Panasonic AJHDP2000 - 2K PROCESSOR User manual

2K Processor
Operating Instructions
Model No. AJ-HDP2000P
Before operating this product, please read the instructions carefully and save this manual for future use.
F0707N0 -F @
Printed in Japan VQT1F04
ENGLISH

2
Read this first
!
indicates safety information.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
ONLY.
FCC Note:
This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Warning:
To assure continued FCC emission limit compliance, the
user must use only shielded interface cables when
connecting to external units. Also, any unauthorized
changes or modifications to this equipment could void
the user’s authority to operate it.
CAUTION:
In order to maintain adequate ventilation, do not
install or place this unit in a bookcase, built-in
cabinet or any other confined space. To prevent risk
of electric shock or fire hazard due to overheating,
ensure that curtains and any other materials do not
obstruct the ventilation.
CAUTION:
z KEEP THE TEMPERATURE INSIDE THE RACK
BETWEEN 41°F to 104°F (5°C to 40°C).
zBOLT THE RACK SECURELY TO THE FLOOR
SO THAT IT WILL NOT TOPPLE OVER WHEN
THE UNIT IS DRAWN OUT.
CAUTION:
The mains plug of the power supply cord shall
remain readily operable.
The AC receptacle (mains socket outlet) shall be
installed near the equipment and shall be easily
accessible. To completely disconnect this
equipment from the AC mains, disconnect the mains
plug from the AC receptacle.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER CHANGES OF SWITCH
SETTINGS INSIDE THE UNIT TO QUALIFIED
SERVICE PERSONNEL.
_DO NOT REMOVE PANEL COVERS BY
UNSCREWING THEM.
To reduce the risk of electric shock, do not remove
the covers. No user serviceable parts inside.
Refer servicing to qualified service personnel.
_THIS EQUIPMENT MUST BE GROUNDED
To ensure safe operation, the three-pin plug must be
inserted only into a standard three-pin power outlet
which is effectively grounded through normal
household wiring. Extension cords used with the
equipment must have three cores and be correctly
wired to provide connection to the ground. Wrongly
wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power outlet is grounded or
that the installation is completely safe.
For your safety, if you are in any doubt about the
effective grounding of the power outlet, please
consult a qualified electrician.
WARNING:
zTO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
zTO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY
FROM ALL LIQUIDS. USE AND STORE ONLY
IN LOCATIONS WHICH ARE NOT EXPOSED
TO THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.

3
Table of Content
s
Read this first! ............................................................................................... 2
Operating Precautions ................................................................................. 4
Overview/Features ........................................................................................ 5
1. Overviews ........................................................................................................5
2. Features ..........................................................................................................5
2.1. Compression .............................................................................................5
2.2. VTRs Migration .........................................................................................5
2.3. Dual-Link SDI & I/O ...................................................................................5
2.4. Maximum Record Time .............................................................................5
2.5. Indicator Display ........................................................................................5
2.6. Compact and Lightweight ..........................................................................5
Controls and their Functions ....................................................................... 6
1. Front Panel ......................................................................................................6
2. Connector Section (Rear) ................................................................................7
3. I/Os ..................................................................................................................8
3.1. VIDEO Input ..............................................................................................8
3.2. VIDEO Output ...........................................................................................8
3.3. AUDIO Input ..............................................................................................9
3.4. AUDIO Output ...........................................................................................9
3.5. TC (Time Code) Input ...............................................................................9
3.6. TC (Time Code) Output .............................................................................9
3.7. META DATA Input ...................................................................................10
3.8. META DATA Output ................................................................................10
3.9. Other I/Os (HD REF IN, VTR I/F) ............................................................10
3.10. Service Only (15 Pin) ..............................................................................10
2K Processor & HD-D5 VTR System Connections .................................. 11
Connection with existing systems ............................................................ 12
Indicator Display (Front Panel LED) .......................................................... 13
Connection Check ...................................................................................... 14
Service Switch (Rear) ................................................................................. 14
Power On ..................................................................................................... 14
Restrictions ................................................................................................. 15
Rack Mounting ............................................................................................ 17
Specifications .............................................................................................. 18

4
Operating Precautions
_Power supply
Use an AC 120 V (U.S.A. and Canada) power supply.
zBe sure to take hold of the power plug when connecting and
disconnecting the power cable.
zDo not run the power cable near a heating source.
zDo not place heavy objects on top of the power cable.
zDo not tamper with the power cable in any way.
_No insertion of foreign matters
Do not insert or drop metal or any foreign objects into the unit’s
openings (such as the fan vents).
Foreign objects inside the unit can cause a fire or short circuits.
Contact the dealer for assistance.
_No disassembly
High voltage is supplied to some parts inside the unit, and
touching these parts is not only dangerous but may cause a
malfunction.
Leave all internal insections and adjustments to the dealer from
whom you purchased the unit.
_DANGER: No operation if unit is
malfunctioning
If smoke comes out or strange sounds or smells are detected
from the unit, ask the dealer from whom you purchased the unit
for repairs.

