Panasonic KX-TA624 Installation and operating instructions

Advanced Hybrid System
KX-TA624
Installation Manual Addendum
for
KX-T77 and KX-T73 Series
This Installation Manual Addendum provides the additional information for the KX-T77 and KX-
T73 Series Telephones and the Panasonic Advanced Hybrid System, KX-TA624.
Panasonic Telephone Systems
www.voicesonic.com
Phone: [phone]
Panasonic KX-TA624
Panasonic KX-TA624, KXTA624, TA624, KX-TA62460, KX-TA62470, KX-TA62477, KX-TA62491, KX-TA62493

2
Table of Contents
System Component
System Components Table .................................................................................3
Features
Buttons on Proprietary Telephones ..................................................................3
Call Log, Incoming .............................................................................................4
Caller ID ..........................................................................................................3, 4
Caller ID Call Waiting .......................................................................................4
DSS Console ........................................................................................................4
Handset/Headset Selection .................................................................................4
Hands-free Answerback .....................................................................................4
Hands-free Operation ........................................................................................4
Room Monitor .....................................................................................................4
Station Programming .........................................................................................4
System Programming with a Proprietary Telephone ......................................4
System Programming
Using the Overlay ...............................................................................................5
Viewing the display .............................................................................................7
[002] System Password .....................................................................................10
[011] System Speed Dialing Name Setting ........................................................8
[309] Emergency Dial Number ........................................................................10
[968] KX-T77xx Incoming Lamp Control ........................................................9
Programming Tables
[002] System Password .....................................................................................10
[011] System Speed Dial Name Setting ...........................................................11
[309] Emergency Dial Number ........................................................................10
[968] KX-T77xx Incoming Lamp Control ......................................................10
Table of Contents

3
System Components
The following Panasonic Proprietary Telephones (PTs) and a DSS console are available for KX-TA624.
System Components Table (Additional)
Features
Additional Information for Features
The additional information for Features
Model Description
Telephone KX-T7735 Proprietary Telephone with 16-character/3-line and back-lit display
and Message/Ringer Lamp
KX-T7730 Proprietary Telephone with 16-character/1-line and back-lit display
and Message/Ringer Lamp
KX-T7720 Proprietary Telephone with Message/Ringer Lamp
KX-T7750 Proprietary Telephone with Message/Ringer Lamp and MONITOR
button
KX-T7335 Proprietary Telephone with 16-character/1-line and back-lit display
KX-T7320 Proprietary Telephone
KX-T7350 Proprietary Telephone with MONITOR button
Optional
Equipment
KX-T7740 DSS Console
Features Additional Information
Buttons on Proprietary
Telep hone
As for Buttons on the KX-T7735, KX-T7730, KX-T7720, KX-T7750, KX-
T7335, KX-T7320 and KX-T7350, please refer to the User Manual
Addendum for KX-T77 and KX-T73 Series.
Caller ID The conditions are added.
• An assigned name in program [011] “System Speed Dialing Name
Setting” will be displayed when the caller’s telephone number matches
one of System Speed Dialing numbers assigned in program [001]
“System Speed Dialing Entry” and a Telephone Company does not
provide the caller’s name.
• If a Telephone Company provides a caller’s name, the name from the
Telephone Company will be displayed even when a name assigned in
program [011] is effective.
System Componets & Features

4
The following features are available with PTs depending on the type of the KX-T77 or KX-T73
series.
Note
*1The KX-T7740 is available for the KX-TA624. For details about DSS Console, please refer to the
Installation Manual.
*2The MONITOR button on the KX-T7750 or KX-T7350 can be used for hands-free dialing operation, etc.,
but cannot be used for a hands-free conversation.
As for other features, please refer to the Installation Manual.
Features T7735
T7335
T7730 T7720
T7320
T7750
T7350
T7740
Call Log, Incoming
Caller ID/
Caller ID Call Waiting
DSS Console
*
1
Handset/Headset Selection
(for T7720) (for T7750)
Hands-free Answerback
Hands-free Operation
*2
Room Monitor
Station Programming
The following programming items are available.
Call Waiting Tone Type
Assignment
Flexible Button Assignment
Intercom Alert Assignment
Outside (CO) Line Ringing
Selection
Preferred Line Assignment
— Incoming/Outgoing
Station Programming Data
Default Set
Self-Extension Number
Confirmation
System Programming with a
Proprietary Telephone
Features

5
System Programming
A display PT (KX-T7735, KX-T7730 or KX-T7335) is required for system programming.
Using the Overly
A programming overlay is packed with the telephone at the factory.
This overlay should be used at all times during programming. The features of the telephone
keys change during programming as follows. (The original features are in parentheses.)
During Normal Operation During Programming
(PAUSE) PAUSE
(AUTO ANSWER/MUTE) SELECT
(AUTO DIAL/STORE) STORE
(FLASH/RECALL) FLASH
(INTERCOM) SECRET (T7735 or T7730)
(T7335)
(CONF or ) , – (T7735 or T7730)
(FWD/DND or ) (T7735 or T7730)
(MESSAGE) – , (T7335)
(TRANSFER) CLEAR
(REDIAL or ) PREV (PREVIOUS)
(HOLD) END
(SP-PHONE or ) NEXT
(PROGRAM) PROGRAM
System Programming

