Panasonic WJMPU955A - CENTRAL PROCESSING UNIT User manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
Central Processing Unit
WJ-MPU955A
FAN ALARM
HDD
ACTIVE
OPERATE
Central Processing Unit
Operating Instructions
Model No. WJ-MPU955A

2
The serial number of this product may be found on the sur-
face of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the litera-
ture accompanying the appliance.
Power disconnection. Unit with or without
ON-OFF switches have power supplied to
the unit whenever the power cord is inserted
into the power source; however, the unit is
operational only when the ON-OFF switch is
in the ON position. The power cord is the
main power disconnect for all units.
Wij verklaren als enige aansprakelijke, dat het product waarop deze
verklaring betrekking heeft, voldoet aan de volgende normen of andere
normatieve documenten, overeenkomstig de bepalingen van Richtlijnen
73/23/EEC en 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne
deklaration omhandler, er i overensstemmelse med standarder eller
andre normative dokumenter i følge bestemmelserne i direktivene
73/23/EEC og 89/336/EEC.
Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken
denna deklaration hänvisar är i överensstämmelse med
standarddokument, eller andra normativa dokument som framställs i
EEC-direktiv nr. 73/23 och 89/336.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus
koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja,
jotka noudattavat direktiivien 73/23/EEC ja 89/336/EE. säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen
gjelder for, er i overensstemmelse med følgende normer eller andre
normgivende dokumenter som følger bestemmelsene i direktivene
73/23/EEC og 89/336/EEC.
We declare under our sole responsibility that the product to which this
declaration relates is in conformity with the standards or other normative
documents following the provisions of Directives EEC/73/23 and
EEC/89/336.
Nosotros declaramos bajo nuestra única responsabilidad que el producto
a que hace referencia esta declaración está conforme con las normas u
otros documentos normativos siguiendo las estipulaciones de las
directivas CEE/73/23 y CEE/89/336.
Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a
cui si riferisce la presente dichiarazione risulta conforme ai seguenti
standard o altri documenti normativi conformi alle disposizioni delle
direttive CEE/73/23 e CEE/89/336.
Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich
diese Erklärung bezieht, mit der folgenden Normen oder normativen
Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie
73/23/EEC und 89/336/EEC.
Nous déclarons sous note seule responsabilité que le produit auquel se
réfère la présente déclaration est conforme aux normes ou autres
documents normatifs conformément aux dispositions des directives
CEE/73/23 et CEE/89/336.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CARE-
FULLY.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 13 amp and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark Hor the BSI mark Gon the body of the
fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic
Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCK-
ET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE
REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE
CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown
below.
If in any doubt please consult a qualified electrician.
WARNING: This apparatus must be earthed.
IMPORTANT
The wires in this mains lead are coloured in accordance with the follow-
ing code.
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows.
The wire which is coloured green-and-yellow must be con-
nected to the terminal in the plug which is marked with the letter Eor by
the earth symbol Ior coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal in
the plug which is marked with the letter Nor coloured black.
The wire which is coloured brown must be connected to the terminal
in the plug which is marked with the letter Lor coloured red.
How to replace the fuse
Open the fuse compartment with
a screwdriver and replace the fuse
and fuse cover.
For U.K.
FUSE
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
•This apparatus must be earthed.
•Apparatus shall be connected to a mains socket outlet with a
protective earthing connection.
•The mains plug or an appliance coupler shall remain readily
operable.
•To prevent fire or electric shock hazard, do not expose this
apparatus to rain or moisture.
•The apparatus should not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, should be
placed on the apparatus.
•All work related to the installation of this product should be
made by qualified service personnel or system installers.
•The connections should comply with local electrical code.

