍᕅ᧝࡬ಞ
ᆿޞֵ⭞⌞ᝅӁ亯
ᴿީ䈜㓼Ⲻᓊ⭞↛僚θ䈭৸䰻ɅE5@C-Tᮦᆍᕅ᧝࡬ಞ⭞ᡭᢁ߂Ɇ
δCat. No. H188εȾ
ֵ⭞䈪᱄Ҝ
᝕䉘ᛞ䍣Ҧ⅝࿼嗏E5CC-Tᮦᆍᕅ᧝࡬ಞȾ
ᵢᢁ߂ᨅ䘦Ҽӝ૷Ⲻࣕ㜳Ƚᙝ㜳ԛֵӝ૷䗴ࡦᴶֵ֩⭞᭾
󰵳Ⲻᓊ⭞ᯯ⌋Ⱦ
䈭൞ֵ⭞䈛ӝ૷ᰬ⌞ᝅԛсӁ亯φ
gֵ⭞䈛ӝ૷ⲺӰᗻ亱ޭ༽䏩ཕⲺ⭫≊㌱㔕⸛䇼Ⱦ
g൞ֵ⭞䈛ӝ૷ࢃᓊ䙐䈱ᒬ⨼䀙ᵢᢁ߂ԛ⺤ؓ↙⺤Ⲻֵ⭞Ⱦ
g࿛஺ؓ㇗䈛ᢁ߂ԛ⺤ؓ൞䴶㾷ᰬԛ䳅ᰬḛ䰻Ⱦ
⅝࿼嗏ޢ
©All Rights Reserved
䆜઀
CHN
ᆿޞ⌞ᝅӁ亯
䆜઀ㅜⲺ㾷⛯
ተሮ㿺Ṳ ᆿ㻻 䘔᧛δㄥᆆ䘸⭞ᙝഖᵰಞශ㙂ᔸȾε
㿺Ṳ
᧛㓵
ࢃ䶘ᶵⲺݹԬ〦
g°C / °Fφ⑟ᓜঋփ
ṯᦤ⑟ᓜঋփⲺ䇴ᇐٲᱴ⽰CᡌFȾ
g⁗ᕅ䭤
᤿↚䭤᭯ᱴ⽰޻ᇯȾ
᤿䈛᤿䫤1〈ԛрᯯᱴ⽰޻ᇯȾ
•ᰬ᤿օO䭤ૂM䭤ᒬؓᤷ〈䫕ԛр঩࠽ᦘ
Ѱؓᣚ㨒ঋȾ
g㨒ঋ䭤
ֵ⭞䈛䭤࠽ᦘ㨒ঋ。
g〱փ䭤δPF䭤ε
᤿↚䭤θ䇴ᇐⲺࣕ㜳঩Ր᤿儎㓝ࣕ㜳䇴ᇐḽ߼
Ⲻ“PF䇴ᇐ”ࣞ䘆㺂Ⱦ3)䇴㖤৸ᮦ唎䇚䇴ᇐѰֵ
ᮦփ〱փȾ
• :
ᖉ䇴ᇐᴪؓᣚѰ21δ⾷⭞рс
䭤εᰬ⛯ӤȾ
ᬃ֒㨒ঋ
•ᰬ᤿օM䭤ૂD䭤ᒬؓᤷ〈䫕ԛр঩൞䘆㺂
གྷփҁ䰪⴮ӈ࠽ᦘȾ
•唎䇚Ⲻᣛ䆜㊱ශѰ“2”
*1: 㾷ֵ৸ᮦ1Ƚ4ૂ5ᨆבуⲺᣛ䆜㊱ශθሯެ䇴ᇐр䲆фс䲆Ⱦс䲆ૂр䲆࠼
ࡡ⭞ᆍ∃ LૂH᤽⽰Ⱦ
*2: ީӄ䗉ޛ㊱ශૂᣛ䆜㊱ශⲺ亯ⴤθ䈭৸㘹р䶘Ⲻ㺞ṲȾ
*3: ᴿ৸ᮦćinsᰬφ⑟ᓜ䗉ޛڅ〱Ĉ৸ᮦѣⲺ䇴ᇐٲᓊ⭞ӄ᮪Ѡ⑟ᓜ䗉ޛ㤹പȾ
ྸ󰵳䗉ޛڅ〱ٲ䇴ᇐѰ1.2°Cθࡏ䗽ぁٲѰ200°Cᰬθ㔅䗽䗉ޛڅ〱᤿➝
201.2°C༺⨼Ⱦ㙂ྸ󰵳䗉ޛڅ〱ٲ䇴ᇐѰ-1.2°Cθࡏ㔅䗽䗉ޛڅ〱䗽ぁٲ᤿➝
198.8°C༺⨼Ⱦ
*4: ᖉ䖢㠩ࡓခ䇴ᇐ㨒ঋᰬ䘆㺂ڒ↘Ⱦ
δ᧝࡬/ᣛ䆜ൽڒ↘Ⱦε
䈹᮪㨒ঋ
∗൞ᱴ⽰ѰćPV/SPĈᰬ࠰⧦䭏䈥ᱴ⽰θެᆹ⣬ᘷсуՐ࠰⧦Ⱦ
Ȏ㚊㌱ᯯᕅ
Ș࡬䙖୼
Șᢶᵥ૞䈘
⅝࿼嗏р⎭ᴿ䲆ޢ
൦൶ѣളр⎭ᐸ⎜ђ᯦䠇ẛ࠰ࣖᐛ䠇䐥
⭫䈓(86)21-50509988
⅝࿼嗏㠠ࣞѣളᴿ䲆ޢ
൦൶ѣളр⎭ᐸ⎜ђ᯦䬬คѣ䐥ѣ䬬ཝড়ᇚ
⭫䈓(86)21-5307-2222
ᢶᵥ૞䈘✣㓵400-820-4535
㖇൶http://www.fa.omron.com.cn
ᖉ⭕жѠ䭏䈥ᰬθㅢжᱴ⽰ሼᱴ⽰䭏䈥ԙ⸷Ⱦ৸㘹с㺞θṯᦤ䭏䈥ԙ⸷䟽䘸ᖉⲺ᧠᯳Ⱦ
Ỷḛ䗉ޛ㊱ශ৸ᮦⲺ䇴㖤θỶḛ䗉ޛ᧛㓵ᒬỶḛ⑟ᓜՖ᝕ಞᱥ
ᆎ൞⹪ᦕᡌ⸣᧛Ⱦ
ީᦿ⭫Ⓠ߃ᢉᔶθྸ󰵳ᱴ⽰уθࡏ亱ؤ⨼᧝࡬ಞȾྸ󰵳ᱴ⽰ᚘགྷ
↙ᑮθࡏ㜳ᱥ᧝࡬㌱㔕ࡦཌ䜞ᒨᢦȾỶḛཌ䜞ᒨᢦȾ
⺤䇚䗉ޛᔸᑮθ䈭䠃᯦᧛䙐⭫ⓆȾྸ󰵳ᱴ⽰уθࡏ亱ؤ⨼᧝࡬
ಞȾྸ󰵳ᱴ⽰ᚘགྷ↙ᑮθࡏ᭻䳒৕ഖ㜳ᱥ᧝࡬㌱㔕ࡦཌ䜞ᒨ
ᢦȾ䈭Ỷḛཌ䜞ᒨᢦȾ
ㅢжᱴ⽰ ѿ
A/D䖢ᦘ䭏䈥
*
޻ᆎ䭏䈥
䗉ޛ䭏䈥
*
s.err (S. Err)
e111 (E 111)
ᬃ֒
OFF
ᣛ䆜
࠰䭏⣬ᘷ
OFF
OFF
р䘦р䲆
ᣛ䆜ᐛ֒
OFF
OFF
e333 (E333)
䭏䈥ᱴ⽰δ᭻䳒䈀ᯣε
᧝࡬䗉࠰
ᣛ䆜
ṯᦤශૂ䇴ᇐⲺуθᴿӑ⚦㢨Ⲻ䇴ᇐ亯ⴤ㜳уᱴ⽰Ⱦ
ྸ󰵳䗉ޛٲ䎻࠰Ҽᱴ⽰㤹പδ-1999Њ9999εθ঩ֵԃ❬൞᧝࡬㤹പ޻θքӄ-1999Ⲻᮦٲҕሼᱴ⽰Ѱ[[[[θ㙂
儎ӄ9999Ⲻᮦٲሼᱴ⽰Ѱ]]]]Ⱦ൞䘏〃᛻߫сθ᧝࡬䗉࠰ૂᣛ䆜䗉࠰ൽѰ↙ᑮᐛ֒⣬ᘷȾ᧝࡬㤹പ䈜᛻䈭৸
䰻ɅE5ȏC-Tᮦᆍᕅ᧝࡬ಞ⭞ᡭᢁ߂ɆδCat. No. H188εȾ
ֵ⭞ᰬⲺ⌞ᝅӁ亯
൞ᇘᡭⲺᓊ⭞ѣθ⅝࿼嗏у䍕䍙ӝ૷фԱ֋ᇘᡭㄥӝ૷ᡶ⎿Ⲻ㿺ṲȽ㿺㤹ૂḽ߼
ؓᤷж㠪ᙝȾ䈭ࣗᗻ㘹㲇ᵢӝ૷ሯӄᡶᓊ⭞Ⲻ㌱㔕Ƚᵰಞૂ䇴༽䰪Ⲻ䘸⭞ᙝȾֵ⭞
ᰬ䈭⌞ᝅᒬ䚫ᆾᵢӝ૷Ⲻ⾷↘Ӂ亯Ⱦ
൞⋗ᴿ⺤䇚᮪Ѡ㌱㔕䇴䇗ᰬᡶ㘹㲇ࡦⲺ伄䲟θԛ⋗ᴿ⺤䇚൞䇴༽ૂ㌱㔕ѣ䈛⅝࿼
嗏ӝ૷Ⲻ仓ᇐֵ⭞ᶗԬૂ↙⺤ᆿ㻻ᶗԬⲺ᛻߫сθ⾷↘ሼᵢӝ૷ᓊ⭞ӄሯӰ䓡䍘
ӝᆎ൞ћ䠃ধ䲟Ⲻ൰Ⱦ
䈜㿷ӝ૷㿺ṲҜѣؓ䇷ރ䍙Ӂ亯޻ᇯȾ
䆜઀
䆜઀ㅜ
䙐⭫ᵕ䰪θ䈭䀜᪮ㄥᆆȾ
ࡏՐഖ䀜⭫㙂ሲ㠪䖱՚Ⱦ
уᗍ䇟䠇ኔ⢟։Ƚሲ㓵ᡌᆿ㻻ᰬӝ⭕Ⲻ࠽ኇᡌ⒵≊䘑ޛ᧝࡬ಞȽ䈹䈋ᐛޭㄥᡌ䈹䈋ᐛޭ⭫㔼䘔᧛
ಞⲺᕋ㝐рȾࡏՐሲ㠪䀜⭫Ƚ⚡⚴ᡌᵰಞ䈥ࣞ֒Ⱦ
䈭ሼ䈛ӝ૷⭞ӄᴿ᱉⟹᱉⠼≊։Ⲻ൰Ⱦࡏᴿ㜳ഖѰ⠼⛮㙂䙖ᡆ䖱ᓜ՚ᇩȾ
㔓ሯу㾷᣼মȽ᭯㻻ԛؤ⨼䈛ӝ૷ᡌ᧛䀜Ա֋޻䜞ݹԬȾࡏՐሲ㠪䖱ᗤ䀜⭫Ƚ⚡⚴ᡌᵰಞ䈥ࣞ
֒Ⱦ
⌞ᝅι⚡⚴ᡌ䀜⭫Ⲻধ䲟
a) 䈛ӝ૷Ѱ8/ࡍ㺞Ⲻᔶ᭴ශ䗽ぁ᧝࡬䇴༽θᗻ亱ᆿ㻻൞㜳ཕ䱨↘⚡㣧䘮࠰Ⲻᵰ༩ѣȾ
b) ൞ֵ⭞њѠԛрᯣ⭫ᔶީⲺ᛻߫сθ㔪ؤࢃ䈭ݾᯣᔶᡶᴿᔶީθ⺤ؓᵢӝ૷༺ӄᯣ⭫⣬ᘷȾ
