ONAK Foldable Origami Canoe User manual

Foldable Origami Canoe
Manual

Watch the assembly video for more tips and tricks
www.onakcanoes.com/instructions

What´s in the box
1
Borders
female (6)
Wheels (2)
Wheel axle (2)
Wheel spacer (4)
Rib
Wheel split (2)
Origami Canoe
(folded)
Borders
male (4)
Small seat
Large seat

1. Unfold your ONAK
2
Topview
120 cm
515 cm
A
C: Nose strap
(bottom)
A
B
D D
E
C
C: Nose strap
(bottom)
B
DD E
C

2. Attach the borders
3
21
22 1 21
Put the borders through the straps and connect them
Male Female
Click the borders on both sides and tighten straps A and B
A
B B

Fold the nose and pull the
nose straps (C) on both ends
C
3. Fold the noses
4

Strap pulling tip
Pull the upper strap towards you and use
the other hand to help the pulling motion
4. Pull the straps and guide the sides
5
Fold the wing inwards and
then pull strap E fully
Pull strap B fully and guide the
side fold using your hand
Pull strap D alternately to shape the ONAK
to look the same as the drawing
3
1
2
A
B
D
E
C
wing

5. Insert the seats
Positions
6
Push the hooks forward so they are easy
to connect - place the lock in the opening
To change positions all
you need is a screwdriver
or a small coin
Put the seats in the canoe, start with
the big seat - connect one side first
1
2
Slide the hook forward to make mounting easier
high
middle
low

6. Insert the rib
7
Slide the rib towards the dented line on the bottom
It helps if you lift the bottom section of the rib
2
The hook at the end of the rib has to be placed
around the inner screw next to strap A
1

7. Final tightening of every strap
8
Tighten every straps B, C, E all the way to the end
and cross D as much as possible
Check whether every strap
is completely tightened
Sailing direction
2
1
Two persons
One person
A
B
D
E
C

8. Ready to paddle
9
On strap B and C the black buckle
needs to be close to the grey buckle

9. Pack your ONAK together
10
A
B
D
E
C
Release cross straps D1 Dismantle the
seats and rib
2
Loosen every strap3
Flatten the canoe hull and take o the borders4
Roll the canoe together5

10. Packing the canoe hull
11
Mount the bottom lid and turn the canoe around
Place the rib around the small seat and put one seat
on each side, the paddles and borders are next
Close the case by placing the top lid
Turn the canoe

Assemble the lids
12

Safety first
13
Our products are specifically designed with safety in
mind, but canoeing always involves certain risks.
Please know and follow the local regulations when
you go out on the water.
Always check the weather conditions.
We strongly advise the use of a life jacket. Check out
our webshop for a jacket that nicely matches our
canoe.
Always balance the weight distribution in your boat.
We are not liable for any accidents caused by the
use or misuse of the canoe. By using it, you accept
the risks and take responsibility.
Want to know more about the maintenance, the
warranty and the durability of the ONAK canoe?
Please check out the FAQ’s on our website!
Shared freedom
On onakcanoes.com we invite you to connect with
other users and exchange adventures.
Reach out and let us know what you think!
At ONAK we take feedback very seriously, as it helps
us enhance both the products we sell and the
services we provide.
www.onakcanoes.com
[email protected]