
2Vision Systems
Cables Accessories
Specifications
Controller
Type Cable
length
Model
Camera
Cable*1
*1. It is necessary for ZFX-S and ZFX-SC. ZFX-SR_/SC_ is a cable drawing out
type, it doesn't use it.
Normal type 3m, 8m ZFX-VS
Robot cable type 3m ZFX-VSR
Camera
Extension
Cable
Normal type 3m ZFX-XC3A*2
*2. Up to two camera extension cables can be connected to the camera cable as
long as the total cable length between the controller and the camera does not
exceed 19 m.
8m ZFX-XC8A*2
Robot cable type 3m ZFX-XC3AR*2
Parallel I/O Cable 2m, 5m ZFX-VP
RS-232C Cable 2m ZFX-XPT2A
RS-422 Cable 2m ZFX-XPT2B
Monitor Cable 2m, 5m FZ-VM
Type Model
Console ZFX-KP (2m / 5m)
LCD Monitor FZ-M08
Panel Mount Adapters ZFX-XPM
Optional
Lighting*1
*1. It is possible to ZFX-SC50 and ZFX-SC90 use it.
bar lighting ZFV-LTL01
bar double-
lighting
ZFV-LTL02
bar low-angle
lighting
ZFV-LTL04
light source for
through beam
ZFV-LTF01
CCTV Lenses/Extension Tubes 3Z4S-LE series
External Lighting 3Z4S-LT series
Strobe Controller*2
*2. It is possible to ZFX-S and ZFX-SC use it. It uses it so that the controller may
control an external lighting.
Manufactured by
MORITEX Corporation
3Z4S-LT
MLEK-C100E1TSX
Item ZFX-C10 ZFX-C15
Number of connected cameras 1
Connectable camera ZFX-SR_/SC_/S/SC
Processing resolution When ZFX-SR_/SC_ is connected:464 (H) x464 (V)
When ZFX-S/SC is connected:608 (H) x464 (V)
Display LCD monitor 3.5" TFT color LCD (320 x 240 pixels)
Indicator "Measuring" indicator (color: green): RUN
Trigger indicator (color: blue): ENABLE
Judgment indicator (color: orange): OUTPUT
Error indicator (color: red): ERROR
Exter-
nal I/F
Parallel Interface Input 12 points (RESET, DSA, DI0 to 8, TRIG)
Output 22 points (OR, ERROR, RUN, ENABLE, GATE, STGOUT0, DO0 to 15)
Circuit type NPN PNP
Serial Interface USB2.0 1 port, FULL SPEED, MINI-B connector
RS-232C 1 port, max. 115200 bps (cannot be used simultaneously with RS-422 interface)
RS-422
1 port, max. 115200 bps (cannot be used simultaneously with RS-232C interface)
Network
communications
Ethernet 1 port, 100BASE-TX/10BASE-T
Monitor output Analog RGB output, 1 ch (resolution VGA: 640 x 480)
Memory card I/F SD card slot 1 ch
Operation I/F Touch panel, key operation, console connection
Main
functions
Number of registered banks 32 banks
Number of setup items 32 items/1 bank
Measurement
items
Shape inspection Pattern search, sensitive search
Size inspection Area
Edge inspection Position, width, count
Brightness/color inspection Brightness, HUE
Application-based
inspection
Defects
Postion correction 1 model search, 2 model search, position, area
Support Image memory function Max. 100 images
Menu language Japanese/English (can be switched)
Ratings Power supply voltage 21.6 to 26.4 VDC (including ripple)
Current consumption 1.5 A max.
Insulation resistance Across all lead wires and controller case: 20 M (by 250 V megger)
Dielectric strength Across all lead wires and controller case, 1000 VAC, 50/60 Hz, 1 min
E381-E1-01-X+ZFX+Datasheet.fm Seite 2 Freitag, 29. Juni 2007 6:02 18