c) ؗ䗉ޛѰSELVδᆿޞքু⭫Ⓠεθഔ䐥䲆Ⱦ
d) ⌞ᝅφѰҼࠅቇ⚡⚴ᡌ䀜⭫Ⲻধ䲟θ䈭ሼуⲺ2㊱ഔ䐥Ⲻ䗉࠰ӈ㚊Ⱦ
ྸ󰵳䗉࠰㔝⭫ಞ䎻䗽Ҽ人ᵕⲺֵ⭞ስળθᴿᰬՐ⭕䀜⛯⟊ᡌ⟹✝Ⱦခ㓾㾷⌞ᝅ䗉࠰㔝⭫ಞⲺᓊ
⭞⧥ູθᒬ൞仓ᇐ䍕䖳人ᵕስળԛ޻ֵ⭞Ⱦ䗉࠰㔝⭫ಞⲺ人ᵕስળ䳅⵶䗉࠰䍕䖳ԛᔶީᶗԬⲺ
㙂Ⱦ
ᶴࣞⲺ㷰ѓ㜳ሲ㠪⚡⚴Ⱦ䈭ԛ᤽ᇐⲺ0.43Њ0.58 NgmⲺ᤽ᇐᢣ⸟ᤝ㍝㷰ѓȾ
䈭䇴ᇐ䘸㌱㔕᧝࡬⭞Ⲻӝ૷৸ᮦȾྸ󰵳䇴ᇐуᖉθ㜳Րഖᝅཌᬃ֒㙂䙖ᡆ䍘ӝᦕཧᡌӁ᭻Ⱦ
᧝࡬ಞ䈥ࣞ֒ᖾ㜳䙖ᡆ᧝࡬ᬃ֒ཧ᭾ᡌ䱱↘ᣛ䆜䗉࠰θሲ㠪䍘ӝᦕཧȾѰҼ൞᧝࡬ಞ⭕䈥ࣞ֒
ᰬ⺤ؓᆿޞθᓊ䟽䘸ᖉⲺᆿޞ᧠᯳θྸֵ⭞ঋ⤢Ⲻ㓵䐥ᆿ㻻ⴇ᧝䇴༽Ⱦ
ב⭫⭫ু
ᐛ֒⭫ু㤹പ
ࣕ⦽⎾㙍
᤽⽰㋴ᓜ
δ⧥ູ⑟ᓜφ23°Cε
ӁԬ䗉ޛ
ᴿ᧛⛯䗉ޛ
ᰖ᧛⛯䗉ޛ
᧝࡬䗉࠰1
᧝࡬ᯯ⌋
䖻ࣟ䗉࠰
䖢ᦘ䗉࠰
ֵ⭞⧥ູ⑟ᓜ
ֵ⭞⧥ູ⒵ᓜ
ᆎ۞⑟ᓜ
儎ᓜ
᧞㦆ؓ䲟ѓ
䠃䠅
䱨ᣚㅿ㓝
ᆿ㻻⧥ູ
޻ᆎؓᣚ
Ჸᰬ䗽⭫ু
100Њ240 VACθ50/60 Hzᡌ㘻
24 VACθ50/60 Hz/24 VDC
仓ᇐ⭫ুⲺ85Њ110%
ᴶཝ7.5 VAδ100Њ240VACε
ᴶཝ4.1 VAδ24VACε/ᴶཝ2.3 Wδ24VDCε
✣⭫ڬ䗉ޛφ
δᱴ⽰ٲⲺ±0.3%ᡌ㘻±1°CѣⲺ䖹ཝٲε
ᴶཝ±1փᮦ
䫸⭫䱱䗉ޛφ
δᱴ⽰ٲⲺ±0.2%ᡌ㘻±0.8°CѣⲺ䖹ཝٲε
ᴶཝ±1փᮦ
⁗ᤕ䠅䗉ޛφ
±0.2 % FS ᴶཝ±1փᮦ
䗉࠰⭫⍷φ∅Ѡ䀜⛯㓜7 mAȾ
ONφᴶཝ1 kΩθOFFφᴶቅ100 kΩ
ONφ⇁֏⭫ুᴶཝ1.5 V
OFFφ╅⭫⍷ᴶཝ0.1 mA
㔝⭫ಞ䗉࠰φSPST-NO
250 VACθ3 Aδ䱱ᙝ䍕䖳ε
㔝⭫ಞ⭫≊ስળφ100,000⅗䘆㺂
⭫ু䗉࠰δ⭞ӄ傧ࣞSSRεφ
12 VDC±20%θ21 mA
㓵ᙝ⭫⍷䗉࠰φ4Њ20 mA DCθ0Њ20mA DC
䍕䖳φᴶཝ500 Ω
2䐥PID᧝࡬
㔝⭫ಞ䗉࠰φSPST-NOθ250 VACθ
2 Aδ䱱ᙝ䍕䖳ε
㔝⭫ಞ⭫≊ስળφ100,000⅗䘆㺂
4Њ20 mA DCθᴶཝ䍕䖳500 Ω
1Њ5 VDCθᴶቅ䍕䖳1 kΩ
-10Њ55°C
δᓊ䚵ރ㔉ߦᡌ㔉䵨ε
RH 25Њ85%
-25Њ65°C
δᓊ䚵ރ㔉ߦᡌ㔉䵨ε
ᴶ儎2,000㊩
T2Aθ250 VACθᰬᔬθք⟊ᯣᇯ䠅
㓜120 gδӻᮦᆍ᧝࡬ಞε
ࢃ䶘ᶵφIP66
༩φIP20θㄥᆆφIP00
ᆿ㻻〃㊱IIθ
⊗ḉㅿ㓝2δIEC61010-1ε
䶔ᥛ޻ᆎ
δߏ⅗ᮦφ1,000,000ε
⸣ᰬ䰪䗽⭫ু9δ⭫Ⓠ⭫ুε
䮵ᰬ䰪䗽⭫ু9δ⭫Ⓠ⭫ুε
䈭ࣗᗻ䚫ᆾԛс⌞ᝅӁ亯θԛ䚵ރᬃ֒ཧ䈥Ƚ䈥ࣞ֒ᡌሯӝ૷⢯ᙝࣕ㜳䙖ᡆу㢥ᖧଃȾࡏθ
㜳Րሲ㠪ᝅཌӁ᭻Ⱦ䈭൞᤽ᇐ㤹പ޻ֵ⭞ᵢӝ૷Ⱦ
(1) 䈛ӝ૷㻡䇴䇗Ѱᇚ޻ֵ⭞Ⱦ䈭൞ᇚཌֵ⭞Ⱦ䈭൞ԛсԱ֋൦ᯯֵ⭞ᡌᆎ᭴䈛ӝ૷Ⱦ
g ⴪᧛ࣖ✣䇴༽✣䗆ሺⲺ൦ᯯȾ
g ᴿ⏨։ᡌ⋯≊伔ⒻⲺ൦ᯯȾ
g 䱩ݿ⴪ሺⲺ൦ᯯȾ
g ⚦቎䖹ཐᡌᴿ㞆㲶ᙝ≊։δ⢯ࡡᱥ⺡⢟≊։ૂ≞≊εⲺ൦ᯯȾ
g ⑟ᓜ࢝⛾Ⲻ൦ᯯȾ
g 㔉ߦૂ㔉䵨Ⲻ൦ᯯȾ
g ᴿ䴽ࣞᡌཝⲺߨ࠱Ⲻ൦ᯯȾ
(2) ൞仓ᇐⲺ⑟ᓜૂ⒵ᓜ㤹പ޻ֵ⭞ /ᆎ۞䈛䇴༽Ⱦᗻ㾷ᰬᓊ䟽ᕰ࡬߭পȾ
(3) Ѱ࡟ӄᮙ✣θу㾷ມດ䈛ӝ૷ઞപⲺグ䰪Ⱦ
у㾷๫ດӝ૷Ⲻ䙐伄ᆊȾ
(4) ᤿ㄥᆆⲺᶷᙝ䘑㺂↙⺤Ⲻ᧛㓵Ⱦ
(5) 䈭ֵ⭞㿺ᇐተሮⲺু᧛ㄥᆆδM3θᇳᓜቅӄᡌㅿӄ 5.8 mmε䘑㺂᧛㓵Ⱦֵ⭞ḽᴿ AWG24
ЊAWG18δ⴮ᖉӄ⁠ᡠ䶘〥 0.205 Њ0.8231mm2εⲺ䬒㔔㓵ᡌᇔᗹ⭫㔼䘔᧛㼮㓵ૂ᧛㓵ᶵȾδ࢛
㓵䮵ᓜѰ 6Њ8 mmȾεжѠㄥᆆ޻ᴶཐᨈޛњṯ⴮ශተሮⲺሲ㓵ᡌু᧛ㄥᆆȾ
(6) у⭞Ⲻㄥᆆу㾷᧛㓵Ⱦ
(7) ൞᧝࡬ಞфԛӝ⭕儎仇ૂ⎠⏂Ⲻ䇴༽ҁ䰪ᓊؓᤷ䏩ཕ䘒Ⲻ䐓⿱Ⱦሼ儎ুᡌཝ⭫⍷⭫Ⓠ㓵
фެᆹሲ㓵䳊⿱θ൞ㄥᆆ᧛㓵ᰬ䚵ރф⭫Ⓠ㓵ާㄥᡌᒬ㚊Ⱦ
(8) ൞仓ᇐ䍕䖳ૂב⭫⭫Ⓠсֵ⭞䈛ӝ૷Ⱦ
(9) ֵ⭞ᔶީᡌ㔝⭫ಞ䀜⛯ԛ⺤ؓ൞њ〈޻ሼ⭫ⓆѰ仓ᇐ⭫ুȾྸ󰵳⭫ুᱥ䙆⑆рⲺθ⭫
Ⓠ㜳ᰖ⌋གྷփᡌ㘻⭕䗉࠰䈥ࣞ֒Ⱦ
(10)
൞᧛䙐⭫Ⓠࡦᔶခᇔ䱻ᬃ֒ࢃᓊ⺤ؓ᧝࡬ಞ䘑㺂30࠼䫕ԛрⲺ人✣θԛؓ䇷↙⺤Ⲻ⑟ᓜᱴ⽰Ⱦ
(11) ൞䈛ӝ૷Ⲻ䱺䘇ᓊ䈛ᴿᔶީᡌ㘻ᯣ䐥ಞȾᔶީᡌ㘻ᯣ䐥ಞᓊ䈛൞ᬃ֒㘻׵ӄཕࡦⲺ൦ᯯθ
ᒬъᴿ᱄ᱴⲺᯣᔶḽᘍȾ
(12) ␻⌷ᰬθ䈭⭞ᒨⲺ䖥ᐹᬜᤣȾ䈭ֵ⭞〶䠀ࡸȽ⊳⋯Ƚ䞈㋴ㅿ⓬ࡸⲺ㦥૷ȾࡏՐሲ㠪
ᖘᡌ㢨Ⱦ
(13) ൞䇴䇗㌱㔕δྸ᧝࡬䶘ᶵεⲺᰬُθ䴶㾷㘹㲇ࡦ᧝࡬ಞⲺ䗉࠰൞⭫Ⓠр⭫ᴿ2〈ⲺᔬᰬȾ
(14) ᖉ࠽ᦘࡦࡓခ䇴ᇐ㨒ঋᰬθ䗉࠰㜳Րީ䰣Ⱦ൞ᇔ᯳᧝࡬ᰬ䴶㾷㘹㲇ࡦ䘏ж⛯Ⱦ
