Panasonic KX-HGT100 User manual

KX-HGT100 SIP-Phone
Panasonic Telephone Systems www.voicesonic.com
Phone [phone]
Panasonic KX-HGT100, KXHGT100, HGT100
CONFIGURATIONS AND USER SETTINGS
All manuals and user guides at all-guides.com
all-guides.com

KX-HGT100 Configuration (1)
User name: KX-HGT100
Password: kx-hgt100
1. Connect the HGT100 to the LAN via a suitable switch port
2. Power on the unit (using PoE or the optional AC Adaptor)
3. Check the LCD Display shows “Not configured
Web Setting”
4. Using your Browser (Internet Explorer etc), access http://192.168.0.241/
Not Configured
Web Setting
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (2)
Unit has no Profile set.
Registration is not
possible
Unit Status:
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (3)
STATIC IP is set by default
Default IP:
192.168.0.241
Default Subnet Mask
255.255.255.0
Network Status:
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (4)
LAN Connection:
STATIC IP or DHCP Mode
can be selected.
(Static IP is Default = X )
NB: If you select ‘DHCP’ here, you will need to re-connect your browser using the
allocated IP address before continuing to configure.
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (5)
Enter IP Address etc
of HGT100 here
DNS Server Address can
be added here
(not required for TDE/NCP)
After clicking ‘Save’, please power off/on the HGT-100
All manuals and user guides at all-guides.com
all-guides.com

KX-HGT100 Configuration (6)
NB: When using DHCP, ensure that the PC connected to the PC-Port
is on the same network segment as the HGT-100, otherwise Internet
access from the PC will not be possible.
The allocated IP address can be
checked by pressing the [i+] key on
the HGT-100.
To re-connect with a browser (after
enabling DHCP), enter the allocated
IP address)
i.e. Allocated IP address 10.66.55.44
URL:http://10.66.55.44/
After clicking ‘Save’, power off/on the
HGT-100.
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (7)
Username and Password:
Modifies the HTTP
Login User name
and Password from
default
If Idle Timeout expires, unit will need to be powered off/on to re-open HTTP port. (“Special” Setting)
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (8)
Basic Settings: Refer to next slide for
language parameters;
SIP Extension details and
password (Telephone
Number and SIP ID can
match)
SIP Proxy, Registrar and
Domain information.
For NCP Extension, enter
the IP address of the NCP
for all settings.
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (9)
Basic Settings: (Example)
(Stand-Alone SIP Telephone configuration with Gamma SIP Account)
SIP Number,
Account and
password.
SIP Proxy,
Registrar and
Domain (IP or
DNS).
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (11)
Advanced Settings:
One Time Caller Code either Permits or Denies CLIP sending on a per call basis,
depending on the “My Caller ID” setting of the HGT100.
RTP Port Range (Voice Traffic)
Codec Priority:
PCMA/U = G711A/U
G726-32 (N/A for TDA/NCP)
G729A
DTMF Type:
Inband/Outband(RFC2833)
SIP UDP Control port
Diffserv(ToS) field settings
All manuals and user guides at all-guides.com
all-guides.com

KX-HGT100 Configuration (14)
Configuration File:
Basic Configurations can
be backed-up and/or
loaded via this screen.
This allows a dealer to
create a profile template
and then modify only a
small number of
parameters
(Number/Password etc)
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (15)
Upgrade Firmware:
Firmware updates can
be managed easily
from this page.
Power off/on the unit
to complete the
upgrade.
All manuals and user guides at all-guides.com

KX-HGT100 Configuration (16)
Unit Maintenance:
Lan/PC Port.
Speed/Duplex Settings;
Auto Negotiate
100Mbps/Full Duplex
100Mbps/Half Duplex
10Mbps/Full Duplex
10Mbps/Half Duplex
Auto Sense is supported.
All manuals and user guides at all-guides.com

‘PROGRAM’ KEY
LCD DISPLAY
‘NAVI’ KEY
‘INFORMATION’ KEY
‘MUTE’ KEY
KX-HGT100 User Setting (1)
‘OK’ KEY
AUTO HOLD Message Transfer
‘SP-Phone ‘Key SP-Phone, Hold
and Message Keys
have LED.
‘REDIAL’ KEY
All manuals and user guides at all-guides.com

Save Speed Dial?
[OK]=YES
KX-HGT100 User Setting (2)
Saved in No. 1
Select OK
PROGRAM
Enter No. 1No. 1 [OK]=SET
0123456789
Speed dial 0 ~ 9
1
How to access :-
‘OFF-HOOK’
Keys used:
1.
AUTO
All manuals and user guides at all-guides.com
all-guides.com

Set Date + Time
[OK]=YES
KX-HGT100 User Setting (3)
Enter Year 2008
[OK]
Enter Month/Day
05/07 [OK]
Enter Time
17:30 [OK]
▲▼= AM/PM/24H
17:30PM [OK]
My Caller ID
(Show) [OK]=YES OK Select
Show/Hide
OK
CLIR (Show/Hide)
2.
3.
All manuals and user guides at all-guides.com

KX-HGT100 User Setting (4)
LCD contrast ?
[OK]=YES
4.
-██████ +
[OK]=YES
Select
4 STEPS
Ringer Tone ?
Ring 1 [OK]=YES
5.
Ringer Tone ?
Ring 2[OK]=YES
Select
3 STYLES
Ringer Volume ?
Ring 1 [OK]=YES
6.
Ringer Volume [OK]
OFF - █████ +
Select
4 Position + ‘OFF’
‘OFF’ = SP-Phone LED Flashes
All manuals and user guides at all-guides.com

KX-HGT100 User Setting (5)
7.
Set Hold Music ?
(#01) [OK]=YES
Select
OK
#11 Settings (Inc ‘OFF’)
8.
KeyTone Volume ?
[OK]=YES
Keytone Volume
OFF - ███ + [OK]
Select
3 Settings (Inc ‘OFF’)
Time AM/PM 24H
(AM) [OK]=YES
9.
OK Select AM/PM/24H
All manuals and user guides at all-guides.com

KX-HGT100 User Setting (6)
10.
Change Language ?
English [OK] OK Select
Refer to
Slide #14
for
supported
languages
Set Network ?
(STATIC) [OK]=YES
11.
OK Select
STATIC IP
Or
DHCP
IP Address [OK]
192.168.010.003
Subnet Mask [OK]
255.255.255.0
Default GW [OK]
192.168.000.001
All manuals and user guides at all-guides.com