Pacific Casual Terra Linda 211-H41-9D User manual

Questions, problems, missing parts? Before returning to the store,
call Our Customer Service
7.30 a.m. ~4.30p.m.PST, Monday - Friday,
888-445-6690
[email protected]
Model # 211-H41-9D
USE AND CARE GUIDE
Terra Linda 9pc Cushioned Dining Set
(4 Chairs)
Ver: 10-08-2021

2
Table of Contents
Care & Cleaning
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat frame with one step liquid wax for maximum protection against
UV light and salty, damp air. When not in use, store furniture in a cool, dry place. If your set includes cushions, they may be cleaned by hand
with a mild solution of soap and water. Rinse cushion thoroughly and allow to drip dry. Do not machine wash or tumble dry, as cushions
may shrink. Do not use bleach or solvents on fabrics.
When cleaning the tabletop make sure to use a soft, clean cloth that doesn’t
bleed color as well.
Table of Contents .......................................................2
Important Safety Instructions ............................................2
Pre-Assembly....................................................................3
Planning Assembly ................................................................3
Hardware Included.................................................................. 3
Package Contents .................................................................... 3
Assembly..... ........................................................................4
................................................................ 2
Care & Cleaning ..
.... .
....
..
Important Safety Instructions
IMPORTANT: Please check the tightness of the bolts
periodically.
CAUTION: Use the table and chairs on flat ground only.
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
When using a furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this furnishing.
To reduce the risk of injury to persons:
a) Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
b) Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

3
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 40 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA 16
BB Bolt (M6x32)16
32
CC
Bolt cap (M6)
Hex wrench
32
DD
AA BB CC EE
Part Description Quantity
A
Left armrest
BBack panel
D
Seat panel
Seat pad 4
E
ABD
#1
C
Right armrest
C
Washer (M6)
DD
1
EE
Bolt (M6x38)
PACKAGE CONTENTS
#2
Back cushion 4
F
4
4
4
4

4
Assembly
1Attaching the right armrest
2Attaching the left armrest
□Place the right armrest (C) on its side on a flat, smooth surface.
□Attach the seat panel (A) to the armrest with washers (CC) and bolts (BB) using hex wrench (EE).
□Attach the back panel (B) to the armrest with washers (CC) and bolts (AA) using hex wrench (EE).
□Place the left armrest (D) on its side on a flat, smooth surface.
□Attach the seat panel (A) to the armrest with washers (CC) and bolts (BB) using hex wrench (EE).
□Attach the back panel (B) to the armrest with washers (CC) and bolts (AA) using hex wrench (EE).
B
A
AA
BB
CC
CC
C
C
D
DAA
BB CC
CC

5
Assembly
3Attaching bolt caps
4Placing cushions
Place cushions (1 and 2) on the chair and secure the seat cushion
to the frame with hook and loop straps.
□Repeat steps 1 through 4 for the other dining chairs.
□
□Cover all bolts (AA) and (BB) with bolt caps (AA).
H
H
2
1