(15) 䶔ᥛ޻ᆎⲺߏ⅗ᮦᱥᴿ䲆ⲺȾᡶԛ൞䙐ؗᡌެᆹᬃ֒䴶㾷仇㑷䠃ߏᮦᦤᰬθ䈭ֵ⭞ RAM
ߏ⁗ᕅȾ
(16) ᣼ম᧝࡬ಞ䘑㺂ᓕᔹ༺⨼ᰬθ䈭ֵ⭞䘸ᖉⲺᐛޭȾ
(17) 䈭䎻䗽㿺Ṳѣ㔏࠰Ⲻ䙐ؗ䐓⿱ᒬֵ⭞᤽ᇐⲺ䙐ؗ⭫㔼Ⱦީӄ䙐ؗ䐓⿱ૂ⭫㔼㿺Ṳθ䈭৸
䰻ɅE5ȏC-T ᮦᆍᕅ᧝࡬ಞ⭞ᡭᢁ߂ɆδCat. No. H188εȾ
(18) 䘔᧛Ҽ USB ㌱ࡍ䖢ᦘ⭫㔼ᰬθ䈭ᔶȽީ᧝࡬ಞⲺ⭫ⓆȾࡏՐሲ㠪᧝࡬ಞ᭻䳒Ⱦ
(19) ㄥᆆᴶ儎⑟ᓜ䗴 đθ䈭ཐࣖቅᗹȾ
stb
0.00
p
8.0
i
233
wt-b
off
ins
0.0
M
M
M
M
M
d
40
at
off
cmwt
off
spmd
psp
fsp
0
M
M
M
M
ol-h
100.0
ol-l
0.0
M
of-r
50.0
M
M
M
M
plcm
1234
M
ct1
0.0
hb1
0.0
M
M
ᚈᇐSP
〥࠼ᰬ䰪
δঋփφ〈ε
∊ׁᑜ
ATᢝ㺂/⎾
100%ATᢝ㺂at-2
40%ATᢝ㺂at-1
ࣖ✣ಞ⭫⍷ٲⴇ᧝
δঋփφAε
ࣖ✣ಞᯣ㓵Ỷ⎁1
δঋփφAε
ᗤ࠼ᰬ䰪
δঋփφ〈ε
䙐ؗߏޛ
SP⁗ᕅ
MVр䲆
MVс䲆
PV䗉ޛڅ〱䠅 *3
ㅿᖻ䰪
ᖻᵰᰬ䰪
䙐ؗⴇ᧝
䈹᮪㨒ঋ⭞ӄ൞᧝࡬ᰬ䗉ޛ䇴ᇐٲૂڅ〱ٲȾ
ᢁࣞགྷփٲ
␻䲚PᡌPD᧝࡬
ᵕ䰪Ⲻڅ〱䠅Ⱦ
orl
0.0
MV⦽ᶷ䲆
䘆㺂ڒ↘
δ᧝࡬ᣛ䆜ൽڒ↘Ⱦε *4
ࡓခ䇴ᇐ㨒ঋ
ተሮδmmε
E5CC-T唎䇚䇴ᇐѰжKශ✣⭫ڬδ䗉ޛ㊱ශ5εȾ
ྸ󰵳ֵ⭞уⲺՖ᝕ಞθࡏՐ⭕䗉ޛ䭏䈥δs.errεȾ
Ỷḛ䗉ޛ㊱ශ৸ᮦⲺ䇴㖤Ⱦ
䙐⭫ҁࢃỶḛ᧛㓵Ⱦ
*1
*1
*1
X
ON
OFF SP
X
ON
OFF SP
ON
OFF SP
X
X
ON
OFF SP
LH
ON
OFF SP
X
ON
OFF SP
X
ON
OFF SP
X
ON
OFF 0
ON
OFF
X
0
X
ON
OFF 0
X
ON
OFF 0
ON
OFF
X
0
X
ON
OFF 0
X
ON
OFF 0
X
ON
OFF 0
X
ON
OFF 0
X
ON
OFF 0
ON
OFF
X
0
ON
OFF
X
0
ON
OFF
X
0
ON
OFF
X
0
LH
ON
OFF SP
SP
ON
OFF
X
ON
OFF
X
0
1
0
2
3
4
5
6
7
8
9
14
15
16
17
10
11
12
13
SP
X
ON
OFF
ON
OFF
X
0
䙐⭫
䗉ޛ㊱ශ *2
∊ׁ㕟᭴р䲆δӻ䲆
䇴ᇐ⁗ᤕ䠅䗉ޛᰬε
∊ׁ㕟᭴с䲆δӻ䲆
䇴ᇐ⁗ᤕ䠅䗉ޛᰬε
ቅᮦ⛯փ㖤δӻ䲆
䇴ᇐ⁗ᤕ䠅䗉ޛᰬε
⑟ᓜঋփ
SPр䲆
SPс䲆
in-t
5
in-h
100
in-l
0
dp
0
d-u
c
17
18 12
15
16
1
2
13
14
3
11
4
6
7
8
9
10
5
ࣞ֒ᱴ⽰ 6
4
5
6
5
6
Pt
+
−
mA
−
+
5
4
Ֆ᝕ಞ⑟ᓜ/⁗ᤕ䠅䗉ޛ
V
−5
V6
+
4
TC
4
I
δᰖᶷᙝε
11
12
䗉ޛ⭫Ⓠ
11
12
100Њ240 VAC 24 VAC/DC
(64)
85
60
4
144.8×44.8
䖻ࣟ䗉࠰
䖻ࣟ䗉࠰1Ƚ2Ƚ3
7
8
9
10
䖻ࣟ䗉࠰2
䖻ࣟ䗉࠰3
䖻ࣟ䗉࠰1
+
+
−
16
17
18
13
16
17
18
13
14
15
18
16
17
065
ӁԬ䗉ޛ1Њ4
064
䙐ؗδRS-485εૂ
ӁԬ䗉ޛ3Ƚ4
13
066
ӁԬ䗉ޛ1Ƚ2ૂ䖢ᦘ
䗉࠰
䘿亯
061
ӁԬ䗉ޛ1Ƚ2ૂ
CT1
V
I
14
15
14
15
EV1
EV2
EV1
EV2
EV3
EV4
EV3
EV4
B(+)
A(−)
RS-485
+
−
3
1
2
3
1
2−
Ѡ㓵ᙝ⭫⍷
Ѡ㔝⭫ಞ
3
᧝࡬䗉࠰1
1
2
Ѡ⭫ু
665傧ࣞщ⭞
+
RX QX CX
൞㻻޻ᴿφ
gѱঋݹ
gֵ⭞䈪᱄Ҝ
g䱨≪ᇼሷാδY92S-P8εφc
g䘸䞃ಞδY92F-49εφd
୤Ԭ
gㄥᆆⴌδE53-COV23ε
gUSBѨ㺂䖢ᦘ⭫㔼
δE58-CIFQ2ε
∗䈭᣼с᧛㓵ᶵȾࡏθՐሲ㠪᭻䳒ᡌ䈥ࣞ֒Ⱦ
∗ӝ૷Ⲻр䜞༽ᴿ䈹䈋ᐛޭㄥȾᖉ䴶ֵ⭞䈹䈋ᐛޭᰬθ䙐䗽䈛ㄥሼѠӰ䇗㇍ᵰфᵢӝ૷⴮䘔Ⱦ䘔᧛ѠӰ䇗㇍ᵰфӝ૷䴶㾷
E58-CIFQ2 USBѨ㺂䖢ᦘ⭫㔼Ⱦδֵ⭞䈛ӝ૷ᰬуж⴪䘔᧛USBѨ㺂䖢ᦘ⭫㔼Ⱦε
䈜㓼Ⲻ䘔᧛ᯯ⌋θ䈭৸➝USBѨ㺂䖢ᦘ⭫㔼䱺ᑜⲺֵ⭞䈪᱄ҜȾ
gㅢжᱴ⽰
䗽ぁٲᡌ䇴ᇐᮦᦤ㊱ශ
gㅢӂᱴ⽰
䇴ᇐٲȽ䇴ᇐᮦᦤ䈱࠰ٲᡌᴪ᭯Ⲻ䗉ޛٲ
gрૂс䭤
