PCE Instruments PCE-LRF 600 User manual

© PCE Instruments
PCE-LRF 600 Laser Distance Meter
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский, 中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 10 August 2018
v1.0
English

© PCE Instruments
Contents
1Safety notes........................................................................................... 1
2Introduction ........................................................................................... 2
3Device description................................................................................2
3.1 Device .............................................................................................................................. 2
3.2 Delivery contents .............................................................................................................. 2
3.3 LCD.................................................................................................................................. 3
4Technical specifications ...................................................................... 4
5Operation ............................................................................................... 4
5.1 Distance mode ................................................................................................................. 5
5.2 Speed mode ..................................................................................................................... 5
5.3 Changing the unit ............................................................................................................. 6
5.4Auto Power Off ................................................................................................................. 6
5.5 Changing the battery ........................................................................................................ 6
6Warranty................................................................................................. 6
7Disposal ................................................................................................. 6

© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
• The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
• The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
• Do not expose the device to shocks or strong vibrations.
• The case should only be opened by qualified PCE Instruments personnel.
• Never use the instrument when your hands are wet.
• You must not make any technical changes to the device.
• The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
• The device must only be used with accessories from PCE Instruments or equivalent.
• Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
• Do not use the instrument in explosive atmospheres.
• The measurement range as stated in the specifications must not be exceeded under
any circumstances.
• Don’t cleanse the outside of the lens with hands, please cleanse the lens with
appropriate lens-cloth. The outside lens should be cleansed with soft cloth.
• Observe correct battery polarity.
• The battery should be taken out if the DMT isn’t in use for a long time.
• The PCE-LRF 600 should be stored in a dry place when not in use.
• Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.

© PCE Instruments
2
2 Introduction
The PCE-LRF 600 is a metric-only rangefinding distance meter that measures distance and
determines the speed of moving objects. This laser rangefinding meter is Ideal for hunting,
shooting, golfing and more and is often purchased as a gift for sports and outdoor enthusiasts.
3 Device description
3.1 Device
1. Telescope eyepiece (inner—distance display) / adjustment wheel
2. Lens of the meter
3. Laser lens
4. Start key
5. Mode key
6. Battery compartment
3.2 Delivery contents
1 x PCE-LRF 600 laser rangefinding distance meter
1 x Carrying bag
1 x Wrist strap
1 x Cleaning cloth
1 x Battery
1 x User manual

© PCE Instruments
3
3.3 LCD
1) „Ready“ – Device is ready for measurement
2) „ “ – low battery level
3) „Range“ – Mode for distance measurement
4) „Speed“ – Mode for speed measurement
5) „ “ – Targeting aid
6) „ “ – shows if laser is active
7) „ “ – distance / speed / faulty measurement
8) „KMY“ – distance unit; M = metre and Y = Yard;
9) „Quality>>>>>>“ - Quality of measurement
10) „Km/h; m/s“ – speed units

© PCE Instruments
4
4 Technical specifications
Distance
Measurement range
6 ... 800 m
Accuracy
±1 m; ±0.2 %
Resolution
1 m
Speed
Measurement range
0 ... 300 km/h
Accuracy
1 km/h
Resolution laser type
905 nm
Binoculars
Ocular / eyepiece size
Objective lens size
16 mm
24 mm
Relative brightness
15.21 mm
Exit pupil size
3.9 mm
Magnification power
6x
Field of view
7°
Adjustment of ocular
± 4
General
Operating temp.
-20 ... 50°C / -4 ... 122°F
Power supply
1 x CR2 3V battery
Approx. weight
185 g / < 1 lb
Approx. dimensions
104 x 72 x 41 mm / 4.09 x 2.83 x 1.61 in
5 Operation
1. Adjust the monocular until you see your target clearly.
2. The PCE-LDF 600 has two keys: the Start key and the Mode key.
You can start the meter by pressing the Start key for a second. You will see the following
display:
The meter has two modes of measurement: distance and speed. Press the Mode key to select.

