Pentair Rocean Reservoir User manual

1
Let’s get started!

What’s in the box:
Prefer video instructions?
Scan code
For a brief video on how to get your Pentair®Rocean®
Reservoir set-up. Fresh, ltered water is only a few
minutes away!
PentairRocean.com/HowTo
1 Base
2 Water tank
2) with pre-lter
3 Filter sleeve
4 Reservoir lter
4with dust cover
5 Drip tray
6 Spout
7 Power cord
1 2 3 4 5 6 7
2

3

First-time setup
Plug the power cord into the bottom of the base. If desired, wrap any excess cord using
the hooks on the bottom of the base.
Firmly press the spout into the base until metal is no longer visible.
Note: it may take more force than you’d think- things have to be snug to prevent leaks.
Step 1 | Insert the power cord
Step 2 | Insert the spout
4

Remove the lter dust cover. Insert the lter by simultaneously pushing down and
rotating clockwise. With the logo facing forward, place the lter sleeve over the lter until
it snaps into place.
Plug the power cord into an outlet. When the blue light ashes, your machine is on.
Step 3 | Insert the lter
Step 4 | Plug it in
5

Fill the water tank with tap water up to the max ll line.
We recommend moving your Reservoir to the edge of your sink so that you can easily
ush your brand new lter.* This way you can quickly ll the water tank and dispense the
excess water directly into the sink.
Step 5 | Flush the lter*
* DO I REALLY NEED TO FLUSH THE FILTER?
Trust us, we don’t want you to discard good water either, but this step is absolutely
worth doing when breaking in a new lter. Our lters are packed with activated
carbon, a ne black powder that can become dislodged during initial use leaving
behind black specs. Flushing your lter removes any loose carbon so you can enjoy
water that looks as good as it tastes.
After 1 cycle
6

Tap the button 4 times to automatically dispense 36 ounces of water (alternatively you
can hold the button down, but who has time for that?). Flush water through the system
until the tank is completely empty.
Repeat step 5 & 6 ve more times to remove any remaining loose
carbon, cloudiness, or discoloration.
Step 6 | Repeat
4x
5x
After 1 cycle After 3 cycles After 6 cycles
7

Your Reservoir is ready to use! Just press the button for better,
cleaner water that’s good for you and good for our planet.
You are all set!
8

9

Full lter Performance Data Sheet
Scan code
for the full lter performance data sheet.
PentairRocean.com/PDS
How did we pack such powerful performance into a lter
that ts in your hand? The secret is in our microporous
activated coconut-shell carbon lter medium.
Our InstaClean™ lter uses a small but powerful pump to
push water through a block of ultrane carbon micropores.
The result – better-tasting, cleaner water, without the wait.
Greater eciency with InstaClean™
Technology.
* System not intended to be plumbed-in and is for portable use only.
The Reservoir InstaClean™ ltration system is not intended to purify water.
Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system. The contaminants
or other substances removed or reduced by this water lter are not
necessarily in all users’ water.
IMPORTANT NOTICE: Read the performance data sheet and compare
the capabilities of this unit with your actual water treatment needs. It is
recommended that, before purchasing a water treatment unit, you have
your water supply tested to determine your actual water treatment needs.
No representation or claim is being made to the buyer regarding the health
or safety of the buyer’s water in the buyer’s home, or any representation or
claim that use of this product will mitigate any health or safety risk through
the use of this product.
System
Model #
4005799
4005767
4005801
(Replacement)
Chemical/
Mechanical
30 – 70 psi
(207 –483 kPa)
40 - 100 °F
(4 – 38°C)
0.5 gpm
(1.89 lpm)
390 gallons
(1476 L)
Capacity
Filter
Model #
Filtration
Function
Working
Pressure*
Operating
Temperature Flow Rate
10