OVE MADISON 60 User manual

12015-09-23 2800 Etienne Lenoir, Laval
Québec H7R 0A3 Canada
Purchase date: _________________________ Product Tracking Reference: ________________________
Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at
1-866-839-2888, 9 a.m. - 5 p.m., EST, Monday - Friday
MADISON 60
78 3/4”
[2000]
Rough-in
60”
[1524]
Wall-to-Wall
58 3/16”
[1478]
Opening
24 13/16”
[630]
7 1/16”
[180]
CSA Markings
27 1/2”
[699]
32 5/8”
[829]
Measures: inch [millimeter]

2
TABLE OF CONTENT
PACKAGE CONTENT...........................................................................................................................................4
HARDWARE CONTENT.......................................................................................................................................5
TOOLS REQUIRED..............................................................................................................................................5
SAFETY INFORMATION......................................................................................................................................6
PREPARATION.....................................................................................................................................................6
SHOWER REVERSIBILITY..................................................................................................................................7
WALL TO WALL MEASURES..............................................................................................................................7
BASE INSTALLATION GUIDELINES (OPTIONAL)............................................................................................8
FIXED PANEL INSTALLATION............................................................................................................................9
SUPPORT BAR INSTALLATION.......................................................................................................................10
DOOR PANEL INSTALLATION..........................................................................................................................12
CABINET INSTALLATION................................................................................................................................ 14
HANDLE INSTALLATION & SEALING............................................................................................................17
CARE AND MAINTENANCE.............................................................................................................................18
LIMITED 5 YEARS WARRANTY........................................................................................................................18

3
PACKAGE CONTENT
C
G
D
E
K
B
F
L
S
H
I
J
T
M
N
Q
V
U
R
V1
O

4
PACKAGE CONTENT
PART# DESCRIPTION QTY CODE
B Wall track 1 99STR1018-WM
C Fixed panel 1 99SG20602-WM
D Support bar’s anchor 2 99SGC1007-WM
E Shower door stopper 2 99SDS0001-WM
F Support bar 1 99SGS1005-WM
G Fixed panel’s bracket 2 99SGC1008-WM
H Door roller 4 99SWE0003-WM
I Glass panel clamp 1 99SGC1010-WM
J Door panel 1 99SGD0602-WM
K Fixed panel’s bottom seal strip 1 99SRU0033
L Glass panel’s vertical seal strip 2 99SRU0024
M Door handle 1 99SHA1009-WM
N Door panel vertical seal strip 1 99SRU0023
O Door bottom seal strip 1 99SRU0034
QDoor guide (with its rubber tting) 1 99SGC1009-WM
R Decorative cap 2 99SHW1151-WM
S Decorative track 1 99STR1024-WM
TCabinet xed panel 1 99CSP0002-WM
U Glass shelf 3 99CGS0002-WM
VShelf support 3 99SGC0047-WM
V1 6 99SGC1001-WM
W Hardware content 1 99SHW602S-WM

5
HARDWARE CONTENT
DD
IIHH
AA
GG
CC
Screw
ST5x25mm
4+1
Wall Anchor
ø8x30mm
5+1
Screw
ST5x30mm
3+1
Cap
3x
Fitting
3x
TOOLS REQUIRED
Pencil Screwdriver Drill with ceramic tile bits
ø1/8” (3mm) & ø1/4” (6mm) & ø5/16” (8mm) Level
Measuring Tape Silicone Rubber mallet Cutter
Safety glasses
Screw
ST5x40mm
2+1
EE
Screw
ST4x12mm
3+1
Allen key
2mm & 2.5mm & 4mm & 5mm
Ratchet
5mm Bit socket
FF
Screw
ST4x30mm
6+2
BB
Wall Anchor
ø6x30mm
6+2

6
Please read and understand this entire manual before attempting to assemble, operate
or install the product.
WARNING
• Distributor is not responsible for any damage to the unit or personal property caused
by improper installation. If you disregard instructional warnings, you will void your
warranty and possibly deal with water damage.
CAUTION
• Carefully remove product from packaging and keep packaging until installation is
complete.
• Inspect all parts for damage; if there is damage to the unit prior to installation,
please contact customer service at the number provided in this guide.
• Install the shower on a oor that is level and able to accommodate the weight of the
unit and an occupant.
• Please, consult local building codes and compliance standards prior to installation
and ensure conformity.
SAFETY INFORMATION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Estimated Assembly Time 60min.
Handle the tempered glass with caution! Improperly handling the glass can
cause it to break suddenly in small pieces (never in pointed fragments).
Dot NOT put glass panels on hard surfaces, always work on clean and soft
surface (e.g. towel). Shattering may occur otherwise!
HEAVY PRODUCT! You will need at least two people to install this
unit properly.

