Percussion Play Surface Fixed Tubular Bells User manual

Surface Fixed
1. Assemble 3 Base sections
using M10 x 20 mm CSK
screws provided (1.1)
Installation Instructions
Tubular Bells will arrive on
site in pre assembled
Ground Surface
90 Kg
Pair Large Red
Beaters X1
Instrument
Components:
Tubular Bells
are pre-
assembled
Weight of heaviest part 30kg (ALU Base)
Tubular Bells
Page 1 of 2
BS EN 1176
2.Locate Base in desired
location and before attaching
the bells.
Spares available from
percussionplay.com or from your
local distributor
3. Using the M10x 40 screw and
Barrel Nuts to attach each of
the 9 legs to the base (1.2)
1.2
4. Make sure that all fixings are
tightly secured and thread
locking solution used if
required.
1.1
M10 Barrel Nut
x9
M10x40 Security Screw
x9
M10x20 CSK Security Screw
x8
Surface Fix
Components:

Surface Fixed
Assembly Guide TBEL SF
90 Kg
Instrument
Components:
Tubular Bells
Are Pre-
assembled
Tubular Bells
Page 2 of 2
BS EN 1176
Surface Fix
Components:
Spares available from
percussionplay.com or from your
local distributor
Pair Large Red
Beaters X1
M10 Barrel Nut
x9
M10x40 Security Screw
x9
M10x40 Pin torx X9
M1 0 x2 0 CSK N u t Socket X8
M1 0 Ba rr el Nut Pin torx X9
COMP ONE NTS LIST:
M10x20 CSK Security Screw
x8
TX 45 Driver Bit
Tools:
x2