Percussion Play Grand Marimba User manual

Ground Fixed
Installation Instructions
10x38mm
Secure Screw
X4
Instrument
Components:
Pair Large Red
Beaters X2 48 Kg
Spares available form
percussionplay.co.uk or from
your local distributor
Grand Marimba
Page 1 of 3
BS EN 1176 M10x200 Bolt
x8 x16
M10 Barrel Nut
x4
M10x70 Security Screw
x4
Ground Fix
Components:
M10x100 Security Screw
x4
M10x40 Security Screw
x4
M10 Flanged Slide Bearing
x4
3.Excavate 4 holes for the
Steel legs 200mm diameter
by 400-550mm deep
depending on Key stage, in
desired location upon
decision from customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
Weight of heaviest part kg (Grand Marimba)
KS1,2,
KS2 - 400mm
KS1 - 550mm
Install Instrument
with 1.5m free
space (from widest
point) around it.
1.5m 1.5m
1.5m
1.5m
1. Attach the steel legs to
each end of the instrument
with the M10x100 security
screws. (1.1) (See Assembly
Guide)
2. Attach Ground Fixing
posts to each of the legs (See
Ground Fix Post Installation
Sheet)
5. Once happy with location
of the Instrument, fill holes
using rapid hardening
concrete. Be sure to
compact concrete around
legs and leave to dry
according to manufactures
guidelines.

Ground Fixed
Assembly Guide PPGMAR
10x38mm
Secure Screw
X4
Instrument
Components:
Pair Large Red
Beaters X2 48 Kg
Spares available form
percussionplay.co.uk or from
your local distributor
Grand Marimba
Page 2 of 3
BS EN 1176
PPGRAM FRONT
PPGRAM SIDE
M10 Nut X16
M10x200 Threaded Bar X8
M10x70 Pin torx X4
M10 Barrel Nut Pin torx X4
COMPONENTS LIST:
5x40 Pin torx X4
M10x40 Pin torx X4
M10 Black Slide Plastic Bearing X4
M10x100 Pin torx X4
M10x200 Bolt
x8 x16
M10 Barrel Nut
x4
M10x70 Security Screw
x4
Ground Fix
Components:
M10x100 Security Screw
x4
M10x40 Security Screw
x4
M10 Flanged Slide Bearing
x4
TX 25 Driver Bit
x1
TX 45 Driver Bit
x1
Tools:

Ground Fixed
Components:
Ground Fix Post Installation
(1.1)
M10x200 Bolt
x8
M10 Nut
x16
M10 Barrel Nut
x4
M10x70 Security Screw
x4
1 2 3 4
5
Insert M10x 200 Threaded
bar into pre drilled holes
in Ground Fixing Post
Fix M10x 200 Threaded
bar in place using M10
Nuts
Fill hole with fast drying
concrete to manufacturers
specifications.
Locate the Ground fix Post
into the leg of the
instrument.
Fix instrument to Ground
fix post using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
450
50
350
250
Aggregate
Concrete
Excavate 6 holes with a
250mm diameter tapering
down to 350mm diameter
and 450mm depth
Compact base of hole with
50mm of aggregate.
Lower ground Fix post
attached to instrument
into hole (check
instrument straight and
level before filling with
concrete)
6 7
Duplicate points 1-7. Grand Marimba
requires 4 Ground Fix Posts
400mm min depth
TX 45 Driver Bit
Tools:
x1
BS EN 1176
Grand Marimba
Page 2 of 3