Parrot CK3100 LCD User manual

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Installation manual:
Parrot MKi + Parrot
CK3100 range
CADDY
The VOLKSWAGEN CADDY marque and VOLKSWAGEN logo are the property of the VOLKSWAGEN France Group s.a or VOLKSWAGEN AG. This
document is only valid for the vehicle model CADDY year 2011 AND 2012, excluding all other models in the same range and excluding later
modifications made to the vehicle by the manufacturer.
The Parrot brand name and logos are the exclusive property of Parrot SA.

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly
30 min
Kit installation
30 min
Refitting
30 min
Testing
15 min
Total
1 hour 45 minutes
NO
ACC wire
NO
ISO
YES
UNIKA
FRONT SPEAKER
TEL mode
ALL
MUSIC mode
Fitting time / Main features
Tools
-TORX screwdriver
- Cutting pliers
- Crimping pliers
- Multimeter or Test lamp
- Pull through cord
- Electrical/amalgamation tape
- Soldering Iron
Plastic Trim Removal tools
FACOM / BOJO
Accessories required
To get the most out of your hands-free kit, we recommend that you update your
software regularly. The procedure for doing this can be found at
http://www.parrot.com/usa/support/downloads
Updating
"Please contact your retailer to purchase
accessories. List of retailers available at
www.certified.parrot.com"
Kram ref.
Dealer ref.
CK range
86 200
YY 138 CABL 1
MKi range
84 942
YY 138 CABL 2
Photos for illustration purposes
CK range MKi range

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly 1 / 3
Release the panel by inserting the
plastic pry tools underneath Remove screws 1 and 2
Unclip the cabin light and
disconnect it
Using the plastic pry tools, unclip
the vanity light from the left-
hand side
1
3
2
4
5 6
Using the plastic pry tools, unclip
the car stereo and air
conditioning surround.
Remove screws 3, 4, 5 and 6
around the car stereo.
Disconnect the connector and
the aerial cables
1 2
3
4
4
5

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly 2 / 3
Remove screws 7, 8, 9 and 10
around the air conditioning
control unit, then remove it
without disconnecting it
Open the storage compartment
under the steering wheel
Press down on the tabs inside to
release the box Pull up to unclip it
7
9
8
10
11 12
Using the plastic pry tools, unclip
the side panel of the dashboard
on the driver's side
Unclip the cover plate running
up the side of the door
7
8
9
10

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly 3 / 3
Remove the door seal
13
9 10

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Finding an ACC wire
Using a guide, feed an electric
wire from under the steering
wheel to the car stereo housing.
Feed the wire to the left into the
fusebox housing
Fit a 1.5 mm connector and insert
it into one of the small fuse
housings on the left-hand side of
the box (using the multimeter,
check that the +12 v is connected
to the ignition)
Reconnect the ACC wire using a
round male connector to the
blue wire of the adaptor in front
of the fuse holder
1
3
2

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Microphone feeding 1 / 2
Using a guide, feed the cable from
the windscreen to the cabin light
After cleaning the centre of the panel
where the rain sensor is connected,
attach the cradle supplied.
Using a guide, feed the cable
from the cabin light to the vanity
light
Using a guide, feed the cable
from the vanity light to the
driver's side door
1
3
2
4
5 6
Slide the cable along the driver's
side door while refitting the door
seal
Pass the cable through the
fusebox

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Microphone feeding 2 / 2
Using a guide, feed the cable from
the top of the dashboard to the
fusebox
7 8
Using a guide, feed the cable under
the steering wheel towards the car
stereo housing

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Feeding the accessory cable
Using a guide, feed the cable in
the top part of the glove
compartment through to the air
conditioning control unit housing
Make sure that the cable is long
enough
1 2

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 1 / 2
Connect the adaptor to the original connector
and connect all of the wires to the blue box as
shown in the diagram below. Test the assembly
before completing fitting and then slide
everything behind the air conditioning control
unit
1
Direct adaptor cable

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 2 / 2
Slide the cable behind the air
conditioning control unit
PLEASE NOTE: When refitting the
system, take care not to trap and
cut the cable
After cleaning the left-hand side
of the car stereo/air conditioning
surround, affix the mounting
(supplied)
2
4
3
12
!

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Testing
Before refitting the system, switch the kit on using the
ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - that the menu is displayed on the screen (language or
iPod)
2 - that the system can be muted (click in the blue box)
3 - that there is no sound coming from the speakers
4 - that the sound from the voice menu is coming out of the
front speakers
5 - then turn off the ignition, check that the kit switches off
and that the "goodbye" message appears on the screen (if
not, reverse the fuses on the kit's wiring harness)
6 - pair a telephone with the kit and make a call (check that
both the microphone and the kit are working)

CADDY
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Refitting
Refit the system using the following procedure:
1 - refit the panel next to the dashboard
2 - refit the panel on the left-hand side of the dashboard
3 - refit the storage compartment under the steering wheel
4 - reconnect and refit the cabin light (screws 1 and 2)
5 - refit the cabin light panel
6 - refit the vanity light
7 - refit the 4 screws (7, 8, 9 and 10) for the air conditioning control unit
8 –reconnect the adaptor and the aerials behind the car stereo and slip them
inside the housing (make sure that you do not trap and cut any screen wires)
9 - refit the 4 screws (3, 4, 5 and 6) for the car stereo
10 - refit the car stereo and air conditioning surround
12 - retest to check that the system is working correctly