3
NOTE: This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference
when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example -
use only shielded interface cables when connecting to com-
puter or peripheral devices). Any changes or modifications
not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate this equip-
ment.
For U.S.A
This Class A digital apparatus complies with Canadian
ICES-003.
For Canada

4
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
S3125A

5
• Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• Other names of companies and products contained in these operating instructions may be trademarks or registered trade-
marks of their respective owners.
Trademarks and Registered Trademarks
Limitation of Liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WAR-
RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PAR-
TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE
THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INAC-
CURACIES OR TYPOGRAPHICAL ERRORS. CHANGES
ARE ADDED TO THE INFORMATION HEREIN, AT ANY
TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION
AND/OR THE CORRESPONDING PRODUCT (S).
Disclaimer of Warranty
IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRI-
AL CO., LTD. BE LIABLE TO ANY PARTY OR ANY PER-
SON, EXCEPT FOR CERTAIN WARRANTY PROGRAM
OFFERED BY THE LOCAL DEALER OF PANASONIC, FOR
THE CASES INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT
LIMITATION, DIRECT OR INDIRECT, SPECIAL, CON-
SEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR
RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY
INAPPROPRIATE USE OR NEGLIGENT OPERATION
OF THE USER;
(3) UNAUTHORIZED DISASSEMBLY, REPAIR OR MODIFI-
CATION OF THE PRODUCT BY THE USER;
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN
IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON
OR CAUSE INCLUDING ANY FAILURE OR PROBLEM
OF THE PRODUCT;
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE,
OR LOSS OR DAMAGE, ARISING OUT OF THE SYS-
TEM COMBINED BY THE DEVICES OF THIRD PARTY.
Software License (Licence)
This product includes a software component that is licensed by GNU General Public License (GPL) or GNU Lesser General
Public License (LGPL). For more details, refer to readme. txt file in the CD-ROM.
Network Security
As you will use this product connected to a network, your
attention is called to the following security risks.
1. Leakage or theft of information through this product
2. Use of this product for illegal operations by persons
with malicious intent
3. Interference with or stoppage of this product by per-
sons with malicious intent
It is your responsibility to take precautions such as
those described below to protect yourself against the
above network security risks.
• Use this product in a secured network.
• If this product is connected to a network that
includes PCs, make sure that the system is not
infected by computer viruses or other malicious
entities (using a regularly updated anti-virus pro-
gram, anti-spyware program, etc.).
• Protect your network against unauthorized access
by restricting users to those who log in with an
authorized user name and password.
• Apply measures such as user authentication to
protect your network against leakage or theft of
information, including image data, and authentica-
tion information (user names and passwords).

