Panasonic Panaboard UB-5310 User manual

Electronic Board
Operating Instructions
With Installation Manual
(for qualified service personnel)
Model No. UB-5310
Stand kit is optional.
[Stand (option)] [Wall-mounting]
Operating Instructions Installation Manual
• To assemble this unit, please refer to the Installation Manual.
• Before operating this unit, please read these instructions completely and keep them carefully for future reference.
• This product is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the operation of
this equipment.
• To locate the closest authorized dealer in your area, please call 1-800-449-8989.
UB-5310_MECA.book 1 ページ ２００３年５月１５日 木曜日 午後５時２３分

2
Thank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.
Q’ty
• Markers (red, black, and blue) . . . . . . 1 each
• Operating Instructions . . . . . . . . . . . . . 1
• Eraser . . . . . . . . . . . . . . . . . . . . . . 1
• Power cord . . . . . . . . . . . . . . . . . . . 1
Q’ty
• Letter size copy paper roll [10 m (32.8 ft.)] . . . 1
• Software CD-ROM . . . . . . . . . . . . . . . 1
• Software License Agreement . . . . . . . . . . 1
• Warranty card . . . . . . . . . . . . . . . . . . 1
* The stand is optional. By way of example, this manual describes an Electronic Board which is used with the stand.
* USB cable is not included.
For your future reference
Date of purchase: _________________________ Serial number: ____________________________
Dealer’s name and address: ______________________________________________________________
Dealer’s address: ______________________________________________________________________
Attach your sales receipt here
Things you should keep a record of
Accessories
Te l :
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
• Microsoft, Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
Windows®is Microsoft®Windows®operating system.
Screen shots reprinted with permission from Microsoft Corporation.
• IBM is a registered trademark of International Business Machines Corporation.
• Pentium is a registered trademark of Intel Corporation in the U.S. and other countries.
• Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
• All trademarks referred to in this manual are property of their respective companies.
The information given in this Operating Instructions is subject to change without notice.
FCC Warning: To assure continued FCC compliance, the user must use only the provided power supply cord.
Also, any unauthorized changes or modifications to this equipment would void the user’s authority
to operate this device.
Federal Communications Commission Requirements
Cover_MECA.fm 2 ページ ２００３年５月１５日 木曜日 午後７時２２分

3
Operating Instructions
For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Loading Copy Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Copy types and procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Screen Height Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Computer Interfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Contents of CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Connecting the unit to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Installing the driver and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• Removing the driver and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
• Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
• Panaboard Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Daily Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Cleaning the screen and the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Caring for the eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Cleaning the printer head and paper feed roller. . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
• Meanings of error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
• Option and Separately available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Warning about saving data
When the system storage device or any of its optional storage device is adversely effected by operational
errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction,
repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a
point of reading the precautionary notes in the Operating Instructions and the help information, and observe
them during operation.
Please observe carefully the following precaution:
• Make absolutely sure that all important data is saved by back-up or the original is saved.
The manufacturer hereby declares that it cannot be held accountable for any loss or change in any data
stored on floppy disks, hard disks, optical disks, or other memory devices.
Page
Table of Contents
Before
You Start
Using
Help
UB-5310_MECA.book 3 ページ ２００３年５月１５日 木曜日 午後５時２３分

4
For Your Safety
CAUTION:
TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF
THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
ANY TYPE OF MOISTURE.
THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY
ACCESSIBLE.
The product should be used only with the power cord that is supplied by the manufacturer.
CLASS 1 LED PRODUCT
UB-5310_MECA.book 4 ページ ２００３年５月１５日 木曜日 午後５時２３分

5
Operating Instructions
Precautions
Never remove the cover, take apart or modify the
product. This will void the warranty.
Do not position the electronic board in a location where
it is unstable.
Do not put drinks, other liquids or heavy items on the
tray or screen.
After installing or moving the electronic board, lock the
casters and set the fall-prevention extension legs.
Do not use the electronic board in an excessively
humid or dusty location.
If the electronic board is not going to be used for an
extended period of time (e.g., during extended
holidays), turn off the power and remove the plug from
the wall outlet.
Locking the casters
(Push this side)
Push to lock
UB-5310_MECA.book 5 ページ ２００３年５月１５日 木曜日 午後５時２３分

Precautions
6
■CD-ROM
To prevent the CD-ROMs from accidental damages:
Do not lean against the screen or on the cover (lower),
even if the electronic board is mounted on the wall.
Adjust the screen height with two persons after
installation.
Confirm both sides of the screen are hung in the same
height slots.
Make sure to tighten the height adjustment handles
after adjusting the screen height.
Do not touch or write on the surface
of the disc.
Do not leave the disc out of the
protective case.
Do not leave the disc in direct
sunlight or near heat sources.
Do not place heavy objects on the
disc case or drop the case.
To clean the disc, hold the disc by
its edges and wipe it from the
center to the edges with a dry, soft
cloth.
Slot 1
Slot 3
Slot 2
Slot 1
Slot 3
Slot 2
Tighten
the height
adjustment
handles
Tighten
the height
adjustment
handles
UB-5310_MECA.book 6 ページ ２００３年５月１５日 木曜日 午後５時２３分

