Pacific Casual Tiara 183-W5A-SDC2 User manual

1/4
Customer Service:
Toll Free: 888-445-6690 (7:30 am to 4:30 pm PST, Monday to Friday)
Supplier: Pacific Casual L.L.C.
Address: 1060 Avenida Acaso, Camarillo, CA 93012
E-Mail: [email protected]
ASSEMBLY INSTRUCTIONS
ITEM NUMBER: 183-W5A-SDC2
ITEM NAME: Tiara Garden 1-Pair Swivel Dining Chairs

PRE-ASSEMBLY PREPARATION:
2/4
!THIS PACKAGE MAY CONTAIN SMALL ITEMS WHICH SHOULD BE KEPT AWAY FROM CHILDREN
•Please check that all parts and hardware are included before beginning assembly.
•Save all packing materials until assembly is complete to avoid accidentally discarding smaller
parts or hardware.
•Read through the preparation and assembly instructions in full before beginning assembly.
•Please use CAUTION AND CARE WHEN LIFTING the product to avoid personal injury and
(or) damage to the product.
•For ease of assembly, two adults are recommended.
MAINTENANCE AND CARE TIPS FOR OUTDOOR
FURNITURE:
When cleaning the funiture make sure to use a soft, clean cloth that doesn’t bleed color.
When the furniture is not in use, cover it with furniture cover and put it into a cool, dry place.
•
•
•
•
•
Cushion fabric may be cleaned by hand with a mild solution of soap and water. Rinse the cushions thoroughly and
allow to air dry. Do not machine wash or tumble dry, as the cushions may shrink. Do not use bleach or solvents on
fabrics.
••

:TSILTRAP
3/4
A
B
C
D
E
F
H
I
J
K
Part No. Illustration Description Quantity
4
8
16
16
8
8
8
2
M8
Washer
Nut
Bolt Cover
Spanner
M8X45MM
Bolt
Washer plate
M8
Lock washer
Nut Cover
2
2
Seat
Base
#1
#2
Back cushion
Seat cushion
2
2

4/4
STEP-BY-STEP ASSEMBLY:
1
B
A
I
D
E
F
C
J
H
C
E
I
D
E
F
C
J
H
F
C
E
Place the chair base (B) on a flat, smooth surface.
Place the U-bar (1) of the chair seat (A) onto the triangular plate (2) of the chair base (B).
Make sure they properly line up.
Secure the U-bar and the triangular plate with washer plates (C), washers (E), lock washers (F) and
bolts (D) from above the U-bar, and also with washer plates (C), washers (E), lock washers (F) and
nuts (H) from below the triangular plate using spanners (K).
Fully tighten all the bolts and nuts.
Cover all the bolts (D) with bolts covers (I).
Cover all the nuts (H) with nut covers (J).
Place cushions (#1) and (#2) on the chair.
Repeat this for the other chair.
1
2
Front
#1
#2
2
F