6
CONTENTS
Important Safety Instructions ........................................... 4
Limitation of Liability ........................................................ 5
Disclaimer of Warranty .................................................... 5
Trademarks and Registered Trademarks......................... 5
Network Security .............................................................. 5
Software License (Licence) ............................................. 5
Preface ............................................................................ 8
Features ........................................................................... 8
Precautions....................................................................... 9
Document Convention...................................................... 10
Cautions about the Network Environment ........................ 10
References ....................................................................... 11
Notification about System Units........................................ 11
FEATURES OF WJ-SX650 512 x 64
FULL MATRIX SYSTEM AND GX SYSTEM ................... 13
Main Features .............................................................. 14
■Operator Functions ................................................ 14
■Video Switch and Video Routing ............................ 14
■Video Camera Functions ........................................ 14
■Video Recorder Functions ...................................... 14
■Tour Sequences ..................................................... 15
■Alarm Programming and Handling ........................ 15
■Event Operations .................................................... 15
■Digital Input and Output Functions ........................ 15
■System Logs ........................................................... 15
GX System Examples (NTSC Model Only) .................. 16
■Standard System .................................................... 16
■Redundant System ................................................. 17
Available System Controllers ........................................ 18
WJ-SX650 512 x 64 Full Matrix System Example.......... 19
DETAILED PRODUCT DESCRIPTION ........................... 21
Major Operating Controls and Their Functions ............ 22
■Layout ..................................................................... 22
■Panel Details .......................................................... 23
INSTALLATIONS ............................................................. 25
Installations ................................................................... 26
■Mounting into the Rack .......................................... 26
CONNECTION OF GX SYSTEM
(NTSC MODEL ONLY)..................................................... 27
Connection with System Devices ................................. 28
■System Controllers ................................................. 28
■Connections and Configurations for Redundant
System .................................................................... 28
■Active Indicator Meanings ..................................... 29
■Digital Video Encoder Devices .............................. 30
■Digital Video Decoder Devices .............................. 32
■Setup Layer 3 Switching (L3SW) ............................ 33
■Admin Console ....................................................... 33
■Time Management Utility ........................................ 33
■Digital Disk Recorders ........................................... 34
CONNECTION OF WJ-SX650 512 x 64
FULL MATRIX SYSTEM .................................................. 35
Connection with System Devices ................................. 36
■System Controllers ................................................. 36
■Matrix Switcher WJ-SX650 Series .......................... 36
CONFIGURATION DETAILS ........................................... 41
Available Configurations ............................................... 42
■Configuration File Modification ............................... 42
■System Database ................................................... 42
Default SYS.INI Contents ............................................. 43
Default Database Contents
(WJ-SX650 512 x 64 Full Matrix System) ..................... 48
Database Contents (GX System) (NTSC Model Only).. 50
OPERATING PROCEDURES (with WV-CU950) ............ 53
LCD Display Descriptions ............................................ 54
■Default Status (LCD Display After Login) ............... 54
■Blinking ................................................................... 54
■Messages Displayed on the LCD .......................... 54
Login and Logout ......................................................... 55
■Operation Start (Login) ........................................... 55
■Operation End (Logout) ......................................... 55
■ID Display Function ................................................ 55
Monitor Selection and Camera Selection ..................... 56
■Monitor Selection .................................................... 56
■Camera Selection ................................................... 56
■Monitor Lock ........................................................... 56
Display Setting for Controller ....................................... 57
■Adjustment of LCD Display and Buzzer ................. 57
Camera Site Accessories Control ................................ 58
■Lens Control ........................................................... 58
■Pan/Tilt Control ....................................................... 58
■Wiper Control ......................................................... 59
■Defroster Control .................................................... 60
■Auxiliary Control ......................................................60
Camera Function Control ............................................. 61
■Camera Function (Shortcut Function) ................... 61
■Other Camera Functions ........................................ 61
Running Sequence .......................................................62
■Tour Sequence ....................................................... 62
■Group Sequence .................................................... 62
■Call Group Preset ................................................... 63
Monitor Display Control ................................................ 63
■On-Screen Display Control .................................... 63
■Alarm History Table ................................................ 63
■Alarm Status Table ................................................. 63
■Video Loss Status Table ......................................... 63
■System Status Table ............................................... 63
■Video Loss History Table ....................................... 63
Alarm Control ............................................................... 64
■Example of Alarm Input and Resulting Alarm
Activation ................................................................ 64
■Alarm Selection ...................................................... 64

7
■Alarm Arming Control ............................................. 64
■To Operate Alarm-related Camera (ACK) .............. 65
■To Cancel Alarms ................................................... 65
■Alarm History Table ................................................ 66
WJ-HD300A Series Control .......................................... 67
■Recorder Selection ................................................. 67
■Displaying WJ-HD300A Series SETUP MENU ....... 67
■Controlling Digital Disk Recorder
WJ-HD300A Series ................................................. 67
■Search Playback .................................................... 69
■Canceling Filters .................................................... 74
■Time & Date Search Playback ............................... 74
■System Function ..................................................... 75
■Other Functions ...................................................... 75
Menu Function Descriptions ........................................ 77
■Menu Functions ...................................................... 77
■To Recall Menu Functions ...................................... 77
Menu Function Details ................................................. 78
■Camera Setup ........................................................ 78
■Auto Mode .............................................................. 78
■BW Mode ................................................................ 78
■Patrol Learn ............................................................ 79
■Group Preset .......................................................... 79
■OSD Control ........................................................... 79
■Digital Output ......................................................... 79
■Alarm Status Table ................................................. 80
■Video Loss Status Table ......................................... 80
■System Status Table ............................................... 81
■Video Loss History Table ....................................... 81
■Area Change .......................................................... 82
■Operator ID ............................................................ 82
■Controller ID ........................................................... 82
■System Version ....................................................... 82
APPENDIX ....................................................................... 83
Troubleshooting ........................................................... 84
Specifications................................................................ 86
Standard Accessories .................................................. 86