∅᤿ж⅗U䭤θㅢӂᱴ⽰рⲺٲሼ໔ཝᡌᱴ
⽰сжѠٲȾ
∅᤿ж⅗D䭤θㅢӂᱴ⽰рⲺٲሼࠅቅᡌ䘊
ഔржѠٲȾ
•TUNE:
$7㠠ࣞ䈹᮪ᰬӤ⚥Ⱦ
•CMW:
ᖉ䙐ؗߏݷ䇮ᰬ⛯Ӥθ⾷↘ᰬ➺⚣Ⱦ
°C= c
°F= f
ࡓခ䇴ᇐ㨒ঋԛֵ⭞ᡭ᤽ᇐ௒⅘Ⲻᐛ֒ᶗԬδ䗉ޛ㊱ශȽᣛ䆜㊱
ශȽㅿㅿεȾ
ᬃ֒㨒ঋ
4058646-0A
M
M
M
M
M
M
M
∗ ѰㅜEMCḽ߼θ䘔᧛Ֆ᝕ಞⲺ⭫㔼уᗍ䮵ӄ30㊩Ⱦ
ྸ󰵳⭫㔼䮵ᓜ䎻䗽30㊩θࡏуㅜEMCḽ߼Ⱦ
ঋ⤢ᆿ㻻δmmε ㍝ᇼᆿ㻻δmmε
gሼѱঋݹᨈޛ䶘ᶵδ1Њ5mm৐εⲺᆿ㻻ᆊѣȾᣀᆿ㻻᭥󰶍δᨆבεᨈޛ༩京䜞ૂᓋ䜞Ⲻ
രᇐ″ѣȾ
gᤝ㍝䘸䞃ಞ京䜞ૂᓋ䜞Ⲻњ仍ᆿ㻻㷰ѓֵެؓᤷᒩ㺗θᴶ㓾ֵެᢣ⸟ؓᤷ൞0.29㠩
0.39Ngmҁ䰪Ⱦ
gᖉᆿ㻻ཐᵰಞᰬθ䈭⺤ؓ⧥ູ⑟ᓜу䎻䗽㿺ᇐ䲆ٲȾ
㍝ᇼᆿ㻻ᰖ⌋⺤ؓ䱨≪ᙝ㜳Ⱦ
ᖉᴿ䱨≪㾷≸ᰬθ䈭൞ࢃ䶘
ᶵⲺםᆿ㻻䱨≪ᇼሷാȾ
CQR
cd
䶔❀᧛ㄥᆆተሮφM3
䗉࠰1䗉࠰1䗉࠰1
A
B
B
LH
ON
OFF
SP
᧝࡬䗉࠰1
㔝⭫ಞ
250 VACθ3 Aδ䱱ᙝ䍕䖳ε
⭫ুδ⭞ӄ傧ࣞSSRε
12 VDCθ21 mA
㓵ᙝ⭫⍷
0Њ20 mA DC
䍕䖳φᴶཝ500 Ω
4Њ20 mA DC
㔝⭫ಞ
250 VACθ2 A
δ䱱ᙝ䍕䖳ε
䖻ࣟ䗉࠰
48×48
•SUB1Њ3φᱴ⽰䖻ࣟ䗉࠰Њ
• FSP:
ᚈᇐ63⁗ᕅѰᔶ⣬ᘷᰬӤ⚥Ⱦ
•OUT1φᱴ⽰᧝࡬䗉࠰
• RST:
ぁᓅགྷփѣӤ⚥Ⱦ
• MANU:
ᢁࣞ⁗ᕅᰬӤ⚥Ⱦ
• WAIT:
ぁᓅᖻᵰѣӤ⚥Ⱦ
pru
m
pvst
sp
tspu
0
M
M
M
M
M
M
M
alt1
2
alh1
0.2
M
M
M
Ֆ䘷䗉࠰㊱ශ
tr-t
off
Ֆ䘷䗉࠰р䲆
tr-h
100.0
Ֆ䘷䗉࠰с䲆
tr-l
0.0
ӁԬ䗉ޛ࠼䞃1
ӁԬ䗉ޛ࠼䞃2
ӁԬ䗉ޛ࠼䞃3Њ4
䖢㠩儎㓝ࣕ㜳
䇴ᇐ㨒ঋ
amov
0
Ֆ䘷䗉࠰ؗ
trst
4-20
M
M
M
M
ev-2
adv
ev-1
rr-1
M
M
ev-3
none
M
M
25
0
hold
off
ct1
0.0
pgsg
0.00
prg
0
a-m
r-r
rst
25
0
M
25
0
M
M
M
M
M
seg
0
M
M
stbm
0.00
prgt
0.00
M
M
rptm
0
M
M
styp
ramp
sp
0
M
pr
0
M
time
0.00
M
rpt
0
link
end
M
M
M
pid
1
M
MM
d.seg
end
U
Eend 0Њ7ᰬ
s-no
8
M
M
7
6
5
4
3
2
1
d.prg
0
D
7
6
5
4
3
2
1
d.seg
0
al1l
0
M
al-1
0
al1h
0
M
M
of1
0.00
M
ts1s
0
on1
0.00
M
M
25
0
U
D
U
D
d.pid
1
M
ᴿީ儎㓝ࣕ㜳䇴ᇐ㨒ঋȽᢁࣞ᧝࡬㨒ঋԛެᆹࣕ㜳Ⲻ䈜㓼ؗᚥθ䈭৸䰻ɅE5ȏC-T
ᮦᆍᕅ᧝࡬ಞ⭞ᡭᢁ߂ɆδCat. No. H188εȾᴿީ䙐ؗⲺ䈜㓼ؗᚥθ䈭৸䰻ɅE5ȏ
C-Tᮦᆍᕅ᧝࡬ಞ䙐ؗᢁ߂ɆδCat. No. H189εȾ
ެᆹࣕ㜳
ؓᣚ㨒ঋ
PV/SP (1)
䘔᧛ⲺՖ᝕ಞф
䗉ޛ㊱ශуᰬθ
ᱴ⽰s.errȾ
PV/SP (2)
䘔᧛ⲺՖ᝕ಞф
䗉ޛ㊱ශуᰬθ
ᱴ⽰s.errȾ
㠠ࣞ/ᢁࣞ࠽ᦘ
ӻ䲆PID ᧝࡬
᤿օOૂ
M䭤㠩ቇ
1〈
᤿օOૂM
䭤㠩ቇ3〈
PID䇴ᇐ㨒ঋ
᤿Oδу䎻䗽1〈ε ᤿Oδу䎻䗽1〈ε
᤿O
δу䎻䗽1〈ε
᤿O
δу䎻䗽1〈ε
᤿օO㠩ቇ1〈
δㅢжᱴ⽰䰠⛷θ❬᧝࡬ڒ↘Ⱦε
᤿օO㠩ቇ3〈
*2
ᣛ䆜Њ㊱ශ
ᣛ䆜Њ└
ぁᓅᰬ䰪ঋփ
ᰬ䰪䇴ᇐᯒ඗䇴ᇐ
ᯒ඗ᰬ䰪䇴ᇐঋփ
གྷփᬃ֒
䙐⭫Ⲻᬃ֒
䘆㺂㔉ᶕᰬⲺᬃ֒
PVᔶခ
ぁᓅ㕌
ᐨ䗽ぁᓅᰬ䰪ⴇ᧝
ぁᓅᢝ㺂䠃གྷⴇ᧝
࢟֏ᖻᵰᰬ䰪ⴇ᧝
࠼⇫ 㕌
Ჸڒ
ぁᓅ1Rⴇ᧝
࠼⇫1Rⴇ᧝
ࣖ✣ಞ⭫⍷ٲ
ⴇ᧝
δঋփφAε
ぁᓅⲺ
䘆㺂གྷփ
PID䇴ᇐ㕌
ᣛ䆜ٲ
Њ
ᣛ䆜р䲆
Њ
ᣛ䆜с䲆
Њ
ֵ⭞Ⲻ࠼⇫㕌
ᱴ⽰ぁᓅ䘿亯
࠼⇫nṲᕅ
ӻ䲆ᯒ඗䇴ᇐᰬ
࠼⇫n SP
࠼⇫nᰬ䰪
ᰬ䰪ؗЊ
䇴ᇐ࠼⇫
ᰬ䰪ؗЊ
21ᰬ䰪
ᰬ䰪ؗЊ
2))ᰬ䰪
൞↚㨒ঋѣθ䗉ޛぁᓅⲺ
63ૂᰬ䰪Ⱦ
ᴿީެᆹؗᚥθ 䈭৸䰻
ɅE5@C-Tᮦᆍᕅ᧝࡬ಞ⭞ᡭᢁ߂Ɇ
δCat. No. H188εȾ
ᬃ֒ᰬᓊ↙ᑮֵ⭞ᬃ֒㨒ঋȾ
ぁᓅ䬴᧛
ⴤḽ
ぁᓅ
䠃གྷ
᧝࡬䗉࠰
ؗ
䘿᤟ᱴ⽰ⲺPID
t-u
h-m
t-pr
time
rtsm
stop
p-on
cont
