OnePlus One User manual

ONEPLUS ONE PATCH
64GB Global Version ONLY
Note: this patch is only applied to OnePlus One purchased from oneplus.net, OnePlus is not responsible for any
damages resulting from running this patch for OnePlus devices purchased from scalpers.
Back up your data.
Power Off your ONEPLUS ONE and remove the USB cable (if
connected).
Now Press and Hold Volume UP and Power Button. Your Device
should enter into fastboot Mode.
Now connect your phone to your computer.
Your computer should install the drivers automatically however we
have provided the USB drivers as well in this patch so that you can
manually install it if required. Please refer “ONEPLUS ONE
DRIVERS INSTALLATION” PDF.
Now run “ONEPLUS ONE – 0.bat”
You should get screen like this.

If you did not get this, it means that either your device is not
connected or it is not in fastboot mode or the drivers are not
installed.
Now Run “ONEPLUS ONE – 1.bat”
Your device may reboot after running this step, if it is rebooted
then, please put the device back in fastboot mode (Repeat step 1, 2
and 3). If the device is not rebooted then follow the next step.
Now Run “ONEPLUS ONE -2.bat”
It is done now 