5
Overview/Features
1. Overviews
This new 2K Processor (AJ-HDP2000) for the HD-D5 VTRs (AJ-HD3700H*1, AJ-HD3700A*1, AJ-HD3700B*2)
is designed for post-production and telecine systems, and this new technology provides a cost-effective and
efficient method of recording, editing and archiving full-size 2K and 4:4:4 HDTV images on the film post-
production standard D-5 mastering video tape recording system.
The 2K Processor allow professionals to record full 12-bit 4:4:4 “2K” 2048 k 1080 resolution film image data, or
12-bit 4:4:4 sampled 1920
k 1080 HD images onto Panasonic’s AJ-HD3700H, AJ-HD3700A or AJ-HD3700B
HD-D5 VTRs for editing, archiving, and distribution, a process that formerly was not easily achievable.
*1The software must be upgraded. For details, contact the dealer where you purchased the product.
*2The software for some VTRs must be upgraded. For details, contact the dealer where you purchased the
product.
2. Features
2.1. Compression
The 2K Processor uses JPEG2000 compression,
the similar compression scheme specified by the
Digital Cinema Initiative (DCI) for cinema release,
to convert film to digital data for subsequent
processing in advanced DI environments while
maintaining its resolution. The processor's
advanced encoder ensures that images remain
faithful throughout the recording process, and
minimizes distortion and resolution degradation
and offers optimized bit rate control and increased
error tolerance for the reliable interchange required
for editing.
2.2. VTRs Migration
The numerous Post facilities with capital
investments in D-5 will be able to use their current
AJ-HD3700 series, and the workflow that has
worked so well for them with existing HD-D5 VTRs
can be continued with a simple software upgrade
for 2K and HD post-production.
2.3. Dual-Link SDI & I/O
For ease of monitoring and interfacing with more
traditional high definition equipment, The 2K
Processor has added a 4:4:4 to 4:2:2 conversion
capability. The full audio capability of the D-5
format is maintained, including eight-channel 24-bit
recordings, as well as the ability of the system to
handle compression audio streams for multi-
channel / second language applications. Audio I/O
is by means of embedded HD-SDI or HD-D5 VTR’s
AES/EBU inputs, analog inputs. Interconnection
from the processor to the HD-D5 VTR is by
mapped compressed data over the HD-D5 VTR’s
existing HD-SDI input / outputs. The processor
accepts dual link SMPTE 372M video / 2K inputs.
Time Code in/out is embedded or HD-D5 VTR’s
XLR.
2.4. Maximum Record Time
Maximum recording time is 155 minutes, the same
as the HD-D5 VTR’s 24fps modes.
2.5. Indicator Display
Alarm indicator (RED):
When flashing, indicates that some errors
have occurred.
When lit constantly, indicates a serious
problem such as the fan has stopped or the
rear service switch is ON.
2048/1920 indicator (GREEN):
Indicates the Horizontal sample number of
System settings.
2.6. Compact and Lightweight
With a height of 2U and weight of 7.5 kg (16.5 lb),
this compact and lightweight unit can be
transported easily.

6
Controls and their Functions
1. Front Panel
!1" Power Lamp This lights when the power is turned on.
!2" Power Switch When the ON side is pressed, the power is turned on; when
the OFF side is pressed, the power is turned off.
| : Press the “ | ” side of the power switch to turn the power
on.
±:Press the “ ±” side of the power switch to turn the power
off.
!3" Alarm Lamp This lights when a problem has occurred in the main unit,
making it impossible to guarantee operation. (Refer to the
messages on page 13.)
!4" Horizontal Sample Display Lamp This displays the H sample of the video signal that is system
setting.
!2"!1" !3" !4"