6
Location of Controls with Overlay (Additional)
The picture below shows the features of the buttons of the KX-T7735 or KX-T7335 during programming.
Note
The KX-T7730 has the same overlay as the KX-T7735.
PROGRAM
SECRET ,
FLASH
CLEAR END NEXT
SELECT STORE PREV
PAUSE
HOLD
ADVANCED HYBRID SYSTEM
WXYZTUVPQRS
MNOJKL
GHI
DEFABC
KX-T7330
REDIAL SP-PHONE
123
456
78
0
9
FLASH
INTERCOM
TRANSFERPAUSE
121110
876
432
9
5
1
MESSAGE
AUTO/STORE
AUTO ANS/MUTE
VOLUME-
PROGRAM
SELECT
PROGRAM FLASH
PREV
OPER
END NEXT
PAUSE CLEAR
STORE
,
<KX-T7735>
<KX-T7335>
System Programming

7
Viewing the Display
The display gives you helpful information, such as the next step, previous entries, etc.
The KX-T7735 utilizes three information lines for programming.
The KX-T7730 utilizes one information line for programming.
The display capacity is 16 digits. If your entry is longer than 16 digits, the user can scroll the
display by pressing the Navigator Key ( ), or the or button.
<Display Example>
Button for Operation
/
(Navigator Key
or
CONF button)
NEXT (SP-PHONE)
or
(Navigator Key)
PREV (REDIAL)
or
(Navigator Key)
Display Move to:
001
Speed Dialing
00:9123456789012
001
Speed Dialing
99:81924857986
001
Speed Dialing
00:1234567890123
001
Speed Dialing
01:Not Stored
131
VM2(APT)Port
201
Transfer Recall
200
Hold Recall Time
Time:30 sec
200
Hold Recall Time
NEXT (SP-PHONE)
or
(Navigator Key)
/
(Navigator Key
or
FWD/DND button)
/
(Navigator Key
or
FWD/DND button)
System Programming

8
[011] System Speed Dialing Name Setting (Additional)
Description
Assigns a name to each System Speed Dialing number. The name will be displayed when
making a call by using the System Speed Dialing feature. It will also be used for the Caller
ID feature.
Selection
• Speed Dial Number: 00-99
• Name: 16 characters (max.)
Default
All speed dial numbers — Not stored
Programming
1. Enter 011.
Display: Speed Dial Name
2. Press NEXT.
Display: Speed NO?
3. Enter a speed dial number.
To enter speed dial number 00, you can also press NEXT.
Display example: 00:Not Stored
4. Enter a name.
For entering characters, please refer to “4.1.3 Entering Characters” in the Installation Manual.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5. Press STORE.
6. To program another speed dial number, press NEXT or PREV, or SELECT and enter
the desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Speed dial numbers are programmed in program [001] System Speed Dialing Entry.
• Each name has a maximum of 16 characters.
Feature References — in the Installtation Manual
System Speed Dialing
System Programming

9
[968] KX-T77xx Incoming Lamp Control (Additional)
Description
Enable or disable to flash the Message/Ringer Lamp when an extension is in the following
status:
– A call is waiting when Call Waiting Tone 1 is assigned.
– A call is incoming to Doorphone 4.
– A call with Caller ID information is waiting during a conversation
– No ringing when a call is incoming to a doorphone, but chiming a doorbell/door chime.
This programming is available for the KX-T77 series only.
Selection
•Disable (Message/Ringer Lamp — Off)/Enable (Message/Ringer Lamp — Flashing)
Default
Disable
Programming
1. Enter 968.
Display: T77xx Incom.Lamp
2. Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is displayed.
4. Press STORE.
5. Press END.
Conditions
None
Feature References
— in the Installtation Manual
Call Waiting
Caller ID Call Waiting
Doorphone Call
— in the Additional Instructions for the Doorbell/Door Chime Users
Doorbell/Door Chime
System Programming

10
Additional and Changed Information for System Programming
Programming Tables
[002] System Password
[309] Emergency Dial Number
[968] KX-T77xx Incoming Lamp Control
System Programming Additional and/or changed Information
[002] System Password Selection
• Password: 4 through 7 digits
(Note: The range of the password has changed from 0000-9999 to
0000-9999999 .)
[309] Emergency Dial Number Selection
• Code number: 1-5
• Emergency number: 24 digits (max.)
(Note: The maximum size of the emergency number has changed
from
11 to 24 digits .)
Default
2341
Parameter: 4 – 7 digits, consisting of 0 – 9
Code No.
1
2
3
4
5
Default
Parameter : 24 digits (max.),
consisting of 0 –9
Code 01=911
Other codes=Not Stored
Enable Disable
Default
Change
System Programming & Programming Tables