
BLENDER CLEANING AND MAINTENANCE
Always clean your Optimum Nutrifroce Mini after each use for hygiene purposes and to ensure its longevity. Leaving food in the
blender is a health risk as bacteria can grow. It can also cause your cups to stain. Bacteria and residual food acids can also
damage the seals and shaft of the blades.
Switch o and unplug the blender from the power outlet.
Using a soft, damp cloth, wipe the surface of the blender's base. You can use a mild detergent to remove dried food if
required.
After each use, rinse the cup thoroughly with warm soapy water (not hot).
Place one or two drops of dish soap in your cup and fill halfway with warm water.
Blend one full cycle until the Nutriforce Mini comes to a stop.
Pour the contents out and rinse thoroughly.
Turn the cup upside down and let air dry.
The rubber seal sits within the blade base please ensure it remains in place throughout the cleaning process.
Use a dry soft cloth to thoroughly dry the blender.
Food Contact
Compliance
Keep Away
From Fire
Non-
microwavable
Fragile
1.
2.
3.
4.
5.
6.
7.
8.
9.
Read and follow all instructions and warnings in this manual carefully.
To protect against the risk of injury due to electric shock, do not immerse the base of the blender in water or any other liquid.
Store your Nutriforce M in a secure place, out of the reach of children.
Always be vigilant when using the blender in close proximity to children.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the
appliance
by a person responsible for their safety.
Do not touch any of the blender's moving parts and keep your hands away from the blender blades.
Always handle the blades carefully as they are quite sharp.
Do not operate the blender if it malfunctions or is damaged in any way. Return the appliance to the nearest authorized
service facility for inspection or repair.
NEVER place hot ingredients (above 65°C) into the blender. This can cause damage to the jar and base, including leaks.
Do not put carbonated ingredients in your Nutriforce M. This creates pressure in the jug and can lead to injury, or damage to
the blender (immediately or over time).
Do not put MCT oil (or powder) in the blender. Over time, this can damage the blender.
Do not remove the lid while operating. Ensure to only operate your Nutriforce Mini with the lid securely screwed on.
Do not run the Nutriforce when it is empty. Doing this can cause damage.
Do not add anything rigid to your blender when it is blending.
OPTIMUM NUTRIFORCE MINI // 8