Panasonic KX-TMC40JX-W User manual

ORDERNO. KM40208935C3
TelephoneEquipment
KX-TMC40JX-W
TelephoneAnswering System
White Version
(for Asia, MiddleNearEast and otherareas)
SPECIFICATIONS

2002 Kyushu Matsushita ElectricCo., Ltd. All rights reserved.
Unauthorizedcopying and distribution isaviolation oflaw.
1. LOCATIONOF CONTROLS

2. DISPLAYS
Both the handsetand the base unitshowyou instructions and information on the displays.
These displayprompts are shownbelow.
3. CONNECTION
3.1. Connecting theHandset/ACAdaptor/TelephoneLineCord

-USE ONLY WITHPanasonicACADAPTORPQLV1BXZ.
-Use onlyaPanasonicHandset for theKX-TMC40BXW.
-TheACadaptor must remainconnectedat all times. (Itisnormal
for theadaptor tofeel warm during use.)
-Ifyour unitisconnectedtoaPBX whichdoes notsupportCallerID
services, you cannotaccess those services.
3.2. Connecting aCommunication Device
Ifyou connecta communication device (computer, modem, fax, etc.)to the telephone line, you
canconnectitthrough this unitusing the DATAjack.
Afterconnecting the handsetAC adaptorand telephone line cord, connectthe communication
device telephone line cordto the DATAjack.

-Make surethecommunication device isnotinuse beforeusing
thisunit(making calls, storing phonenumbersinmemoryetc.)or
thecommunication device maynotoperate properly.
4. SETTINGS
4.1. Dialing Mode

4.2. Timeand Date

4.3. LCD Contrast

4.4. Making Calls

4.5. Answering Calls

4.6. CallerIDService

4.7. UsintheCallerList

4.8. Viewing theCallerList

4.9. Calling Back from theCallerList

4.10. Dial Lock
4.10.1. Tocancel thedial lock
Followabove steps 1 through 3. Instep3, “ “will go out.
4.11. HowtoRelease theEstablishmentofDial Lock

4.12. FLASHButton

Note:forService ;Whenthere is no battery, a Flashfunction maynot operate appropriately.
5. DISASSEMBLY INSTRUCTIONS

ShowninFig.- ToRemove Remove
1LowerCabinet Screws (2.6 X12).....(A)X5
2MainP.C. Board The MainP.C. Board
3Operational P.C. Board Screws (2.6 X8).....(B)X6
6. TROUBLESHOOTINGGUIDE