eset
rst
᧝࡬䗉࠰ 䘿亯
E5CC T M
CCT5
13
14
15
16
17
18
EV1
EV2
CT1
+
+
-
ᡶᴿPID㓺ATр䲆SP
䖢ᦘ䗉࠰
䈭൞⚦㢨ㄥᆆр䘔᧛Ա֋ಞԬȾ
ሯ∊ׁ㕟᭴䟽⭞сࡍ㤹പφ-1999Њ9999Ƚ
-199.9Њ999.9Ƚ-19.99Њ99.99Ƚ-1.999Њ
9.999
⭫⍷䗉ޛ
⭫ু䗉ޛ
⁗ᤕ䠅䗉ޛ
㊱ශ
4Њ20mA
0Њ20mA
1Њ5V
0Њ5V
0Њ10V
25
26
27
28
29
䇴ᇐ㤹പ
䗉ޛ㊱ශ 䗉ޛ
Pt100
JPt100
✣⭫ڬ K
J
T
E
L
U
N
R
S
B
W
PL II
䇴ᇐ
10Њ70°C
60Њ120°C
115Њ165°C
140Њ260°C
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
䗉ޛ㊱ශ
-200Њ850
-199.9Њ500.0
0.0Њ100.0
-199.9Њ500.0
0.0Њ100.0
-200Њ1300
-20.0Њ500.0
-100Њ850
-20.0Њ400.0
-200Њ400
-199.9Њ400.0
-200Њ600
-100Њ850
-200Њ400
-199.9Њ400.0
-200Њ1300
0Њ1700
0Њ1700
100Њ1800
0Њ2300
0Њ1300
0Њ90
0Њ120
0Њ165
0Њ260
-300Њ1500
-199.9Њ900.0
0.0Њ210.0
-199.9Њ900.0
0.0Њ210.0
-300Њ2300
0.0Њ900.0
-100Њ1500
0.0Њ750.0
-300Њ700
-199.9Њ700.0
-300Њ1100
-100Њ1500
-300Њ700
-199.9Њ700.0
-300Њ2300
0Њ3000
0Њ3000
300Њ3200
0Њ3200
0Њ2300
0Њ190
0Њ240
0Њ320
0Њ500
䫸⭫䱱
⑟ᓜ䇗
∗唎䇚ٲᱥ“5”Ⱦ
∗ᖉ䗉ޛ㊱ශуᱥ䫸⭫䱱㙂䭏䈥Ⲻሼ䫸⭫䱱᧛ޛᰬθሼՐᱴ⽰s.errȾѰҼ␻䲚s.err
ᱴ⽰θ䴶㾷↙⺤᧛㓵ᒬ䠃᯦р⭫Ⱦ
°C °F
㓘ཌ⑟ᓜ
Ֆ᝕ಞ
ES1B
⑟ᓜ䗉ޛ
ᣛ䆜㊱ශ
ṯᦤLȽHٲ
Ⲻу㙂у
ṯᦤLȽHٲ
Ⲻу㙂у
ṯᦤLȽHٲ
Ⲻу㙂у
ᰖᣛ䆜ࣕ㜳 ᰖ䗉࠰
㔓ሯٲр䲆
㔓ሯٲс䲆
LBAδӻሯᣛ䆜1ε
څᐤр/с㤹പ
څᐤр䲆
څᐤр/с䲆
څᐤс䲆
ᣛ䆜䗉࠰ࣕ㜳
↙ᣛ䆜ٲδXε
䍕ᣛ䆜ٲδXε
䇴ᇐ
PV⦽ᣛ䆜
SP㔓ሯٲр䲆
SP㔓ሯٲс䲆
MV㔓ሯٲр䲆
MV㔓ሯٲс䲆
څᐤр/с䲆ᖻᵰᓅࡍON
څᐤр䲆ᖻᵰᓅࡍON
څᐤс䲆ᖻᵰᓅࡍON
㔓ሯٲр䲆ᖻᵰᓅࡍON
㔓ሯٲс䲆ᖻᵰᓅࡍON
o1st
4-20
sl-h
1300
M
sl-l
-200
ᬃ֒㨒ঋⲺ
PV/SP(1)(2)
࠼⇫nᯒ඗
ӻ䲆ᯒ඗䇴ᇐᰬ
ᱴ⽰࠼⇫䘿亯θ
ENDᡌ0ࡦ࠼⇫㕌−1
൞UぁᓅSP⁗ᕅ
с1〈䫕ԛр
ࣗᗻֵᗍ⭫Ⓠж⅗םр⭕ⲺᲸᰬ䗽⭫ুу㾷䎻䗽ԛс⭫ুٲȾ
䘎䈭᤿➝ᵢӝ૷Ⲻ⭫Ⓠ⭫ু䘑㺂⺤䇚Ⱦ
⸣ᰬ䰪䗽⭫ুφ1200V+δ⭫Ⓠ⭫ুε
䮵ᰬ䰪䗽⭫ুφ250V+δ⭫Ⓠ⭫ুε
൞ֵ⭞ᵢӝ૷ᰬθ䈭ࣗᗻཌ᧛䈪᱄Ҝр᧞㦆Ⲻؓ䲟ѓȾ
ྸ󰵳ӝ૷ᵠ᤿ᵢޢ᤽ᇐⲺᯯ⌋ֵ⭞θ䛙Ѿӝ૷ޭ༽Ⲻؓᣚࣕ㜳ᖾ
㜳ᦕඅȾ
൞䗉ޛ⭫ⓆȽ㔝⭫ಞ䗉࠰ҁ䰪ԛެᆹㄥᆆҁ䰪ᨆבҼᕰ
㔓㕎Ⱦ
ㅜᆿޞḽ߼
ީӄ⁗ᤕ䗉ޛ
•
䗉ޛ⭫ুᡌ⭫⍷ᰬθ䈭᤿➝ᵢӝ૷Ⲻ䗉ޛ㊱ࡡ䇴ᇐ䗉ޛ㊱ශȾ
•䈭ሼᵢӝ૷⭞ᶛ⎁ᇐć⎁䠅㤹⮪Ѱ II Ƚ III Ƚ IV ĈⲺഔ䐥Ⱦ
•
䈭ሼᵢᡆ૷⭞ᶛ⎁ᇐćদࣖ⭫ু䎻䗽30Vrmsᡌ60VDCĈⲺሯ䊗Ⱦ
ㅜEN/IECḽ߼
䘏ᱥж〃$㊱ӝ૷Ⱦ
ഖެ൞օᆻѣՐሲ㠪ᰖ㓵⭫ᒨᢦθᡶԛ㾷≸⭞ᡭ䟽䘸ᖉⲺ᧠᯳
ࠅቇᒨᢦȾ
ぁᓅ䇴ᇐ㨒ঋ
−
+
+
−
+
+
−
+
+
−
+
+
㓵ᙝ⭫⍷䗉࠰ᰬθ0%䗉࠰ԛཌ
ൽӤ⚥Ⱦ
Ͳ匏匶匶櫋怺殯愯暧皻柦匶沖沲
決匶匶垚櫋怺殯Ͳ匏洊沖砒洇穯匶匶嵢昢砖廪沖嬖垚斲殯沖垚決洖汊
渂汞穞柢匶愚岂彶儆洛歾汞滆櫳櫖昢斲殯穞垚冉汊徯洇求嵢穯城埪
᧝࡬ઞᵕδࣖ✣ε
δঋփφ〈ε
∗⭫ু䗉࠰
δ⭞ӄ傧ࣞSSRεφ2
cp
20
M
orev
or-r
↙/䘆㺂
䘆㺂δࣖ✣εѣ
=or-r
↙䘆㺂δ߭পεѣ
=or-d
M
oapt
0
pmsk
on
icpt
1
wtpt
off
pfpt
off
M
M
M
M
M
ᬃ֒䈹᮪ؓᣚ
ࡓခ䇴ᇐ
䙐ؗؓᣚ
䇴ᇐ᭯ؓᣚ
PF䭤ؓᣚ
৸ᮦኅ㭳ᴿ᭾
䲆࡬ԛᱴ⽰ᡌ᭯Ⲻ䇴ᇐ㊱ශԛ䙐䗽᤿䭤ᬃ֒
䘑㺂Ⲻᴪ᭯Ⱦ

60 min.
