Paslode PPNXi User manual

NEVER STOP BUILDING
PPNXi
SPECIALIST NAILER
www.paslode.co.uk
4303 MANUEL PPNXi _FINAL.indd 14303 MANUEL PPNXi _FINAL.indd 1 20/01/2021 11:3220/01/2021 11:32

2
PPNXi
SPECIALIST NAILER
Thank you for choosing a Paslode tool. The PPNXI specialist nailer provides an efficient safe way of installing hangers,
brackets and straps. The tool accurately delivers a hardened twist nail in the precise required location.
CONGRATULATIONS
THE TOOL
PPNXi Specialist Nailer
Lithium Battery
Lithium Battery Charger
Safety eye protection to EN166-F standard.
Allen Key
Instruction Manual
Tool Schematics
Safety Instructions
CE & UKCA Declaration of Conformity
Product weight 3.7 kg
Size / depth 381mm / 121mm
Power 77 J
Fastener length range 35 mm
Maximum Cycle rate per hour (xings) 1000 xings
Maximum Cycle rate per sec (xings) 2-3 xings
Magazine capacity 29 xings
Fuel cell capacity 1250 (-5°C) shots
Fixings per battery charge 13000 shots
Battery charge time 90 Min.
Battery type Lithium
Operating temperature range -15°C...+49°C
Peak Sound Pressure (EN 12549) LpCpeak 135 dB(C)
Workplace Relevant Emission, LpA 95 dB(A)
Vibration (EN ISO 8662-11) ahv 4,7 m/s²
TECHNICAL DATA
IN YOUR KIT
CONSUMABLES YOU NEED
Hardened Twist Nails
Ø = 3.4 mm
L = 35mm
IF YOU NEED EXTRA ACCESSORIES
Refer to www.paslode.co.uk for further information on your tool and FAQ.
Series-i
Fuel Cell
300348
Li-ion
Battery
018880
Impulse
Cleaning Kit
013690
Battery
Charger
018882
4303 MANUEL PPNXi _FINAL.indd 24303 MANUEL PPNXi _FINAL.indd 2 20/01/2021 11:3220/01/2021 11:32

3
PPNXi
SPECIALIST NAILER
PLEASE ADHERE TO SAFETY RECOMMENDATIONS & WARNINGS AT ALL TIMES
OFF
OFF
ON
ON
-
-
-
-
+
+
+
PPNXi
Ø = 3.4 mm
L = 35mm
Hardened Twist Nails
INDEX:
• Getting Started Pg 4-5 • Tool Lights Pg 5 • Tool Adjustment Pg 6-7 • Tool Maintenance Pg 8-9
• Trouble Shooting Pg 10 • Paslode Range Pg 11
4303 MANUEL PPNXi _FINAL.indd 34303 MANUEL PPNXi _FINAL.indd 3 20/01/2021 11:3320/01/2021 11:33

4
1 2
3
1 2
3
= 1250 (-5°C°)
CLICK !
CLICK !
PPNXi
Ø = 3.4 mm
L = 35mm
Hardened Twist Nails
GETTING STARTED
FUEL CELL CONSUMABLES
Check fuel is in date
(see base of fuel)
4303 MANUEL PPNXi _FINAL.indd 44303 MANUEL PPNXi _FINAL.indd 4 20/01/2021 11:3320/01/2021 11:33

5
= 13000 max
OFF
OFF
ON
ON
15 min. 2 500 max.
60 min. 10 000 max.
90 min. 13 000 max.
=
=
25% 50% 75% 100% 0 300
GETTING STARTED
BATTERY
LED LIGHTS
RESTING POSITION
If you need to rest or place the tool down, please place in the following position:
4303 MANUEL PPNXi _FINAL.indd 54303 MANUEL PPNXi _FINAL.indd 5 20/01/2021 11:3320/01/2021 11:33

6
-15°C
≤ T ≤
+49°C
1 000 /hour
3 300 /day
+
-
-
TOOL ADJUSTMENTS
ROTATING BELT HOOK
DEPTH OF DRIVE
4303 MANUEL PPNXi _FINAL.indd 64303 MANUEL PPNXi _FINAL.indd 6 20/01/2021 11:3320/01/2021 11:33

7
1
3
2
BANG!
BANG!
4
MAX 30°
MAX 0°
MAX 10° MAX 10°
ACTUATING THE TOOL
4303 MANUEL PPNXi _FINAL.indd 74303 MANUEL PPNXi _FINAL.indd 7 20/01/2021 11:3320/01/2021 11:33

8
7 8
109 11
013231
5 6
12
1 2 3 4
TOOL MAINTENANCE: FILTER
CLEANING KIT
013690
TOOL MAINTENANCE: FAN
PLEASE USE:
• CLEANING KIT 013690 AND THE O RING 013231
4303 MANUEL PPNXi _FINAL.indd 84303 MANUEL PPNXi _FINAL.indd 8 20/01/2021 11:3320/01/2021 11:33

9
22
23
15
19
20
17
14 16
18
21
TOOL MAINTENANCE: FAN continued.....
13
MAINTENANCE LIGHT RESET
RESET
The tool will flash green/red once the tool has red 50 000 shots. This maintenance light can be reset by holding the
start button for 10 seconds. Only reset once maintenance has been carried out on the tool.
>10s
4303 MANUEL PPNXi _FINAL.indd 94303 MANUEL PPNXi _FINAL.indd 9 20/01/2021 11:3420/01/2021 11:34

ISSUE: HOW TO CLEAR A NAIL JAM
BANG!
BANG!
pg 4 pg 5 pg 10.
Refer above
BANG!
BANG!
BANG!
BANG!
pg 6 pg 8-9
pg 8-9
10 Refer to www.paslode.co.uk for further information on your tool and FAQ.
pg 4 pg 5
Nail
pg 10
Fan
pg 8
pg 10
TROUBLE SHOOTING
ISSUE: TRIGGER WORKS HOWEVER FAN NOT WORKING AND NO NAIL COMES OUT
ISSUE: TRIGGER & FAN WORKING HOWEVER NO NAIL COMES OUT
ISSUE: FAN WORKS AND EXPLOSION HAPPENS HOWEVER NO NAIL
4303 MANUEL PPNXi _FINAL.indd 104303 MANUEL PPNXi _FINAL.indd 10 20/01/2021 11:3420/01/2021 11:34