7
Controls and their Functions (Continued)
2. Connector Section (Rear)
!1" AC Input Socket Use the accessory power cord to connect the socket to the power outlet
!2" Fuse Power circuit fuse
!3" GND (ground) Terminal When connected with another unit, the unit must be ground here
!4" Dual-Link SDI Input For inputting the Dual-Link digital signals
!5" Dual-Link SDI Output 1, 2 For outputting the Dual-Link or HD digital signals
(4:4:4/4:2:2 switchable)
!6" HD-SDI Monitor Output For outputting the HD digital signals (4:2:2 samples)
!7" Serial Data input (HD-SDI) This is connected to the HD SDI OUT connector on the HD-D5 VTR for
inputting for video/ audio/ tc output data from the HD-D5 VTR.
!8" Serial Data Output (HD-SDI) This is connected to the HD SDI IN connector on the HD-D5 VTR for
outputting the video/ audio/ tc data.
!9" HD SYNC OUT This is connected to the REF IN HD connector on the HD-D5 VTR.
The sync signal re-generated from the HD REF IN signal of the
processor.
!10" HD REF IN For inputting the tri-level sync signals as reference signals
!11" HD Reference Through Output
(Auto Terminated)
This is through output of input reference signal
!12" Service Switch
(only Use Service Maintenance)
This slide switch is used only in service mode.
Please Slide OFF for Normal Operation.
!13" SERVICE ONLY (RS-232C)
<15pin>
(only Use Service Maintenance)
This connector is used only in service mode.
!9"!8"!7"!6" !2"!11"!13"!12" !10" !1" !3"!4" !5"

8
Controls and their Functions (Continued)
3. I/Os
3.1. VIDEO Input
zThe following two VIDEO input signals are supported.
1920 a1080/23.98PsF, 24PsF XYZ/RGB 4:4:4 12 bits
2048 a1080/23.98PsF, 24PsF XYZ/RGB 4:4:4 12 bits
zThe color space signal format is selected from the following two types in FRONT MENU of the HD-D5 VTR.
SYSTEM settings for the RGB and XYZ color spaces
RGB: Mode for recording and playback RGB color space
XYZ: Mode for recording and playback XYZ color space
3.2. VIDEO Output
zThere are three types of VIDEO output signals, and output signals are set in SYSTEM FORMAT in FRONT
MENU of the HD-D5 VTR.
1920 a 1080/23.98PsF, 24PsF XYZ/RGB 4:4:4 12/10 bits
2048 a 1080/23.98PsF, 24PsF XYZ/RGB 4:4:4 12/10 bits
1920 a 1080/23.98PsF, 24PsF YPbPr 4:2:2 10 bits
zThe main output is available in 4:2:2 format a 4 lines.
zBoth main output and monitor output have the Dynamic Rounding function when 10-bit output is selected.
zThe VANC/HANC data, such as Audio/TC/Meta/Payload information, is not embedded on the OUTPUT MON
(Monitor) output.
zIn OUTPUT MON (Monitor) and when the 4:2:2 format is selected for the main system, an H CROP function for
1920 samples is available in 2048 samples. However, the Squeeze and Letter Box functions are not available.
The following three kinds of modes are available as fixed Crop modes.
CTR Crop: Both sides are equally cropped so that the number of samples is 1920.
L Crop: The left side is cropped so that the number of samples is 1920.
R Crop: The right side is cropped so that the number of samples is 1920.
zOUTPUT MON (Monitor) has a function to turn on/off superimposition in SUPER.
Name Video Input Signal
INPUT A
INPUT B
Dual Link SDI Input BNC a2, 75 Ω
1920 a 1080/23.98, 24PsF XYZ/RGB 4:4:4
SMPTE 372M/291M/292M/299M standard
2048 a1080/23.98, 24PsF XYZ/RGB 4:4:4
Name Video Output Signal
OUTPUT 1A
OUTPUT 1B
Dual Link SDI Output BNC a2 a2, 75 Ω
1920 a 1080/23.98, 24PsF XYZ/RGB 4:4:4
SMPTE 372M/291M/292M/299M standard
OUTPUT 2A
OUTPUT 2B
2048 a1080/23.98, 24PsF XYZ/RGB 4:4:4
1920 a 1080/23.98, 24PsF YPbPr 4:2:2
SMPTE 291M/292M/299M standard
OUTPUT MON Single HD SDI Monitor Output BNC a1, 75 Ω(Super ON/OFF)
1920 a 1080/23.98, 24PsF YPbPr 4:2:2
SMPTE 292M standard
(Video Signal only w/o ANC data)