45
45
+0.6
0
+0.6
0
+0.6
0
(48 x number of units - 2.5)+1.0
0
45
Indicates a potentially hazardous situation which, if
not avoided, is likely to result in minor or moderate
injury or property damage. Read this manual
carefully before using the product.
E5CC-T
Digital Controller
Be sure to observe the following precautions to prevent operation failure, malfunction, or adverse effects on the
performance and functions of the product. Not doing so may occasionally result in unexpected events.
Use the product within specifications.
(1) The product is designed for indoor use only. Do not use the product outdoors. Do not use or store the product
in any of the following locations.
•Places directly subject to heat radiated from heating equipment.
•Places subject to splashing liquid or oil atmosphere.
•Places subject to direct sunlight.
•Places subject to dust or corrosive gas (in particular, sulfide gas and ammonia gas).
•Places subject to intense temperature change.
•Places subject to icing and condensation.
•Places subject to vibration and large shocks.
(2) Use/store within the rated temperature and humidity ranges. Provide forced-cooling if required.
(3) To allow heat to escape, do not block the area around the product.
Do not block the ventilation holes on the product.
(4) Be sure to wire properly with correct polarity of terminals.
(5) Use the specified size of crimped terminals (M3, width 5.8 mm or less) for wiring. To connect bare wires to the
terminal block, use copper braided or solid wires with a gage of AWG24 to AWG18 (equal to cross- sectional
area of 0.205 to 0.8231 mm
2
). (The stripping length is 6 to 8 mm.) Up to two wires of same size and type, or
two crimped terminals can be inserted into a single terminal.
(6) Do not wire the terminals which are not used.
(7) Allow as much space as possible between the controller and devices that generate a powerful high- frequency
or surge. Separate the high-voltage or large-current power lines from other lines, and avoid parallel or
common wiring with the power lines when you are wiring to the terminals.
(8) Use this product within the rated load and power supply.
(9) Make sure that the rated voltage is attained within two seconds of turning ON the power using a switch or relay
contact. If the voltage is applied gradually, the power may not be reset or output malfunctions may occur.
(10) Make sure that the Digital Controller has 30 minutes or more to warm up after turning ON the power before
starting actual control operations to ensure the correct temperature display.
(11) A switch or circuit breaker should be provided close to this unit. The switch or circuit breaker should be within
easy reach of the operator, and must be marked as a disconnecting means for this unit.
(12) Wipe off any dirt from the Digital Controller with a soft dry cloth. Never use thinners, benzine, alcohol, or any
cleaners that contain these or other organic solvents. Deformation or discoloration may occur.
(13) Design system (control panel, etc) considering the 2 second of delay that the controller’s output to be set after
power ON.
(14) The output will turn OFF when you move to the Initial Setting Level. Take this into consideration when
performing control.
(15) The number of non-volatile memory write operations is limited. Therefore, use RAM write mode when
frequently overwriting data during communications or other operations.
(16) When disassembling the Temperature Controller for disposal, use suitable tools.
(17) Do not exceed the communications distance that is given in the specifications and use the specified
communications cable. Refer to the E5@C-T Digital Controllers User’s Manual (Cat. No. H185) for the
communications distance and cable specifications.
(18) Do not turn the power supply to the Digital Controller ON or OFF while the USB-Serial Conversion Cable is
connected. The Digital Controller may malfunction.
(19) The terminals can reach temperatures of up to 75°C.
Precautions for Safe Use
Refer to the E5@C-T Digital Controllers User’s Manual (Cat. No. H185) for
detailed application procedures.
INSTRUCTION MANUAL
Thank you for purchasing the OMRON E5CC-T Digital Controller.
This manual describes the functions, performance, and
application methods needed for optimum use of the product.
Please observe the following items when using the product.
• This product is designed for use by qualified personnel with
a knowledge of electrical systems.
• Before using the product, thoroughly read and understand
this manual to ensure correct use.
• Keep this manual in a safe location so that it is available for
reference whenever required.
OMRON Corporation
©All Rights Reserved
Power supply voltage 100 to 240 VAC, 50/60 Hz or
24 VAC, 50/60 Hz / 24 VDC
Operating voltage range 85 to 110% of the rated voltage
Power consumption 7.5 VA max. (100 to 240 VAC)
4.1 VA max. (24 VAC)/2.3 W max. (24 VDC)
Indication accuracy Thermocouple:
(Ambient temperature: 23°C) (±0.3 % of indication value or ±1°C,
whichever is greater) ±1 digit max.
Platinum resistance thermometer:
(±0.2 % of indication value or ±0.8°C,
whichever is greater) ±1 digit max.
Analog input:
±0.2 % FS ±1 digit max.
Event input Output current: approx. 7 mA per contact.
Contact input ON:1 kȍmax., OFF: 100 kȍmin.
No-contact input ON: residual voltage 1.5 V max.,
OFF: leakage current 0.1 mA max.
Control output 1 Relay output :SPST-NO
250VAC, 3A(resistive load)
Electrical life of relay: 100,000 operations
Voltage output (for driving SSR):
12 VDC ±20%, 21 mA
Linear current output: 4 to 20 mADC, 0 to 20mA DC
Load: 500 ȍmax.
Control method 2-PID control
Auxiliary outputs Relay outputs:SPST-NO, 250 VAC,
2 A (resistive load),
Electrical life of relay: 100,000 operations
Transfer output 4 to 20 mA DC with load of 500 ȍmax.
1 to 5 VDC with load of 1 kȍmin.
Ambient temperature -10 to 55°C (Avoid freezing or condensation)
Ambient humidity 25 to 85%
Storage temperature -25 to 65°C (Avoid freezing or condensation)
Altitude Max. 2,000m
Recommended fuse
T2A, 250 VAC, time-lag, low-breaking capacity
Weight Approx. 120 g (Digital Controller only)
Degree of protection Front panel: IP66
Rear case: IP20, Terminal section: IP00
Installation environment Installation category II, pollution
degree 2 (as per IEC61010-1)
Memory protection Non-volatile memory
(Number of write operations: 1,000,000)
Temporary overvoltage Short term: 1200 V+ power supply voltage
Long term: 250 V+ power supply voltage
CAUTION
CAUTION
Minor injury due to electric shock may occasionally occur.
Do not touch the terminals while power is being supplied.
Electric shock, fire, or malfunction may occasionally occur. Do not allow metal objects, conductors,
cuttings from installation work, or moisture to enter the Digital Controller, the Setup Tool ports, or
between the pins on the connectors on the Setup Tool cable.
Do not use the product where subject to flammable or explosive gas. Otherwise, minor injury from
explosion may occasionally occur.
Never disassemble, modify, or repair the product or touch any of the internal parts. Minor electric
shock, fire, or malfunction may occasionally occur.
CAUTION - Risk of Fire and Electric Shock
a) This product is UL listed as Open Type Process Control Equipment. It must be mounted in an enclosure that
does not allow fire to escape externally.
b) More than one disconnect switch may be required to de-energize the equipment before servicing.
c) Signal inputs are SELV, limited energy.
d) Caution: To reduce the risk of fire or electric shock, do not interconnect the outputs of different Class 2 circuits.