8
Features
Preface
• Central Processing Unit WJ-MPU955A is the main component of WJ-SX650 512 x 64 Full Matrix System and GX System
that are network-based.
•This document describes how to operate Central Processing Unit WJ-MPU955A from the Panasonic Ethernet controllers.
Note: GX System is supported by NTSC model only.
You can select one of the following systems supported by WJ-MPU955A.
• GX System (NTSC model only)
This system is based on the video switch nodes of MPEG2 Encoder WJ-GXE900 and MPEG2 Decoder WJ-GXD900. WJ-
MPU955A can control up to 1 024 cameras and 256 monitors with 64 system controllers.
Note: MPEG2 Encoder WJ-GXE900 and MPEG2 Decoder WJ-GXD900 support the NTSC model only.
• System 850
This system is based on the video switch nodes of System850 Large Scale Matrix System (old generation). WJ-MPU955A
can control up to 1 024 cameras and 256 monitors with 64 system controllers.
Note: Refer to the dealer for details on System 850.
• WJ-SX650 512 x 64 Full Matrix System
This system is based on the video switch nodes of Matrix Switcher WJ-SX650 Series. WJ-MPU955A can control up to 512
cameras and 64 monitors with 64 system controllers.

9
Precautions
• Refer all work related to the installation of this
appliance to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
To prevent the appliance from overheating, place it at
least 5 cm {2 inches} away from the wall.
• Do not drop metallic parts through slots.
This could permanently damage the appliance. Turn
the power off immediately and contact qualified service
personnel for service.
• Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
• Handle the appliance with care.
Do not strike or shake, as this may damage the appli-
ance.
• Do not expose the appliance to water or moisture.
Do not try to operate it in wet areas.
Take immediate action if the appliance gets wet. Turn
the power off and refer servicing to qualified service
personnel. Moisture can damage the appliance and
also cause electric shocks.
• Do not use strong or abrasive detergents when
cleaning the appliance body.
Use a dry cloth to clean the appliance when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently.
• Do not operate the appliance beyond its specified
temperature, humidity, or power source ratings.
Use the appliance at temperatures within +5 °C to
+45 °C {41 °F to 113 °F} and humidity below 90 %.
The input power source for NTSC model is 120 V AC
60 Hz, for PAL model is 220 V - 240 V AC 50 Hz.
• We recommend that you make a note of your set-
tings and save them.
This will help you when a system configuration change
is required or when an unexpected trouble or failure
occurs.
• Distributing, copying, disassembling, reverse com-
piling, reverse engineering, and also exporting in
violation of export laws of the software provided
with this product, is expressly prohibited.
• We encourage you to obtain and read all the related
documents in p. 11 References and become familiar
with the CPU and other related devices and soft-
ware.
• Built-in backup battery
The built-in battery life is approximately 3 years as an
indication of replacement. (This is just an indication of
replacement. We are not providing any guarantee of
the built-in battery lifetime. Replacement cost of the
built-in battery is not covered by the warranty even if it
needs to be done within the warranty period.) Consult
your dealer for servicing.
• Cooling Fan
Turn the power off when cleaning the unit. Otherwise it
may cause injuries.
The cooling fan will operate for approximately 30 000
hours. Replacement costs of the cooling fan are not
covered by the warranty even if it needs to be done
within the warranty period. Consult your dealer for ser-
vicing.
• Hard Disk Drive
The hard disk drive will operate for approximately
30 000 hours. Replacement costs of the hard disk drive
are not covered by the warranty even if it needs to be
done within the warranty period. Consult your dealer for
servicing.