© PCE Instruments
5
5.1 Distance mode
After selecting distance mode by means of the Mode key, the word “Range” will appear in the
upper left-hand corner of the display. Press and release the Start key to start a measurement.
The measured data will appear in the in the bottom area of the display. By pressing the Start key
continuously, you will see all the current data on the LCD. When you release the Start key, you
will return to the same interface as before the measurement. The icon flashes when the laser
is scanning. If the measuring distance is too long and the reflectance of the object to be measured
is too low, the LCD will show “- - - ”. If the measuring distance is acceptable, the LCD will display
“Quality >>>>>>“. The more “>” you see, the more the stronger the reflection of the measured
object and the higher is the quality of the measurement. The maximum is 6, see the following
picture:
5.2 Speed mode
After selecting speed mode by means of the Mode key, the word “Speed” will appear in the upper
left-hand corner of the display. Press and release the Start key to start a measurement. The
measured data will appear in the in the bottom area of the display after approx. three seconds. If
“- - - ” appears instead of values, this means that the reflectance of the object to be measured
was too weak and that the meter was not able to determine a value. Make sure to target the
moving object when making a measurement, without interruption. Also try to stand as parallel to
the object as possible. If this is not observed, the reading might be falsified, which is partly due to
the changing angle. During the speed measurement, will flash. The quality indication will then
appear and the data will be displayed in the lower part of the LCD. During the speed
measurement, the display will look as follows:

© PCE Instruments
6
5.3 Changing the unit
“M” stands for metres and “Y” stands for Yards. These units can be changed by pressing and
holding the Mode key when you are in distance mode.
“Km/h” stands for kilometres per hour and “m/s” stands for metres per second. These units can
be changed by pressing and holding the Mode key when you are in speed mode. The resolution
for the readings in m/s is 0.1. The decimal sign is a “_” instead of a “.” Example: “12_8 M/S” means
“12.8 m/s”.
5.4 Auto Power Off
The meter will automatically turn of when not used for more than 20 seconds. This function cannot
be disabled.
5.5 Changing the battery
When the battery symbol flashes, the battery must be replaced. To do so, open the battery
compartment cover by pulling it down (away from the eyepiece). Take out the old battery and
replace it by a new one. Observe correct polarity. Re-install the battery compartment cover.
6 Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms.
7 Disposal
For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.

© PCE Instruments
7
PCE Instruments contact information
Germany France Spain
PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.
Im Langel 4 23, rue de Strasbourg Calle Mayor, 53
D-59872 Meschede 67250 SOULTZ-SOUS-FORETS 02500 Tobarra (Albacete)
Deutschland France España
Tel.: [phone] Téléphone: [phone] Tel. : [phone]
Fax: [phone] Numéro de fax: [phone] Fax: [phone]
[email protected] [email protected] [email protected]
www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol
United States of America United Kingdom Italy
PCE Americas Inc. PCE Instruments UK Ltd PCE Italia s.r.l.
711 Commerce Way suite 8 Unit 11 Southpoint Business Park Via Pesciatina 878 / B-Interno 6
Jupiter / Palm Beach Ensign Way, Southampton 55010 LOC. GRAGNANO
33458 FL Hampshire CAPANNORI (LUCCA)
USA United Kingdom, SO31 4RF Italia
Tel: [phone] Tel: [phone] Telefono: [phone]
Fax: [phone] Fax: [phone] Fax: [phone]
[email protected] [email protected] [email protected]
www.pce-instruments.com/us www.pce-instruments.com/english www.pce-instruments.com/italiano
The Netherlands Chile Hong Kong
PCE Brookhuis B.V. PCE Instruments Chile S.A. PCE Instruments HK Ltd.
Institutenweg 15 RUT: 76.154.057-2 Unit J, 21/F., COS Centre
7521 PH Enschede Santos Dumont 738, local 4 56 Tsun Yip Street
Nederland Comuna de Recoleta, Santiago, Chile Kwun Tong
Telefoon: [phone] Tel. : [phone] Kowloon, Hong Kong
Fax: [phone] Fax: [phone] Tel: [phone]
[email protected] [email protected] [email protected]
www.pce-instruments.com/dutch www.pce-instruments.com/chile www.pce-instruments.cn
China Turkey
PCE (Beijing) Technology Co.,Ltd PCE Teknik Cihazları Ltd.Şti.
1519 Room, 6 Building Halkalı Merkez Mah.
Men Tou Gou Xin Cheng, Pehlivan Sok. No.6/C
Men Tou Gou District 34303 Küçükçekmece - İstanbul
102300 Beijing Türkiye
China Tel: [phone]
Tel: [phone] Faks: 0212 705 53 93
[email protected] [email protected]
www.pce-instruments.cn www.pce-instruments.com/turkish