9
Controls and their Functions (Continued)
3.3. AUDIO Input
zFor AUDIO input, an SDI Embedded Audio function is available with the 2K processor, and AES/EBU Digital
Audio, Analog Audio, and CUE Audio inputs are available from the HD-D5 VTR in a manner similar to the single
operation of the HD-D5 VTR.
zThe AUDIO input signal is selected in FRONT MENU of the main unit in a manner similar to the single
operation of the HD-D5 VTR.
zSDI Embedded Audio input signals are available only for Ach of Dual Link SDI signals.
3.4. AUDIO Output
zFor AUDIO output, an SDI Embedded Audio function is available with the 2K processor, and AES/EBU Digital
Audio, Analog Audio, and CUE Audio outputs are available from the HD-D5 VTR in a manner similar to the
single operation of the HD-D5 VTR.
zThe AUDIO output signal is selected in FRONT MENU of the HD-D5 VTR in a manner similar to the single
operation of the HD-D5 VTR.
zSDI Embedded Audio output signals are available only on Ach of Dual Link SDI signals.
zSDI Embedded Audio signals are not available on OUTPUT MON (Monitor).
3.5. TC (Time Code) Input
zFor TC input, an SDI Embedded HANC TC function is available with the 2K processor, and the LINEAR TC
input is available from the HD-D5 VTR in a manner similar to the single operation of the HD-D5 VTR.
zFor SDI Embedded HANC TC input signals, only Ach of Dual Link SDI signals is supported.
zLTC or VITC can be selected as a SDI Embedded HANC TC input signal.
zThe TC input signal is selected in FRONT MENU of the HD-D5 VTR in a manner similar to the single operation
of the HD-D5 VTR.
3.6. TC (Time Code) Output
zFor the TC output, an SDI Embedded HANC TC function is available with the 2K processor, and the LINEAR
TC output is available from the HD-D5 VTR in a manner similar to the single operation of the HD-D5 VTR.
zSDI Embedded HANC TC output signals are available only on Ach of Dual Link SDI signals.
zSDI Embedded HANC TC signals are not available on the OUTPUT MON (Monitor).
Audio Input Signal
Dual Link SDI Input
(Embedded Audio)
BNC a2, 75 Ω
SMPTE 299M standard
Audio Output Signal
Dual Link SDI Output
(Embedded Audio)
BNC a2 a2, 75 Ω
SMPTE 299M standard
TC Input Signal
Dual Link SDI Input
(Embedded LTC/VITC)
BNC a2, 75 Ω
SMPTE 291M standard
TC Output Signal
Dual Link SDI Output
(Embedded LTC/VITC)
BNC a2 a2, 75 Ω
SMPTE 291M standard

10
Controls and their Functions (Continued)
3.7. META DATA Input
zFor META DATA input, an SDI Embedded VANC function is available with the 2K processor, only Y signals in
Ach of Dual Link SDI signals are supported.
zMETA DATA can record up to 2,880 words per segmented frame.
The capacity of 2,880 words is the upper limit even when data exceeds the capacity (the same as single
operation of the HD-D5 VTR in the specifications).
3.8. META DATA Output
zFor META DATA output, an SDI Embedded VANC function is available with the 2K processor, and META DATA
signals are embedded only on Y signals in Ach of Dual Link SDI signals.
zMETA DATA output is embedded up to 2,880 words per segment frame on Y signals, where data is entered
from the head (the same as single operation of the HD-D5 VTR in specification).
zMETA DATA signals are not embedded on the OUTPUT MON (Monitor).
3.9. Other I/Os (HD REF IN, VTR I/F)
zThe reference input of the HD REF IN is only accepted tri-level signals of HD (1920 a 1080/23.98, 24PsF).
Loop-through output is available.
zBe sure to connect the HD SYNC OUT to the HD REF IN of the HD-D5 VTR to supply the tri-level signals of HD
(1920 a1080/23.98, 24PsF) from 2K Processor.
zBe sure to connect the SERIAL DATA OUT to the HD SDI IN of the HD-D5 VTR.
zBe sure to connect the SERIAL DATA IN to one of the HD SDI OUT1, OUT2 or OUT3 of the HD-D5 VTR.
3.10.Service Only (15 Pin)
Not applicable.
Terminal name Other Input and Output
HD REF IN HD Reference Input BNC a2 (loop-through a1),
75 Ωautomatic termination
HD (1920 a 1080/23.98, 24PsF) tri-level sync
HD SYNC OUT HD SYNC Output BNC a1, 75 Ω
HD (1920 a 1080/23.98, 24PsF) tri-level sync
Advanced Reference signal for the HD-D5 VTR
SERIAL DATA OUT VTR HD_SDI Output BNC a1, 75 Ω
1920 a 1080/23.98, 24PsF
SMPTE 292M compliance
SERIAL DATA IN VTR HD_SDI Input BNC a1, 75 Ω
1920 a 1080/23.98, 24PsF
SMPTE 292M compliance