10
This document uses the following convention when describing the use and operation of this unit.
System Controller: Panasonic System Controller WV-CU950
CPU: Panasonic Central Processing Unit WJ-MPU955A Series
Admin Console: Panasonic Administration Console (Software)
MPEG2 Encoder: Panasonic MPEG2 Encoder WJ-GXE900 (NTSC model only)
MPEG2 Decoder: Panasonic MPEG2 Decoder WJ-GXD900 (NTSC model only)
Time Management Utility (or TMU): Panasonic Time Management Utility (Software)
Digital Disk Recorder: Panasonic Digital Disk Recorder WJ-HD300A Series
GX: Panasonic MPEG2 Encoder and Decoder integrated system (NTSC model only)
SX850: Panasonic System850 Large Scale Matrix System (Old generation)
SX650: Panasonic Matrix Switcher WJ-SX650 Series
Caution(s): Caution statements identify conditions or practices that could result in damage to this product or injury.
Note(s): Note statements identify special instruction, rule, or side comment related to the topic.
Document Convention
GX System is IP network-based. Creating a reliable network is the key to a successful system. Please note that the encoder
device sends a multicast stream (9.2 Mbps max. X 4 streams). Obtain confirmation from the network administrator that this
bandwidth usage will not cause a network failure.
Note: MPEG2 Encoder (WJ-GXE900) and MPEG2 Decoder (WJ-GXD900) support the NTSC model only.
Cautions about the Network Environment

11
System type
This document will provide the product information about WJ-SX650 512 x 64 Full Matrix System and GX System.
• Admin Console User's Guide
• MPEG2 Encoder WJ-GXE900/MPEG2 Decoder WJ-GXD900 Operating Instructions (NTSC model only)
• Time Management Utility User's Guide
• Digital Disk Recorder WJ-HD300A Series Operating Instructions
• Matrix Switcher WJ-SX650 Series Operating Instructions
References
The following diagram shows the available system types and components for WJ-SX650 512 x 64 Full Matrix System and GX
System.
Notification about System Units
* NTSC model only
Notification about WJ-GXD900 and WJ-GXE900 firmware versions
• To use WJ-GXD900 and WJ-GXE900 (NTSC model only) devices with WJ-MPU955A, the firmware of WJ-GXD900 and WJ-
GXE900 must be version 2.00 or later.
• The firmware version is displayed on the home page of either WJ-GXD900 and WJ-GXE900 when accessed via a web
browser. (NTSC model only)
• If the firmware version is earlier than 2.00, contact your sales representative.
CPU(s) Old software version New software version
(1)* GX only WJ-MPU955A 3.1 3.2
WJ-MPU955A
WJ-MPU955A
WJ-MPU955A
WJ-MPU955A
WJ-MPU955A(s)
Upgrade software
–
–
–
WJ-ASC960
WJ-ASC960
WJ-ASC960
(2) SX850 only
(3) SX650 only
(4)* GX and SX850
(5)* GX and SX650
(6) Satellite
–
–
4.1
–
4.1
3.2
3.2
4.2
4.2
4.2

