Omron NY Series User manual

Industrial PC Platform
NY-series
NYE Industrial Panel PC
Conversion Guideline for NS-series products
From
NS15-££££-V2
NS15-££££B-V2
NS12-££££-V2
NS12-££££B-V2
NS10-££££-V2
NS10-££££B-V2
NS8-££££-V2
NS8-££££B-V2
NS5-££££-V2
NS5-££££B-V2
To
NYE2A-20S11-££WR1£00
P157-E2-01

NOTE
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or other-
wise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information contained
in this manual is subject to change without notice. Every precaution has been taken in the preparation
of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is
any liability assumed for damages resulting from the use of the information contained in this publica-
tion.
Trademarks
•Windows is a registered trademark of Microsoft Corporation in the USA and other countries.
•CFAST is a registered trademark of CompactFlash Association.
•Intel, the Intel Logo, Celeron and Intel Core are trademarks of Intel Corporation in the U.S. and/or
other countries.
Other company names and product names in this document are the trademarks or registered trade-
marks of their respective companies.
Copyrights
Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Introduction
You want to convert your NS-series Programmable Terminal to an NYE-series Industrial Panel PC.
This manual is relevant for the conversion from an NS-series product to an NYE-series product. After
the conversion this manual can be discarded because all required information is available in the Hard-
ware and Software manuals of the Industrial Panel PC.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing Factory Automation systems.
• Personnel in charge of designing Factory Automation systems.
• Personnel in charge of installing and maintaining Factory Automation systems.
• Personnel in charge of managing Factory Automation systems and facilities.
Applicable Products and Replacements
This manual covers the conversion from NS-series Programmable Terminal products to NYE-series
Industrial Panel PC products.
Discontinued Product Recommended Replacement Model
NS15-££££-V2 NYE2A-20S11-15WR1300
NS15-££££B-V2 NYE2A-20S11-15WR1200
NS12-££££-V2 NYE2A-20S11-12WR1300
NS12-££££B-V2 NYE2A-20S11-12WR1200
NS10-££££-V2 NYE2A-20S11-12WR1300
NS10-££££B-V2 NYE2A-20S11-12WR1200
NS8-££££-V2 NYE2A-20S11-09WR1300
NS8-££££B-V2 NYE2A-20S11-09WR1200
NS5-££££-V2 NYE2A-20S11-07WR1300
NS5-££££B-V2 NYE2A-20S11-07WR1200
Additional Information
Refer to 1-2 Product Configuration on page 1-3 for configuration details.
Introduction
1
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)

Introduction
2NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)

Sections in this Manual
Sections in this Manual
3
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
Conversion Procedures
Specifications
Installation
Hardware
System Configurations
Overview
1
2
3
4
5
6
1
2
3
4
6
5
1
7
A