Owon WSP408 User manual

WSP408 Smart Plug UK
Quick Start Guide

2
Introduction
1
The WSP408 ZigBee Smart Plug monitors the energy
usage of connected appliances. It allows you to turn
these devices on and off remotely as well as set on/off
schedules from the mobile app.
This guide will provide you with an overview of the
product and help you get through the initial setup.

3
2Get to know your device
1. On/off button
• On/off control. Press to turn on/off the socket.
• Reset. Press and hold the Reset button for ten
seconds (The LED indicator will flash three times
at three seconds, and flash again three times at ten
seconds). The indicator will keep flashing when the
device is returned to default factory setting.
• Pair mode. Press and hold the on/off button for about
three seconds until the LED indicator flashes three
times to pair the socket with another device.
1

4
2
2. LED indicator
The LED status gives the following information:
LED status What it means
LED keeps ashing The device has not joined a
network or it is in pairing mode
Purple LED Device is ON
Blue LED Device is OFF

5
3Get started
3.1 To get started, you will need:
A ZigBee Gateway
The mobile app.
3.2 Connect to gateway’s network
1. Set your gateway to permit joining.
2. Plug in the smart plug and the LED indicator will
start flashing (reset it if not).
3. The smart plug will join the gateway automatically
and the LED indicator will turn steady when it joined
successfully.
Note: If the smart plug fails to join the gateway's
network within one minute, simply reset it and retry.

6
3.3 Plug the appliance into the smart plug
Plug your appliance into the smart plug’s socket, so you
can remotely switch it on/off as well as check real-time
energy usage via your mobile App.

7
4Technical Specifications
Wireless connectivity • ZigBee 2.4GHz IEEE 802.15.4
ZigBee profile • Home Automation Profile
Range outdoor/indoor • 100m/30m
Power • 100-240V~ 50-60Hz
Weight • 120g
Calibrated Metering
Accuracy
• <=100W Within ±2W
• >100W Within ±2%
Dimensions • 86x86x35mm
Max. Load Current • 220AC 10A 2200V
Working environment • Altitude up to 2000m
• Temperature -10ºC-55ºC ( ≦90%)
Weight • 85g

8
5Safety Notice
WARNING: Failure to follow these safety notices
could result in fire, electric shock, other injuries, or
damage to the smart plug and other property. Read
all the safety notices below before using the smart
plug.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong
ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to
flammable liquids, gases or other explosives.