12
This page intentionally left blank.

13
FEATURES OF WJ-SX650 512 x 64 FULL
MATRIX SYSTEM AND GX SYSTEM

14
Main Features
■ Operator Functions
● Operator Area Changes
The system can be divided into multiple areas (up to 64),
and an operator can change from one area to another if
they have the necessary permission.
● Operator Log On and Off
Operators are assigned a user ID and password by a sys-
tem administrator. A user ID and password are required for
any operator to log on to the system. System administrators
can specify to automatically log operators off if there is no
activity for a pre-defined time period.
● Operator Class
The system allows administrators to define operator classes
with up to 25 different privileges, and then assign each
operator to one of the defined classes. The privileges are:
permission override, area change, alarm select, all alarm
reset, alarm acknowledge and reset, all alarm arm and dis-
arm, alarm arm and disarm, camera select, camera posi-
tion, camera preset programming, camera menu on and
off, camera function enable (not currently supported), cam-
era receiver, camera setup data, camera lock, camera lock
override, tour sequence, all sequence stop (not currently
supported), sequence controller programming, monitor
select, monitor lock, on-screen display on and off, time and
date on and off, digital disk recorder select, digital disk
recorder control.
● Operator Priority
The system administrator can assign a priority to each
operator. When two operators compete for system
resources, only the operator with the higher priority gets the
resources.
■ Video Switch and Video
Routing
This function allows operators to switch video from one
video source to another, if the permission is granted. For
multiple operators competing for the same resource, it only
allows the highest priority operator to perform this function.
The next highest priority operator gains control when the
highest priority operator releases the resource.
■ Video Camera Functions
● Camera Control
The system provides operators with the camera control
functions. The supported functions are: pan, tilt, zoom,
focus, and iris.
● Camera Operation
The system provides operators with the following camera
operation functions:
• Camera menu control
• Camera preset call and programming
• Camera receiver control
■ Video Recorder Functions
● Recorder Basic Operations
The system provides operators with the following video
recorder functions:
• Recording
• Playback, pause, and stop
• Fast-forward and rewind playback at different speeds
• Video input channel selection
• Multiscreen segment switching
● Recorder Search Functions
The system provides operators with the following recorder
search functions:
• Date-and-time search playback
• Recording event search (Thumbnail or list search)
• VMD search (Video motion detection search)
● Recorder Menu Functions
The system provides operators with the following recorder
menu functions:
• Recorder setup menu
• Disk selection menu
• A – B repeat playback menu
• Filter cancellation menu
● Recorder Instant Playback Operation
The system provides operators with the instant playback
operation for a selected global camera.

15
■ Tour Sequences
● Program the Tour Sequences
This function allows administrators to program tour
sequences, and store them in the system database.
The WJ-MPU955A can execute 20 tour sequence steps in
around one second. If the WJ-MPU955A is asked to per-
form more than 20 steps in a single second, it will automati-
cally form 20-step groups, and alternate their execution
over a period of two or more seconds.
● Tour Sequence Operation
The tour sequence operation includes start, stop, pause,
run, next step, and previous step.
■ Alarm Programming and
Handling
● Alarm Programming
This function allows administrators to program alarms,
assign alarm display targets, and define alarm actions.
● Alarm Control
Alarm controls are operator functions. These functions allow
the highest priority operator to select the alarm and control
it. These functions also allow the next highest priority opera-
tor to gain control after the highest priority operator releas-
es the alarm.
The alarm controls include:
• Arm and disarm alarms
• Acknowledge active alarms
• Reset acknowledged or active alarms
The system also supports automatically resetting and
acknowledging alarms through configuration by the admin
console.
● Alarm Action Control
The system supports the following alarm actions:
• Camera spots
• Tour sequences
• Text display
The system supports up to 10 alarm actions, and allows
operators to control acknowledged alarm actions.
■ Event Operations
The function allows administrators to program system
events. The event function currently supports following
operations:
• Camera spot
• Tour sequence
• Arm and disarm alarm
• Up to 4 system modes
■ Digital Input and Output
Functions
This function allows operators to select and set digital out-
put ports. The system alarm function can program the digi-
tal output ports as part of the alarm state change indication.
The system alarm function can also program the digital
input ports as alarm trigger sources.
■ System Logs
The system supports following system logs:
• Operator log
• Alarm log
• Video loss log