If the output relays are used past their life expectancy, contact fusing or burning may occasionally occur.
Always consider the application conditions and use the output relays within their rated load and
electrical life expectancy. The life expectancy of output relays varies considerably with the output load
and switching conditions.
Loose screws may occasionally result in fire. Tighten the terminal screws to the specified torque of 0.43
to 0.58 N•m.
Set the parameters of the product so that they are suitable for the system being controlled. If they are
not suitable, unexpected operation may occasionally result in property damage or accidents.
A malfunction in the Digital Controller may occasionally make control operations impossible or prevent
alarm outputs, resulting in property damage. To maintain safety in the event of malfunction of the Digital
Controller, take appropriate safety measures, such as installing a monitoring device on a separate line.
EN
Safety Precautions
Key to Warning Symbols
Dimensions
When an error has occurred, the No.1 display shows the error code. Take necessary measure
according to the error code, referring the table below.
Check the setting of the Input Type parameter, check the input wiring,
and check for broken or shorts in the temperature sensor.
Turn the power OFF then back ON again. If the display remains the same, the
controller must be repaired. If the display is restored to normal, then a probable
cause can be external noise affecting the control system. Check for external noise.
After the check of Input error, turn the power OFF then back ON again. If
the display remains the same, the controller must be repaired. If the display
is restored to normal, then a probable cause can be external noise affecting
the control system. Check for external noise.
No.1 display Meaning
A/D converter error
*
Memory error
Input error
*
s.err (S. Err)
e111 (E 111)
Action
OFF
Alarm
Control
output
Status at error
OFF
OFF
Operates as above
the upper limit.
OFF
OFF
e333 (E333)
Error Display (troubleshooting)
Warning Symbols
Installation Connections (The applicability of the electric terminals varies with the type of machine.)
Specifications
Wiring
Names of Parts on Front Panel
• °C / °F : temperature unit
Either Cor Fis displayed when the displayed value
is a temperature.
•Mode key
Press this key to move across the items within the setting level.
Press this button for 1 second or longer for reverse scroll.
• Hold the Okey and the Mkey together for at least 3
seconds to switch to protect level.
•Level key
Use this key to change levels.
• Shift key (PF key)
Pressing this key operates the function that has been set
on "PF Setting" of the advanced function setting level.
The default PF Setting parameter is for shifting the digit.
• :
Lit when Setting Change Protect is
ON (disables the Up and Down Keys).
Operation Menu
Alarms
OMRON EUROPE B.V.
Wegalaan 67-69, NL-2132 JD Hoofddorp The Netherlands
Phone [phone]
FAX [phone]
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg, IL 60173-5302 U.S.A
Phone [phone]
FAX [phone]
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark, Singapore 119967
Phone [phone]
FAX [phone]
OMRON Corporation
Shiokoji Horikawa, Shimogyo-ku, Kyoto 600-8530 JAPAN
• Hold the Mkey and the Dkey together for at least 1
second to switch Run/Reset.
• The default alarm type is "2".
*1: Upper and lower limits can be set for parameters 1, 4 and 5 to provide for
different types of alarm. These are indicated by the letter "L" and "H".
*2: Refer to the tables above for details of input types and alarm types.
*3:
Only the value set to the ins: Temperature Input Shift parameter is applied to the
entire temperature input range. When the process value is 200°C, the process value is
treated as 201.2°C after input shift if the input shift value is set to 1.2°C. The process
value is treated as 198.8°C after input shift if the input shift value is set to -1.2°C.
*4: Operation is stopped when moved to the initial setting level.
(control/alarm are both stopped.)
*The grayed-out setting items are not displayed for some models and some
settings of other setting items.
Adjustment Level
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide
applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This
information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the
end product, machine, system, or other application or use. Buyer shall be solely responsible for determining
appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take
application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY
WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND
THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Suitability for Use
* Error shown only for "Process value / Set point". Not shown for other status.
If the input value exceeds the display limit (-1999 to 9999), though it is within the control range, [[[[ will be displayed
under -1999 and ]]]] above 9999. Under these conditions, control output and alarm output will operate normally. Refer
to the E5@C-T Digital Controllers User’s Manual (Cat. No. H185) for the controllable ranges.
stb
0.00
p
8.0
i
233
wt-b
off
ins
0.0
M
M
M
M
M
d
40
M
at
off
cmwt
off
spmd
psp
fsp
0
M
M
M
M
ol-h
100.0
ol-l
0.0
of-r
50.0
M
M
M
plcm
1234
M
ct1
0.0
hb1
0.0
M
M
Communications Writing
SP Mode
AT Execute / Cancel
100%AT Execute at-2
40%AT Execute at-1
Heater Current 1
Value Monitor
(Unit: A)
Heater Burnout
Detection 1
(Unit: A)
Fixed SP
PV
Input Shift *3
Wait Band
Integral Time
(Unit: Seconds)
Proportional
Band
Standby Time
Derivative Time
(Unit: Seconds)
Adjustment level is for entering set values and shift values for control.
Manual Reset Value
Clears the offset
during P or PD control.
MV Upper Limit
MV Lower Limit
Communications
Monitor
orl
0.0
M
MV Change
Rate Limit
Operation stopped.
(Control/alarm are both stopped.)
*4
Initial Setting Level
Use the following ranges for scaling: -1999
to 9999, -199.9 to 999.9, -19.99 to 99.99,
-1.999 to 9.999
Analog
input type
Current input
Voltage input
Do not connect anything to the terminals that are shaded gray.
Dimensions (mm)
The E5CC-T is set for a K thermocouple (input type
of 5) by default. If a different sensor is used, an input
error (s.err) will occur.
Check the setting of the Input Type parameter.
Check the wiring before turning ON the power supply.
*1
*1
*1
Alarm type
Vary with
"L", "H" values
Vary with
"L", "H" values
Vary with
"L", "H" values
No alarm function Output off
Deviation upper/lower limit
standby sequence ON
Absolute value upper limit
Absolute value lower limit
Absolute value upper limit
standby sequence ON
Absolute value lower limit
standby sequence ON
LBA (only for alarm 1)
Deviation lower limit
standby sequence ON
Deviation upper limit
standby sequence ON
Deviation upper/lower range
Deviation upper limit
Deviation upper/lower limit
Deviation lower limit
Alarm output function
Positive alarm value (X) Negative alarm value (X)
Setting
PV Change Rate Alarm
X
ON
OFF SP
X
ON
OFF SP
ON
OFF SP
X
X
ON
OFF SP
LH
ON
OFF SP
X
ON
OFF SP
X
ON
OFF SP
X
ON
OFF 0
ON
OFF
X
0
X
ON
OFF 0
X
ON
OFF 0
ON
OFF
X
0
X
ON
OFF 0
X
ON
OFF 0
X
ON
OFF 0
X
ON
OFF 0
X
ON
OFF 0
ON
OFF
X
0
ON
OFF
X
0
ON
OFF
X
0
ON
OFF
X
0
LH
ON
OFF SP
SP
ON
OFF
X
ON
OFF
X
0
1
0
2
3
4
5
6
7
8
9
SP absolute value upper limit
SP absolute value lower limit
14
15
MV absolute value upper limit
MV absolute value lower limit
16
17
10
11
12
13
SP
X
ON
OFF
ON
OFF
X
0
POWER ON
Input Type *2
Scaling Upper Limit
(only when setting
analog input)
Scaling Lower Limit
(only when setting
analog input)
Decimal Point
(only when setting
analog input)
Temperature
Unit
SP Upper Limit
SP Lower Limit
in-t
5
in-h
100
in-l
0
dp
0
d-u
c
sl-h
1300
4 to 20mA
0 to 20mA
1 to 5V
0 to 5V
0 to 10V
25
26
27
28
29
Setting range
Input type Input
Pt100
JPt100
Thermocouple
Infrared
Thermosensor
ES1B
K
J
T
E
L
U
N
R
S
B
W
PL II
Setting
10 to 70°C
60 to 120°C
115 to 165°C
140 to 260°C
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
17
18 12
15
16
1
2
13
14
3
11
4
6
7
8
9
10
5
Operation indicators 6
4
5
6
5
6
Pt
+
−
mA
−
+
5
4
Sensor Temperature/Analog Input
V
−5
V6
+
4
TC
4
I
(no polarity)
11
12
Input Power Supply
11
12
100 to 240 VAC 24 VAC/DC
(64)
85
60
4
144.8×44.8
Auxiliary Outputs
Auxiliary outputs 1, 2, and 3
7
8
9
10
Auxiliary output 2
Auxiliary output 3
Auxiliary output 1
+
+
−
16
17
18
13
16
17
18
13
14
15
18
16
17
065
Event inputs 1 to 4
064
Communications (RS-485)
and event inputs 3 and 4
13
066
Event inputs 1 and 2, and
transfer output
Options
061
Event inputs 1 and 2,
and CT1
V
I
14
15
14
15
EV1
EV2
EV1
EV2
EV3
EV4
EV3
EV4
B(+)
A(−)
RS-485
+
−
3
1
2
3
1
2−
One linear
current
One relay
3
Control Output 1
1
2
One voltage
(for driving SSR)
+
RX QX CX
Sold Separately
*Terminal cover (E53-COV23)
*USB-Serial Conversion Cable
(E58-CIFQ2)
In the pack:
*Main unit
*Instruction manual
*Watertight packing (Y92S-P8): c
*Adapter (Y92F-49): d
* Do not remove the terminal block. Doing so may result in failure or malfunction.
