Percussion Play Congas User manual

Surface Fixed
2. Attach Surface Fixing posts
to legs(1.2) (See Ground Fix
Post Installation Sheet)
1. Attach the steel leg to each
of the congas with the
M10x50 security screws,
square washers and PU
mounts. (1.1) (See Assembly
Guide)
Ground Surface
Small –850mm
Medium –850mm
Large- 850mm
Installation Instructions
(1.1)
Instrument
Components:
M10x50 Security Screw
x4
M10x50x3 Square washer
x4
Surface Fix
Components:
PU 200 Mount
PU 250 Mount
x2
x2
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
Played with hands
Congas
Page 1 of 2
Weight of heaviest part 3.8kg (Large drum Small Congas)
Weight of heaviest part 4.5kg (Large drum Medium Congas)
Weight of heaviest part 5.2kg (Large drum Large Congas)
BS EN 1176
14.8 Kg
15 Kg
20 Kg
M10 Barrel Nut
x1
M10x70 Security Screw
x1 Ground Anchors
not supplied
4. Fix to Surface using
recommended ground
anchors not supplied
3.Locate Plate in desired
location and mark holes to fix
to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided
2 Part Cover Cap
x4
(1.2)
Metric
Conversion:
178mm/ 7”
850mm/ 33”
1.5m/ 59”
Spares available from
percussionplay.com or from your
local distributor
850mm
from Plate

PPCONG FRONT PPCONG SIDE
PPCONG PLAN
M10x30 Pin torx X4
M10x50x3 square washer X4
COMPONENTS LIST:
PU MOUNT 200 X2
PU MOUNT 250 X2
M10x70 Pin torx X1
M10 Barrel Nut Pin torx X1
Surface Fixed
Instrument
Components:
Assembly Guide PPCONG
(1.1)
Surface Fix
Components:
M10x50 Security Screw
x4
M10x50x3 Square washer
x4
200 Mount
250 Mount
x2
x2
Played with hands
Congas
Page 2 of 2
TX 45 Driver Bit
Tools:
x2
BS EN 1176
14.8 Kg
15 Kg
20 Kg
M10 Barrel Nut
x1
M10x70 Security Screw
x1 Ground Anchors
not supplied
2 Part Cover Cap
x4
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Spares available from
percussionplay.com or from your
local distributor
M10x50 Security Screw X4

Surface Fixed
Duo
Page 1 of 3
Ground Surface
850mm
from Plate
Installation Instructions
(1.1) (1.2)
(1.3)
Instrument
Components:
M8 Nyloc Nut
x8
M6x20 Security Screw
x4
M6 Saddle Strap
x2
2 Part Cover
Cap
x8
6. Attach the 1 pair of beater
to the saddle strap on the leg.
(1.3)
28 Kg
1. Attach the steel legs to the
base of the instrument with
the M8 Nyloc Nuts and 2 part
security caps. (1.1) (See
Assembly Guide)
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
Pair Small Red
Beaters X2
Weight of heaviest part 14kg (Duo)
BS EN 1176
Metric
Conversion:
178mm/ 7”
232mm/ 9”
750mm/ 29 1/2”
850mm/ 33”
1.5m/ 59”
Spares available from
percussionplay.com or from your
local distributor
6. Attach the 1 pair of beater
to the saddle strap on each
leg. (1.3)
Ground Anchors
not supplied
2. Attach Surface Fixing posts
to legs(1.2) (See Ground Fix
Post Installation Sheet)
4. Fix to Surface using
recommended ground
anchors not supplied
3.Locate Plate in desired
location and mark holes to fix
to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided
Surface Fix
Components: M10 Barrel Nut
x2
M10x70 Security Screw
x2
2 Part Cover Cap
x8

2 Part Cover Cap X8
M10 Nut X8
M10x200 Threaded Bar X4
COMPONENTS LIST:
Saddle Strap X2
M6x20 Pin torx X4
PPDUO FRONT PPDUO SIDE
M8 Nyloc nut X8
M10x70 Pin torx X2
M10 Barrel Nut Pin torx X2
Surface Fixed
Assembly Guide PPDUO
(1.1)
28 Kg
Pair Small Red
Beaters X2
Duo
Page 2 of 3
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Instrument
Components:
M8 Nyloc Nut
x8
M6x20 Security Screw
x4
M6 Saddle Strap
x2
2 Part Cover
Cap
x8
TX 30 Driver Bit
x1
TX 45 Driver Bit
x2
Tools:
Ground Anchors
not supplied
Surface Fix
Components: M10 Barrel Nut
x2
M10x70 Security Screw
x2
2 Part Cover Cap
x8
750 232
Post
Centres
Spares available from
percussionplay.com or from your
local distributor

Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
Surface Fixed
Components:
Surface Fix Post Installation
(1.1)
12 3
Duo
Page 3 of 3
M10 Barrel Nut
x2
M10x70 Security Screw
x2
TX 45 Driver Bit
Tools:
x2
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
2 Part Cover Cap
x8

Surface Fixed
100mm
1785mm
2490mm
Ground
Surface
Installation Instructions
M10 Barrel Nut
x6
M10x50 Security Screw
x6
Surface Fix
Components:
1. Attach Surface Fixing plates
to the base of each chime(1.1)
(See Surface Fix Plate
Installation Sheet)
117 Kg
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
1.5m
Played with hands
Instrument
Components:
Emperor
Chimes
are pre-
assembled
Emperor Chimes
Page 1 of 2
Weight of heaviest part 25kg (XL Chime)
BS EN 1176
Metric Conversion:
100mm/ 4”
1.5m/ 59”
1785mm/ 70”
2490mm/ 98”
Spares available from
percussionplay.com or from your
local distributor
2 Part Cover Cap
x24
(1.1)
4. Fix to Surface using
recommended ground
anchors not supplied
2.Locate Chimes to desired
location and mark holes to fix
to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided

Ground Fixed
Surface Fix Plate Installation
(1.1)
M10 Barrel Nut
x6
M10x50 Security Screw
x6
Components:
Emperor Chimes
Page 2 of 2
TX 45 Driver Bit
Tools:
x2
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
2 Part Cover Cap
x24
(1.1)
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
12 3
Repeat Parts 1-3 for all 6 chimes
Thread Lock Solution
Required (Not Supplied)

Surface Fixed
Freechimes
Alto/ Soprano
Page 1 of 3
Components:
1. Carefully lay 2 x legs on a
level surface and check
distance between legs is
equal. Line up pre drilled
holes in the backboards with
the holes in legs and ensure
the instrument is aligned
square with the legs. Fix in
place using M8x40mm
screws supplied (see
installation guide)
Installation Instructions
6. Beaters can be fixed to
Steel posts with fixings
provided
KS1,2,
KS1 –800mm
KS2 –950mm
Adult - 1200mm
Ground Surface
Pair Small
Beaters X1 16 Kg
BS EN 1176
1.5m
Weight of heaviest part 8.35kg (Freechimes)
1.5m
Install Instrument
with 1.5m free space
(from widest point)
around it.
M6x20mm
Secure Screw
X4
Eye Straps
X2
M8x40mm
Secure Screw
X4
Ground Fix
Components:
Metric Conversion:
600mm/ 24”
800mm/ 31”
950mm/ 37”
1200mm/ 47”
1.5m/ 59”
2. Attach Surface Fixing posts
to legs (See Surface Fix Post
Installation Sheet)
4.Fix Surface Plate to level
surface using Coachscrews,
Rawlbolts, chemical anchors
or similar as deemed
appropriate by Installer.
(It is your responsibility to
ensure that the existing
surface is suitable to
receive the appropriate
fixing)
3.Locate Instrument in
desired location and mark
holes to fix to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided
M10x70 Security Screw
x2
M10 Barrel Nut
x2
2 Part Cover Cap
x8 Spares available from
percussionplay.com or from your
local distributor

COMPONENTS LIST:
Saddle Strap X2
M10x50 Pin torx X4
M6x20 Pin torx X4
M10x70 Pin torx X2
M10 Barrel Nut Pin torx X2
Surface Fixed
Assembly Guide PPFREC
16 Kg
BS EN 1176
Freechimes
Alto/ Soprano
Page 2 of 3
Pair Small
Beaters X1
TX 30 Driver Bit
x1
TX 45 Driver Bit
x2
Tools:
Components:
M6x20mm
Secure Screw
X4
Eye Straps
X2
M8x40mm
Secure Screw
X4
Ground Fix
Components:
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
M10x70 Security Screw
x2
M10 Barrel Nut
x2
2 Part Cover Cap
x8 Spares available from
percussionplay.com or from your
local distributor
M8 X 40 Pin Torx X4

Surface Fixed
Surface Fix Post Installation
M10 Barrel Nut
x2
M10x70 Security Screw
x2
Components: Ground fix tube
protrudes 300mm
from ground surface
that inserts into the
base of the chime post
TX 45 Driver Bit
Tools:
x2
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Freechimes
Alto/ Soprano
Page 3 of 3
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
12 3
Thread Lock Solution
Required (Not Supplied)
2 Part Cover Cap
x8