16
■ Standard System
Standard System contains one CPU. It can handle up to 256 encoder devices, up to 64 decoder devices, one administration
station, and up to 64 system controllers. The IP addresses in the following diagram are the default addresses of the CPU net-
work ports.
Note: MPEG2 Encoder (WJ-GXE900) and MPEG2 Decoder (WJ-GXD900) support the NTSC model only.
GX System Examples (NTSC Model Only)
SIGNAL GND
POWER
ON
OFF
3
3
1
4
21
4
2
VIDEO OUTAUDIO OUT
MIX
RESET
1000BASE-T
100BASE-TX
V+ –G
QUAD
SIGNAL GND
POWER
ON
OFF
3
3
1
4
21
4
2
VIDEO OUTAUDIO OUT
MIX
RESET
1000BASE-T
100BASE-TX
V+ –G
QUAD
10BASE-T/100BASE-TX SERIAL
21OTHERSYSTEM
DEVICE
SYSTEM
CONTROLLER
POWER
ON
AC IN
OFF
SIGNAL GND
PC
with Admin Console
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
192.168.1.10
Switching HUB
Switching HUB
Switching HUB
L3SW
WJ-GXE900
192.168.1.11
192.168.1.1 192.168.3.1 192.168.4.1
192.168.4.11
192.168.3.11
192.168.2.1 192.168.200.1
192.168.200.200172.18.0.1
WJ-GXE900
192.168.2.10
WJ-GXE900
192.168.2.11
WJ-GXE900
WJ-HD300A Series
System Controller
(Ethernet)
WJ-GXD900
WJ-GXD900
WJ-MPU955A
1
18
2
IN
OUT
CASCADE
OUT
16
16
3
15
15
14
14
13
2
1
13
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
VIDEO
AUDIO IN AUDIO OUT
MONITOR OUT CASCADEIN MONITOR (VGA) ALARM/CONTROL
SERIAL ALARM
POWER
COPY 1
MODE
EXT STORAGE10/100BASE-TRS485(CAMERA) DATA
AC IN
SIGNAL GND
1
4 2

17
■ Redundant System
Redundant System requires two CPUs. It can also handle up to 256 encoder devices, up to 64 decoder devices, one adminis-
tration station, and up to 64 system controllers.
SIGNAL GND
POWER
ON
OFF
3
3
1
4
21
4
2
VIDEO OUTAUDIO OUT
MIX
RESET
1000BASE-T
100BASE-TX
V+ –G
QUAD
SIGNAL GND
POWER
ON
OFF
3
3
1
4
21
4
2
VIDEO OUTAUDIO OUT
MIX
RESET
1000BASE-T
100BASE-TX
V+ –G
QUAD
10BASE-T/100BASE-TX SERIAL
21OTHERSYSTEM
DEVICE
SYSTEM
CONTROLLER
POWER
ON
AC IN
OFF
SIGNAL GND
10BASE-T/100BASE-TX SERIAL
21OTHERSYSTEM
DEVICE
SYSTEM
CONTROLLER
POWER
ON
AC IN
OFF
SIGNAL GND
PC with
Admin Console
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
POWER
ON OFF
SIGNAL
AUDIO INVIDEO OUTVIDEO IN
100BASE-TX RS-485
TERM
1
GND
23
ON OFF
4
ALARM IN TRIGGER OUT RESET
4321G4321GGV+–G
192.168.1.10
Switching HUB
Switching HUB
Switching HUB
Switching HUB
L3SW
WJ-GXE900
192.168.1.11
192.168.1.1 192.168.3.1 192.168.4.1
192.168.4.11
192.168.3.11
192.168.2.1 192.168.200.1
192.168.200.200
172.18.0.2
172.18.0.1
WJ-GXE900
192.168.2.10
WJ-GXE900
192.168.2.11
WJ-GXE900
WJ-HD300A Series
System Controller
(Ethernet)
WJ-GXD900
WJ-GXD900
WJ-MPU955A
9-pin D-sub
cross cable
WJ-MPU955A
1
18
2
IN
OUT
CASCADE
OUT
16
16
3
15
15
14
14
13
2
1
13
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
VIDEO
AUDIO IN AUDIO OUT
MONITOR OUT CASCADEIN MONITOR (VGA) ALARM/CONTROL
SERIAL ALARM
POWER
COPY 1
MODE
EXT STORAGE10/100BASE-TRS485(CAMERA) DATA
AC IN
SIGNAL GND
1
4 2
192.168.200.201