* A Setup Tool port is provided on the upper of the product. Use this port to connect a personal computer to the product when using
the Setup Tool. E58-CIFQ2 USB-Serial Conversion Cable is required to connect the personal computer to the product. (Do not use
the product with the USB-Serial Conversion Cable left permanently connected.)
Refer to the instruction manual provided with the USB-Serial Conversion Cable for details on connection methods.
•No.1 display
Process value or set data type
•No.2 display
Set point, set data read-out value or changed input
value
•Up and Down keys
Each press of Ukey increments or advances the
values displayed on the No.2 display.
Each press of Dkey decrements or returns the
values displayed on the No.2 display.
•TUNE:
Lit during AT (auto-tuning).
•CMW:
Lit when communications writing is
enabled and not lit when it is disabled.
Input Type
-200 to 850
-199.9 to 500.0
0.0 to 100.0
-199.9 to 500.0
0.0 to 100.0
-200 to 1300
-20.0 to 500.0
-100 to 850
-20.0 to 400.0
-200 to 400
-199.9 to 400.0
-200 to 600
-100 to 850
-200 to 400
-199.9 to 400.0
-200 to 1300
0 to 1700
0 to 1700
100 to 1800
0 to 2300
0 to 1300
0 to 90
0 to 120
0 to 165
0 to 260
-300 to 1500
-199.9 to 900.0
0.0 to 210.0
-199.9 to 900.0
0.0 to 210.0
-300 to 2300
0.0 to 900.0
-100 to 1500
0.0 to 750.0
-300 to 700
-199.9 to 700.0
-300 to 1100
-100 to 1500
-300 to 700
-199.9 to 700.0
-300 to 2300
0 to 3000
0 to 3000
300 to 3200
0 to 3200
0 to 2300
0 to 190
0 to 240
0 to 320
0 to 500
Platinum
resistance
thermometer
Temperature inputs
*The default is“5”.
*
s.err will be displayed when a platinum resistance thermometer is mistakenly connected while
input type is not set for it. To clear the s.err display, correct the wiring and cycle the power supply.
°C= c
°F= f
Initial setting level enables users to specify their preferred
operating conditions (input type, alarm type, etc.)
Operation Level
M
M
M
M
M
M
M
* When complying with EMC standards, the line connecting the sensor must be 30 m or less.
If the cable length exceeds 30 m, compliance with EMC standards will not be possible.
Individual mounting (mm) Side-by-side mounting (mm)
• Insert the main unit through the mounting hole in the panel (1 to 5 mm thickness). Insert the
mounting brackets (supplied) into the fixing slots located on the top and bottom of the rear
case.
• Tighten the two mounting screws on the top and bottom of the adapter to keep them
balanced, and finally tighten them to a torque of between 0.29 and 0.39 N·m.
• When more than one machine is installed, make sure that the ambient temperature does
not exceed the specified limit.
Waterproofing is impossible
with side-by-side
installation. When
waterproofing is required, fit
watertight packing on the
backside of front panel.
°C °F
CQR
cd
Solderless terminal size: M3
OUT1 OUT1 OUT1
A
B
B
Conformance to EN/IEC Standards
This is a class A product. In residential areas it may cause radio
interference, in which case the user may be required to take
adequate measures to reduce interference.
LH
ON
OFF
SP
Control output 1
Relay
250 VAC, 3 A (resistive load)
Voltage (for driving SSR)
12 VDC, 21 mA
Linear current
0 to 20 mA DC
Load: 500 ȍmax.
4 to 20 mA DC
Relay
250 VAC: 2 A
(resistive load)
48×48
• SUB1 to 3: Auxiliary outputs 1 to
3 indicators
• FSP:
Lit when the Fixed SP mode is
ON.
• OUT1: Control output 1 indicator
Lit for other than 0% output for
linear current output.
• RST:
Lit during a program reset.
• MANU:
Lit during Manual Mode.
• WAIT:
Lit during a program wait.
pru
m
pvst
sp
tspu
0
M
M
M
M
M
M
M
Control Period (Heating)
(Unit: Seconds)
*Voltage output
(for driving SSR): 2
cp
20
M
alt1
2
alh1
0.2
M
M
M
Transfer
Output Type
tr-t
off
Transfer Output
Upper Limit
tr-h
100.0
Transfer Output
Lower Limit
tr-l
0.0
Event Input
Assignment 1
Event Input
Assignment 2
Event Input
Assignments 3 to 4
Move to Advanced
Function Setting
Level
amov
0
Transfer Output
Signal Type
trst
4-20
M
M
M
M
ev-2
adv
ev-1
rr-1
M
M
ev-3
none
M
M
25
0
hold
off
ct1
0.0
pgsg
0.00
prg
0
a-m
r-r
rst
25
0
M
25
0
M
M
M
M
M
M
seg
0
M
M
stbm
0.00
prgt
0.00
M
M
rptm
0
M
styp
ramp
sp
0
M
pr
0
M
time
0.00
M
rpt
0
link
end
M
M
M
pid
1
M
MM
d.seg
end
U
Eend 0 to 7
s-no
8
M
M
7
6
5
4
3
2
1
d.prg
0
D
7
6
5
4
3
2
1
d.seg
0
al1l
0
M
al-1
0
al1h
0
M
M
of1
0.00
M
ts1s
0
on1
0.00
M
M
25
0
U
D
U
D
d.pid
1
M
Refer to the E5@C-T Digital Controllers User’s Manual (Cat. No. H185) for
information on the Advanced Function Setting Level, Manual Control Level, and
other functions.
Refer to the E5@C-T Digital Controllers Communications Manual (Cat. No. H186)
for information on communications.
Other functions
Protect Level
s.err is displayed when
connected sensor is
different from input type.
Process Value/
Set Point (1)
Process Value/
Set Point (2)
s.err is displayed when
connected sensor is
different from input type.
Auto/Manual Switch
PID control only.
Hold Oand
Mkeys down
for at least 1
second
Hold Oand Mkeys
down for at least
3 seconds
Program Setting Level
PID Setting Level
Press O
(less than 1 second)
Press O
(less than 1 second)
Press O(less than 1 second) Press O(less than 1 second)
Hold Odown for
at least 1 second
(No.1 display flashes, then the control stops.)
Hold Odown for at least 3 seconds
*2
Alarms 1 to 4 Type
Alarms 1 to 4
Hysteresis
Program Time Unit
Step Time/Rate of
Rise Programming
Time Unit of Ramp Rate
Reset Operation
Startup Operation
Operation End
Operation
PV Start
Program Number
Elapsed Program
Time Monitor
Program Execution
Repetition Monitor
Remaining Standby
Time Monitor
Segment Number
Hold
Program No. Monitor/
Segment No. Monitor
Heater Current 1
Value Monitor
(Unit: A)
Run/Reset
(of the program)
PID Set
No.
Alarm
Values 1 to 4
Alarm
Upper
Limits 1 to 4
Alarm
Lower
Limits 1 to 4
Number of
Segments Used
Display Program
Selection
Display Segment Selection,
END or 0 to Number of
Segments í1
Segment
n Format
(Only at
Slope Setting)
Segment
n SP
Segment n Slope
(Only at Slope
Setting)
Segment
n Time
Time Signals 1 to 2
Set Segment
Time Signals 1 to 2
ON Time
Time Signals 1 to 2
OFF Time
In this level, the SPs and times
are input for the programs.
For other information, refer to the E5@C-T
Digital Controllers User’s Manual
(Cat. No. H185).
Operation level should normally
be used during operations.
Program
Link
Destination
Program
Repetitions
Control Output
1 Signal
Press Ufor at least 1 sec.
in Program SP Mode
Display PID Selection
t-u
h-m
t-pr
time
rtsm
stop
p-on
cont
eset
rst
Control outputs Options
E5CC T M
13
14
15
16
17
18
EV1
EV2
CT1
+
+
-
All PID AT Upper
Limit SP
Transfer output
Conformance to Safety Standard
Reinforced insulation is provided between input power
supply, relay outputs, and between other terminals.
Do not allow temporary overvoltages on the primary circuit to exceed
the following values.
Check the power supply voltage to the Digital Controller.
Short-term overvoltage: 1,200 V + Power supply voltage
Long-term overvoltage: 250 V + Power supply voltage
Always externally connect the recommended fuse that is specified
in the Instruction Manual before you use the Digital Controller.
Analog Input
•
If you input an analog voltage or current, set the Input Type
parameter to the correct input type.
• Do not use the Digital Controller to measure a circuit with
Measurement Category II, III, or IV.
•
Do not use the Digital Controller to measure an energized circuit to
which a voltage that exceeds 30 Vrms or 60 VDC is applied.
The protection provided by the Digital Controller may be impaired if the
Digital Controller is used in a manner that is not specified by the
manufacturer.
sl-l
-200
Auxiliary outputs
o1st
4-20
PV/SP (1) (2) of
Operation
Level
−
+
+
−
+
+
−
+
+
−
+
+
orev
or-r
In Direct operation (Cooling)
=or-d
In Reverse operation (Heating)
=
or-r
Direct/Reverse Operation
M
Restricts which settings can be displayed or
changed, and restricts change by key operation.
oapt
0
pmsk
on
icpt
1
wtpt
off
pfpt
off
M
M
M
M
M
Operation /
Adjustment
Protect
Initial Setting /
Communication
Protect
Setting Change
Protect
Parameter Mask
Enable
PF Key Protect