Owon 306 User manual

Water Leakage Sensor
Quick Start Guide

2
Introduction
1
The Water Leakage Sensor uses an extra low power
consumption ZigBee wireless module, and features
a long battery life. The separate design of body and
sensor makes it able to be mounted to keep the main
body safe away from moisture.
This guide will provide you with an overview of the
product and help you get through the initial setup to
installation.

3
2Get to know your device
Reset button
Battery pull tab
Reset button
• Join the ZigBee gateway. Press and hold the reset
button for two seconds until the LED indicator rapidly
flashes yellow to join the gateway.
• Reset. Press and hold the reset button for five
seconds until the LED indicator flashes yellow six times
to reset the sensor to default factory setting.
Battery pull tab
Power on Water Leakage Sensor. Pull out the battery
pull tab to power on the sensor.
LED indicator

4
3Get started
3.1 To get started, you will need:
A SEG-X3 Smart Gateway
The mobile phone
3.2 Connect to gateway’s network
1. Set your gateway to permit pairing.
2. Power on the Water Leakage Sensor. Use a pin to
press the reset button in the Water Leakage Sensor for
two seconds until the LED rapidly flashes yellow, the
sensor will join the gateway’s network. The LED light
will turn solid for a while when it has successfully
added.
3. Now you can see the Water Leakage Sensor under
"Security" in the mobile App.

5
3.3 Mounting instructions
1. Make sure that the surface is clean to ensure good
bonding.
2. Peel off the liner on the double-sided tape and place
the bracket to the wall.
3. Mount the sensor to the bracket.
Please refer to the mounting example below.
Mounting examplePeel off the liner

6
3Technical Specifications
Battery
• Voltage: DC3V
• Type: 2 AAA batteries
• Standby/Alarm current:
<=5uA/<=30mA
Working Temperature • -10°C~+50°C
Humidity • <=95%RH
Networking Mode • ZigBee Ad-Hoc Networking
Networking Distance • <=100m (open area)
Dimensions • Body: 76x36.6x16.5mm
• Sensor: 28.3x26.5x12.2mm

7
4Safety Notice
WARNING: Failure to follow these safety notices
could result in fire, electric shock, other injuries,
or damage to the Water Leakage Sensor and other
property. Read all the safety notices below before
using the Water Leakage Sensor.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong
ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to
flammable liquids, gases or other explosives.