18
Ethernet Controllers
• WJ-MPU955A supports Panasonic Ethernet controllers.
• Up to 64 system controllers are connectable in the system.
• IP addresses will be automatically provided to each system controller during the communication with the CPU.
Available System Controllers

19
This system contains one CPU. The CPU can handle up to four SX650 sub nodes and two SX650 bridge nodes, one admin
console and up to 64 system controllers.
Each sub node should equip one Network Board WJ-PB65E01 to communicate with the CPU through the Ethernet wiring.
WJ-SX650 512 x 64 Full Matrix System Example
Not used
Not used
Video Input Board (8)
Video Input Board (7)
Video Input Board (6)
Video Input Board (5)
Video Input Board (4)
Video Input Board (3)
Video Input Board (2)
Video Input Board (1)
Video Output Board (2)
Video Output Board (1)
Not used
Not used
Video Input Board (8)
Video Input Board (7)
Video Input Board (6)
Video Input Board (5)
Video Input Board (4)
Video Input Board (3)
Video Input Board (2)
Video Input Board (1)
Video Output Board (2)
Video Output Board (1)
Camera 1 - - - - Camera 256
SX650 SubNode 1
Camera Control Function
Video Switching Function
SX650 SubNode 2
Camera Control Function
Video Switching Function
Camera 257 - - - - Camera 512
Mount the network board into
the OUT X-1 slot of WJ-SX650.
Mount the network board into
the OUT X-1 slot of WJ-SX650.
Mount the network board into
the OUT X-1 slot of WJ-SX650.
Mount the network board into
the OUT X-1 slot of WJ-SX650.
32 Coaxial Cables 32 Coaxial Cables
WJ-PB65E01
WJ-PB65E01
WJ-PB65E01
Not used
Not used
Video Input Board (2)
Video Input Board (1)
Video Output Board (2)
Video Output Board (1)
Not used
Not used
Video Input Board (8)
Video Input Board (7)
Video Input Board (6)
Video Input Board (5)
Video Input Board (4)
Video Input Board (3)
Video Input Board (2)
Video Input Board (1)
Video Output Board (2)
Video Output Board (1)
Not used
Not used
Video Input Board (8)
Video Input Board (7)
Video Input Board (6)
Video Input Board (5)
Video Input Board (4)
Video Input Board (3)
Video Input Board (2)
Video Input Board (1)
Video Output Board (2)
Video Output Board (1)
SX650 SubNode 4
Video Switching Function
SX650 SubNode 3 (Bridge)
Video Switching Function
OSD Function
SX650 SubNode 6 (Bridge)
Video Switching Function
OSD Function
SX650 SubNode 5
Video Switching Function
32 Coaxial Cables 32 Coaxial Cables
WJ-PB65E01
WJ-PB65E01
WJ-PB65E01
Not used
Not used
Video Input Board (2)
Video Input Board (1)
Video Output Board (2)
Video Output Board (1)
Monitor 1
Monitor 32
- - -
Monitor 33
Monitor 64
- - -
WJ-SX650U
WJ-SX650
PC with
Admin Console
Connect to each WJ-PB65E01
System Controller
(Ethernet)
Switching HUB
Switching HUB 10BASE-T/100BASE-TX SERIAL
21OTHERSYSTEM
DEVICE
SYSTEM
CONTROLLER
POWER
ON
AC IN
OFF
SIGNAL GND
192.168.200.200
WJ-MPU955A
172.18.0.1
Refer to *1-3 (p. 38). Refer to *1-4 (p. 38).
Refer to *2-1 (p. 39). Refer to *2-2 (p. 40).
Refer to *1-2 (p. 38).Refer to *1-1 (p. 38).

20
This page intentionally left blank.