7
• This instruction is drawn up for an opening from right to left (see illustration A).
• For an installation from left to right (see illustration B), use the same instructions, but switch around the
panels: mirror effect.
SHOWER REVERSIBILITY
WALL TO WALL MEASURES
A B
Install the shower head on the door’s side! This will reduce the risk of leaking.
• Measure the thickness of your tiles on either side before installing the metal tracks. A thicker tile will limit
your space to install the shower panels.
• Make sure to have a tile to tile distance (D) between 1478mm (58 3/16 in) min. and 1493mm (58 3/4 in)
max. (see image).
Make sure to have a distance (D) from the left side tile
to the right side tile:
D Min: 1478mm (58 3/16 in)
D Max: 1493mm (58 3/4 in)
If D < 1478mm (58 3/16 in) you can cut the support
bar to adequate size. Only cut the side with no holes!

8
BASE INSTALLATION GUIDELINES (OPTIONAL)
1 2
4
Tile wall
Studs
Drywall
Silicone
5
Shower Base
3
Shower Base
Cement
Floor
Wood shim
Flange
Stud
Flange
Drywall
Silicone

9
1-2. Insert the xed panel’s bottom seal strip (K) at the base of the xed panel (C). Cut the surplus part with a cutter to
size, about 1 9/16” (40mm) from the panel’s edge.
3. Place the glass panel clamp (I) and the sliding door guide (Q) on the base. Mark the positions of holes of the glass
panel clamp (I) and sliding door guide (Q).
4. Drill a pilot hole for the glass panel clamp (I) and sliding door guide (Q) using a ø1/8” (3mm) drill bit.
5-6. Install the glass panel clamp (I) and sliding door guide (Q) with the screw (DD).
7. Place the xed panel (C) into the glass panel clamp (I) and the sliding door guide (Q).
FIXED PANEL INSTALLATION
K
K
C
3
1
I
Q
2
C
K
4
7
1 9/16”
40mm
1 9/16”
40mm
27 1/2”
699mm
9/16”
15mm
ø1/8”
3mm
56
Q
IQ
C
DD DD
Helpful Hint
Add a drop of
silicone in the
holes before
inserting the
screws

10
SUPPORT BAR INSTALLATION
1. Slide the 2 stoppers (E) and the 2 support bar’s anchors (D) onto the support bar (F).
2. Loosely mount the support bar (F) onto xed panel (C) using the brackets (G) and level it.
3. Mark the outline of the 2 support bar’s anchors (D) on the wall.
4-5. Completely remove the support bar (F).
6. Place the 2 support bar’s anchors (D) back on their wall mark, then mark their center on the wall.
D
2
D
3 4
6
5
D
1
E
F
D
E
C
GF

11
SUPPORT BAR INSTALLATION
1-3. Drill a hole on the center marks with a ø5/16” (8mm) drill bit and insert the wall anchors (AA) using a rubber
mallet. Fix the center tting on the support bar’s anchor (D) using the screws (CC).
4. Slide again the roller stoppers (E) and the support bar’s anchors (D) onto the support bar (F). Then x the support
bar to the wall.
5-6. Fix the xed panel (C) onto the support bar (F) using the brackets (G). Secure the support bar (F) on their
anchors using the provided hex screws.
21
CC
3
D
E
F
4
6
5
ø5/16”
8mm AA
C
GF

12
1. Install the 2 top door rollers (H) on the door panel (J). Adjust the level of the glass panel using the eccentric
mechanism of the rollers. Use a ratchet to strongly tighten the blots.
2. Insert the door bottom seal strip (O) onto the door panel (J).
3-4. Gently hang the door panel by its 2 top rollers on the support bar (F) and make sure to place the bottom of
the door inside the guide (Q).
5. Install the other 2 door rollers (H) on the door panel (J). Use a ratchet to strongly tighten the bolts.
DOOR PANEL INSTALLATION
J
2
O
4
3
H
J
F
J
H
J
5
H
1
Q

13
1-2. Install the 2 glass panel’s vertical seal strips (L).Cut the surplus part with a cutter.
3. Install the door’s vertical seal strip (N) on the closing end.
4. Using silicone, install the decorative track (S) in front of the door panel. Slide the decorative caps (R) onto
the track.
DOOR PANEL INSTALLATION
R
S
12
4
3
LJ
C
J N

14
1. Level the track (B) and mark the track holes’ positions.
2. Remove the track and drill pilot holes in the marked locations with a ø5/16” (8mm) drill bit.
3. Insert the wall anchors (AA) using a rubber mallet until the wall anchors are ush with the wall.
4. Replace and secure the track (B) with screws (EE). Do not overtighten.
CABINET INSTALLATION
ø5/16”
8mm
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
AA
2
3
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
6 7/8”
175mm EE
4
B
1

15
1. Insert the cabinet xed panel (T) into the wall track (B).
2-3. Drill the cabinet xed panel (T) with ø1/8” (3mm) in 3 places. Secure the wall track (B) using screws (GG),
ttings (II) and caps (HH).
CABINET INSTALLATION
1
II
GG
HH
2
3
B
Tø1/8”
3mm
T
T

