peerless-AV ACC-SB Guide

1 of 5 ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11
Model: ACC-SB, ACC-SB-M
AB
CD EFGHI
J
Description Qty. Part #
A
hook on bracket 1046-P1218
Bspeaker bracket 1 046-P1222
Cextension bracket 1 046-P1221
Dreinforcement bracket 1046-P1220
Elock bracket 1 046-P1219
FM5 x 6 mm socket pin serrated washer head screw 8 510-1114
G1/4-20 x 1/2" socket pin screw 2 520-1054
H1/4-20 x 3/8" socket pin screw 2 520-1109
I1/4" flat washer 2 540-9440
J4 mm allen wrench 1560-9646
Parts List
WALLARM
(NOT INCLUDED)
Installation and Assembly:
Speaker Bracket

2 of 5 ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11
C
1Lay display face down on a nonabrasive surface. Use detail below to determine if extension bracket (C) is needed.
NOTE: Top of speaker must extend below the bottom of the screen.
If extension bracket (C) is not needed skip to step 2 on page 3.
If extension bracket (C) is needed skip to step 2 on page 5.
D
D
1Use figures 1.1 and 1.2 to determine if reinforcement bracket (D) is needed.
If reinforcement bracket (D) is needed skip to step 2 on page 3.
If reinforcement bracket (D) is not needed skip to step 2 on page 5.
7.38”
(187 mm)
10.41”
(264 mm)
SUA745PU, SUA745PU-M Will Use Reinforcement Bracket
SUA750PU, SUA750PU-M, SUA765PU Will Not Use Reinforcement Bracket
D
Figure 1.1
Figure 1.2
MAKE SURE THAT
TOP OF SPEAKER IS FLUSH
WITH BOTTOM OF DISPLAY
SPEAKER
HORIZONTAL BRACKET
AND VERTICAL BRACKETS
NOT SUPPLIED

3 of 5 ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11
2Attach reinforcement bracket (D) to adapter bracket
(A) using two M5 x 6 mm socket pin serrated
washer head screws (F). 3Attach adapter bracket (A) to speaker bracket (B)
using two M5 x 6 mm socket pin serrated washer
head screws (F).
B
F
F
4NOTE: Make sure that speaker wires are
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 x 3/8" socket pin screw (H), and two
1/4 flat washers (I).
4NOTE: Make sure that speaker wires are
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 x 1/2" socket pin screw (G), and two
1/4 flat washers (I).
MOTION 6
MYTHOS-XTR50
BBG
H
SPEAKER WIRES
II
Attaching Reinforcement Bracket and Speaker Bracket
Attaching Speaker
SPEAKER WIRES

4 of 5 ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11
5
DETAIL 1
F
F
A
Hook adapter bracket (A) onto wall arm (not included) and secure using lock bracket (E) and two
M5 x 6 mm socket pin serrated washer head screws (F) as shown in detail 1.
E
WALLARM
(NOT INCLUDED)

5 of 5 ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11
2Attach adapter bracket (A) to extension bracket
(C) and speaker bracket (B) using two M5 x 6 mm
socket pin serrated washer head screws (F) as
shown below.
3
4Hook adapter bracket (A) onto wall arm (not included) and secure using lock bracket (E) and two
M5 x 6 mm socket pin serrated washer head screws (F) as shown in detail 2.
DETAIL 2
MYTHOS-XTR50 OR MOTION 6
(AS SHOWN) (NOT SHOWN)
F
A
G or H
B
SPEAKER WIRES
F
F
B
A
E
I
Attaching Speaker Using Extension Bracket
NOTE: Make sure that speaker wires are
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 socket pin screws (Gor H), and two
1/4 flat washers (I).
WALLARM
(NOT INCLUDED)