Orgapack H-1275 User manual

OR 4000.16
OR 4500.13
Before using the tool,
read the operating
instructions carefully.
Combination tool for plastic strapping
09/07
H-1275

09/07
Page 2 of 3
ORGAPACK OR 4000.16 / OR 4500.13
Technical data
Weight 3.4 kg (7.5 lbs)
Strap tension Depending on breaking
strength of the strap
Sealing With seal
Plastic strap
Strap quality Polypropylene (PP)
Polyester (PET)
Strap width
– OR 4000.16 15–16 mm (5/8
")
– OR 4500.13 12–13 mm (1/2")
Thickness
– OR 4000.16 0.5–1.0 mm *
– OR 4500.13 0.5–0.8 mm**
Seals
– OR 4000.16 ORP 2300.16
– OR 4500.13 ORP 2100.13
*.019–.039", **.019–.031"
1Safety instructions
1. Inform yourself!
Before using the tool read the ope-
rating instructions carefully.
2. Protect yourself!
When operating the tool, wear eye-,
face- and hand protection (cutting
protected gloves).
3. Only strap packed goods!
Do not put hands or other parts of
the body between the strap and the
package.
4. Strap will snap forward when
cutting!
When cutting the strap, hold the
upper portion and stand a safe
distance away from the strap.
Caution:
the lower strap will snap
forward.
5. Strap could break during
tensioning!
Do not stand in line with the strap
while it is tensioned.The strap could
break!
6. Original seals
Only use original ORGAPACK seals.
7. Original ORGAPACK spare parts!
Only original ORGAPACK spare
parts may be used.
2
Fig. 1.
2
1
Operating
3
Adjusting strap thickness
Before setting the tool into
operation, make sure that
the tool has been adjusted
to the correct thickness of
strapping in use.
Fig. 1
Insert strap and tension it.
–
w
e
r
cs
t
e
sn
r
u
tn
o
it
i
d
n
o
c
de
n
o
i
s
n
e
t
nI
–
(Fig.1/1) up to the clamp frame
(Fig.1/2).
nipd
e
d
a
e
r
hte
h
t
,s
pi
l
sp
a
r
t
se
h
t
fI
–
must loosened
1/4–
1/2rotation.
ORGAPACK
Original
.7
jklsfjklsdjš
lksdfjkl
jkljsdllkjjkljsd
fkljjklkjkljsdafj
asdfjklkjjkljklj
ksldafkjkljklš
jkljklkljsdafjlkj
jkljjkljklkljljlk
1.
.
3
.5
2.
.
4
ORGAPACK
Original
6.

ORGAPACK OR 4000.16 / OR 4500.13
2.
1. 3.
09/07
Page 3 of 3
4. 5.
Operating
Fig. 1
– Slide seal from the front into the tool
up to the stop with the opening of the
seal facing outwards.
Fig. 2
Place the strap around the package.
–
– Press lever down to the stop. Insert
strap into seal, under cutter and
clamp plate. Release lever.
Fig. 3
Pull strap from dispenser and lead–
around package. Insert strap into
seal, cutter and windlass.
Move the letter backwards and for-–
wards until desired strap tension is
reached.
Fig. 4
– Press button at the rear of the lever.
Do not hold button
.
– Use a little force (approx. 35 lbs/
150 N) to move lever backwards
forwards until seal is completely
closed. More force cannot obtain a
better closing but it can damage the
tool.
Fig. 5
– Press lever down to the stop. Do
not hold button at the rear of lever.
Turn tool away from the seal.
Maintenance note
Periodically lubricate all moving parts
with one or two drops of light machine oil.