16
1. Install the shelf supports (V) onto the cabinet xed panel (T)
2. Place the shelf supports (V1) and the glass shelves (U) to the shelf supports (V).
3. Mark the outline of the shelf supports (V1) on the wall.
4. Remove the supports and the glass shelves and drill pilot holes in the marked locations with a ø1/4” (6mm)
drill bit.
5. Insert the wall anchors (BB) using a rubber mallet until the wall anchors are ush with the wall.
6. Fix the shelf supports (V1) with screws (FF).
7. Insert the glass shelves (U) into the shelf supports (V & V1).
CABINET INSTALLATION
12
3
BB
567
ø1/4”
6mm
4
FF
V
V1
U
V1
V1
U
T
V
V

17
HANDLE INSTALLATION & SEALING
1. Install the door handle (M) on both sides using Allen keys.
2. Ensure that the door closes tightly and opens smoothly, and that there is a tight connection between the side
glass panels and the frame as well as the support bar.
Apply a clear silicone water sealant around the outside perimeter of any xed shower components (horizontally
between bottom of xed side glass panel and base, as well as vertically between the wall, glass frames, and
any side glass panel).
Allow 24 hours for silicone to dry.
Improper application of silicone sealant may cause your shower to leak.
2
M
1

18
CARE AND MAINTENANCE
For the daily maintenance, use a wet cloth and a soft liquid cleaner.
Never use abrasive cleaners containing some acetone, chlorine or strong bleach, scrapers, metallic brushes,
nor other objects or the products which can graze or tarnish surfaces.
Use a ratchet to strongly tighten any bolts used to support the xed glass panels or doors panel (support bolts
can withstand up to 250 lbf*in of torque).
Check these bolts every 4 months and re-tighten them if necessary.
LIMITED 5 YEARS WARRANTY
This warranty extends only to the original owner lend-user for personal household use only. For commercial
uses, additional limitations may apply.
Distributor warrants your satisfaction with each shower. Should any shower not meet your satisfaction due to
a visual defect, simply return it to your retailer with the original packaging, PRIOR TO INSTALLATION, for a
replacement.
Distributor warrants shower doors to be free from defects in workmanship and materials under normal use and
service for a period of ve (5) years.
Distributor warrants acrylic surface against blistering or cracking and chipping resulting from defect in the
acrylic surface material when used under normal conditions and service for a period of ve (5) years from
purchase date.
Distributor further warrants the structure of the acrylic shell against loss of water through berglass laminate of
the acrylic body as a result of defect in materials and workmanship for a period of ve (5) years from purchase
date.
Distributor warrants, shower hardware (handles, hinges, rubber support clips, metal support bars and wall
tracks) to be free from defects in workmanship and materials under normal use and service for a period of one
(1) year.
Distributor will, at its election, repair, replace, or make appropriate adjustment where distributor optional
inspection discloses any such defects occurring in normal usage within the warrantee periods.
Please note distributor is not responsible for installation or removal costs.
Modication of any shower enclosure components may void the warranty. This warranty does not cover any
claim arising from abuse, misuse, negligence, accident, improper installation or operations on the part of the
purchaser. This warranty is void if the distributor product is subject to alterations, or if repairs where done to the
shower unit.
This warranty does not extend to any plumbing or components installed by dealers, installers or by any party
other than distributor.
Implied warranties, including that of merchantability or tness for a particular purpose, are expressly limited in
duration to the duration of this warranty.
Distributor disclaims any liability for special, incidental or consequential damages.

19 2800 Etienne Lenoir, Laval
Québec H7R 0A3 Canada
2015-09-23
Date de l’achat: _______________________ Numéroderéférenceduproduit:______________________
Questions, problèmes ou pièces manquantes?
Avant de retourner le produit à votre détaillant, contactez notre service à la clientèle au
1-866-839-2888, du lundi au vendredi de 9h00 à 17h00 HNE.
Mesures: pouces [millimètres]
MADISON 60
78 3/4”
[2000]
Ouverture
60”
[1524]
Mur-à-Mur
58 3/16”
[1478]
Ouverture
24 13/16”
[630]
7 1/16”
[180]
Marques CSA
27 1/2”
[699]
32 5/8”
[829]

20
TABLE DES MATIÈRES
CONTENU DE L’EMBALLAGE ......................................................................................................................... 22
QUINCAILLERIE FOURNIE .............................................................................................................................. 23
OUTILS REQUIS ............................................................................................................................................... 23
INFORMATION SUR LA SÉCURITÉ ................................................................................................................. 24
PRÉPARATION ................................................................................................................................................. 24
CETTE DOUCHE EST RÉVERSIBLE ............................................................................................................... 25
MESURES MUR À MUR.................................................................................................................................... 25
GUIDE D’INSTALLATION DE LA BASE (OPTIONNEL) ................................................................................. 26
INSTALLATION DU PANNEAU FIXE ................................................................................................................ 27
INSTALLATION DE LA BARRE DE SUPPORT ................................................................................................ 28
INSTALLATION DE LA PORTE ........................................................................................................................ 30
INSTALLATION DE L’ARMOIRE À TABLETTES..............................................................................................32
INSTALLATION DE LA POIGNÉE ET SCELLAGE ........................................................................................... 35
TRAITEMENT ET ENTRETIEN ......................................................................................................................... 36
GARANTIE LIMITÉE DE 5 ANS ........................................................................................................................ 36