Precautions
7
Operating Instructions
Installation • Do not install the unit where it may be exposed to direct sunlight, near heating
equipment, or near air-conditioning vents as this may cause stretching and/or
discoloration of the screen.
• Do not install the unit in strong sunlight or strong lighting. Proper copying may
become impossible.
• Do not install the unit in locations where the temperature may change suddenly as
this may disable the unit’s ability to make copies.
Screen Film • Make thick and dark lines inside the copying
area. Note that any writing inside the shaded
area (on right) cannot be copied.
• Do not allow writing to remain on the screen for
an extended period of time as it will become
harder to erase.
• Do not touch the screen, write with markers, or
erase while the screen is moving as this may result in damage to the unit.
Markers,
Erasers and
Copy Paper
• Use only the included or designated markers, erasers and copy paper.
(See page 30.)
Use of accessories other than those included or designated (such as oil-based
markers) may damage the screen or result in hard-to-erase markings.
• Store markers horizontally as vertical storage may stop the ink from coming out.
• Store a copy paper roll in a cool, dark, moisture free location.
• Do not store printed copies exposed to direct sunlight or hifh humidity, or inside
vinyl chloride (plastic) files.
• For long-term storage, make another copy with an ordinary paper copier machine.
Power Cord • When moving the unit, disconnect the power cord from the electrical power socket
and from the printer’s power connector and coil it for transportation as stepping on
the power cord or having it catch on something during movement may result in
damage to the cord.
USB Cable • Use a shielded USB cable that is certified as logo by USB-IF.
• If you connect the electronic board to a USB hub, it is not guaranteed to work.
Copying area
0 mm 12.5 mm
25 mm (1
" )
25 mm (1
" )
(1/2
" )
UB-5310_MECA.book 7 ページ ２００３年５月１５日 木曜日 午後５時２３分

8
Part Names and Functions
PUSHOPEN
ON
OFF
PUSH OPEN
Screen Film
AC Inlet
Power Switch
Tray
Power Cord
Output Port
Printer Door
Open this door to load
copy paper or to remove
jammed paper.
(See pages 10, 13.) Door Open
Button
Push this button to open
the printer door.
Control Panel
(See page 9 for details.)
USB Connector
(See page 16.)
Stand
The stand is optional.
Scanner
Copied Paper Holder
This holder holds up to 5
sheets of output paper.
Printer
UB-5310_MECA.book 8 ページ ２００３年５月１５日 木曜日 午後５時２３分

Part Names and Functions
9
Operating Instructions
■Control panel
Panel Name Description
Contrast
Indicator
This lamp indicator displays the printing contrast used during
copying.
Indicator off: Normal printing contrast
Indicator on: Darker than normal printing contrast
Contrast
Key
Each time this key is pressed, the unit will alternate between
normal and dark contrast modes (Normal/Dark).
2-Screen
Copy Key
This key causes the front and back of the screen to be copied on
a single sheet of paper.
Multi-Copy/
Error
Indicator
This indicator displays the number of copies to be made. The
display changes each time the Multi-Copy/Stop Key is pressed.
Example: 1 →2 → ··· →9 →1 → ···
When an error occurred, a flashing symbol will appear in this display to
indicate the error status. (See page 29.)
Multi-Copy/
Stop Key
When making multiple copies, press this key until the desired
number of copies is displayed on the Multi-Copy/Error Indicator.
This key can also be pressed while multiple copies are being
made to stop the copying process. The display indication
changes while multiple copies are being made as shown below.
After reaching 0, the display will reset to 1.
Example: 5 →4 →3 →2 →1 →0 →1
(countdown display during copying)
Copy Key This key causes the screen to be copied.
Advance
Key This key advances the screen from right to left.
Contrast Indicator Advance Key
Multi-Copy/Error Indicator
Multi-Copy/Stop Key
Copy Key
Contrast Key
2-Screen Copy Key
UB-5310_MECA.book 9 ページ ２００３年５月１５日 木曜日 午後５時２３分

10
Loading Copy Paper
1Turn the power switch on by pressing the “ I ” side
of the power switch.
• The unit is ready for use when “ ” is displayed on the
multi-copy/error indicator.
• The screen will move to home position and stop.
2Push the door open button and open the printer
door.
• If there is any copy paper remaining in the copy paper
compartment, remove it.
3
Load the copy paper roll with smooth side facing up.
Open the printer door to position B and load it, then
move the printer door to position A to prevent
paper roll from falling.
• Use copy paper roll with a core diameter of 25.4 mm
(1 inch) or more. Using a copy paper roll with a smaller
core could cause paper jams.
4Pass the paper over the paper feed roller and
under the cutter cover, then through the output port
about 4 cm (11/2inches).
5Close the printer door securely, using two hands.
• Once the door is closed, paper will feed and
automatically cut. Remove and discard the small piece
of paper.
Load a new roll when:
• Red bands become visible at the edge of the copy paper.
• The ERROR indicator “ ” goes on and off even after the printer door is closed properly.
PUSH OPEN
Power
Switch
Copy paper
compartment
PUSH OPEN
Door
Open
Button
A
B
Smooth side Wrong direction
Loosen about
15 cm (529/32")
as shown and
load it.
About
15 cm (529/32")
Note
Paper feed
roller
Cutter cover
About 4 cm (11/2")
Note
Using_MECA.fm 10 ページ ２００３年５月１６日 金曜日 午前１０時２２分